Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Melissa M - May 2, 2023
Verified Purchase
Easy Repair
Second switch to need replacing on my Jenn Air downdraft range. Easy DIY repair. I'll be back when the next switch goes!
★★★★★
★★★★★
Mark C - August 13, 2020
Verified Purchase
easy replacement
phillips screwdriver only tool required, easy replacement. Switch seems cheesy for heat/abuse it must withstand...my wife broke it cleaning, replacing knob, metal clips on switch slipped, allowing unit to fall apart inside console...oven is ten years old...
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Switch shaft broke off
Was very good. I removed the screws from the switch panel and switch, with phillips screw driver and changed wire connectors from the old switch to the new switch and installed new switch in the front panel and reinstalled the panel.
Other Parts Used:
Delbert from Nixa, MO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
17 of 25 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
De
September 6, 2017
The broiler went out years back, saw signs of burnt wires around the stove opening areas, replace the element(s), top and bottom and some wiring, still never worked right, nor has the temp probe. Recently the broiler came on and the stove went into panic mode and shut down, hit the panel switch to reset/recycle came on and within minutes the broiler is going full on, bottom not so much. Again recycled the switches ...still regardless of setting on temp and in bake or the convection settings, the broiler is coming on full blast . and goes into panic shutdown. so, is this repairable and how? i do not want to re-pipe another jennair, nor any other down-draft.
For model number JES9860BAS
Hi De,
Thank you for your inquiry. In this situation I would check the electronic control board, the temperature sensor and both the broil and bake elements to see which parts are causing the issue. If you cannot find the issue I would recommend you contact a technician to see what is going on. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
