Grill Heating Element

first, I had to remove complete frame from grille. Then had to remove old elements. Then I had to
remove all screws which required both a nut screwdriver and a regular screwdriver. After elements were installed had to put all back together. It was an easy fix.

Remove about six to eight screws in pan, and four screws in the on off knobs lift up. should exspose wires and ground with these two items lifted off. Two nuts on element take of to loosen element. Unhook wires. reverse and put back together. Can be a bit dirty job but very easy. Parts came in one day. One hour job tops.