Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
December 10, 2017
Large big burner on right stays on at highest temperature.Is this considered a dual burner? What part should I purchase for burner to work properly?
For model number JES9800AAW
Hi Frank, Thank you for the question. The Large right front burner is the Dual Burner. I suggest replacing the switch that controls the burner, Part Number: PS2003583. Good luck with the repair!
The pin between the infinite switch and the knob is broken. Can i buy only that pin?
For model number YGY399LXUS03
Hello Andre, thank you for your question. That pin slides into the back of the knob itself, and is a part of the knob. You would have to order the knob to replace that pin/clip. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Joey
July 29, 2021
I changed the bake element ( it at exploded), i verified de long sensor ( 1k ohms=ok), but the new element will not work. What else should i check? Thank you.
For model number JES9900CCS02
Hi Joey,
Thank you for your question. If you have changed the bake element and verified that the sensor is fine, you will need to check the electronic control board and the wiring between the parts to see which one is causing the issue. We hope this helps! If you have any questions, please let us know.
Hi the big dual burner on the right closest to you stays on high all the time
I think it the dual switch what do you recommend, thanks
For model number YGY397LXUS03
Hello Dale, thank you for your question. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11754776. We hope to hear from you soon.
My cooktop is busted & also inside oven light does not work, the right front burner does not work either. Can u tell me the part #s & also if i need to just buy the switch first to c if that’s the problem before but i g the surface element?
For model number JES9900BAB
Hello Patty, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS2330678 for the cooktop and Part Number: PS11744433 for the oven light. Only way to know if the element Part Number: PS11764915 or the switch Part Number: PS11744272 is defective is to test them with a multi meter to check the continuity. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ellis
February 22, 2019
Is this the control for the "dual" diameter heating element?
For model number JES9800CAS02
Hello Ellis, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11744412. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Stephen
June 7, 2019
Looking for a new controller/switch for the left front triple element.
For model number KERS505X
Hello Stephen, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11752298. Hope this helps!
The pin of the right hand knob that controls the right front burner is broken off and the knob is no where to be found . I know I need to order the knob but what part do I need to repair or replace the broken pin or stem . Thank you
For model number MET8665XS00
Hello Mick, thank you for reaching out. As the pin is broken, you need top replace the element control switch, part number PS11744412. Also, the knob is in two colors. Part number for the black color control knob is PS2580579, and for the white color is PS2580578. We hope this information helps!
I need a switch for the front left burners. They are the dual ones that are 9 1/2" and 6", one inside the other. On the switch it has two numbers. 50 55073 170 and 7450 P011-60. It's going to take longer for me to find the part than replace it. Thanks for your help.
For model number MET8665XW00
Hello Nile, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11744412. For your model this is used for the Left front Element. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Customer Repair Stories
Average Repair Rating: 3.0 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
center element of triple burner was not working.
I pulled the unit out from the wall. Took the screws out along the sides. Removed screw holding the front controls loose. First I changed the control switch which was very easy. Two screws and a couple of wires. The burner was a bit more tricky. I had propped the glass cook top up so I would not have to disconnect to many wires. Took out the screws holding the burner in place and disconnected the wires. I removed the clips from the old burner and attatched them to the new burner, then reinstalled the new burner. The only real problem was the wires. I forgot the order of a couple of them. I was able to check on line and get the correct order.
took off nobs, pulled stove out 2 inches to access front side screws,( has 1 philip screw on each side end and four nut screws under panel) pulled panel out and flipped forward and down, all switches exposed and took apart broken switch and installed new switch(PAY ATTENTION TO WIRING PATTERN), reverse order for install back. bingo!
Other Parts Used:
George from SHELTON, WA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
6 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
element burnt out
It was fairly easy if you a handyman there is a few things to to figuer out like taking the glass top off once that was done and you can see the elements it's easy to do from there.
