Average Repair Rating: 2.4 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No clock, and No oven control
Checked power. Had power to the oven, but no response from the control panel (Clock). Noticed that lower oven light was intrmittent. Ordered parts. When parts arrived, removed power, Removed front panel (three screws). Replaced old control panel and lower oven indicator light, Replaced panel. Turned power back on, AND IT WORKS.
thermostat was not allowing the ovn to hold temperture.
Removered top back panel, cover plate and half of the back plate. Replaced the thermostat and light lens and light indicator. Replacement of ordered parts was fast and easy. Delivery was fast and easy. All factors rate a 10. Thanks for the speed in completing my order.
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Samuel
December 9, 2017
The clock light on everything seems to be working. I turn the rear burner switch on (the right side) and it makes funny sounds and then the clock light in the panel goes out. After a minute or so the panel clock light comes back on with a power interruption notice to reset the clock. Do you have any suggestions?
For model number MER6769BAW
Hello Samuel,
Thanks for your question. It sounds as if you may be having a wiring issue with the switch for the rear burner. You may want to examine and test the wiring after unplugging the oven to see if everything is intact, as we doubt it is an issue with the timer itself.
I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bev
November 25, 2019
"on indicator" light stays on
For model number MER5751CW
Hello Bev, Thank you for the question. In most cases if the indicator light will not turn off, the burner switch that was used when the issue started is defective and will need to be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Samuel
August 4, 2017
Light below the 2 heating elements switches stay on when switch is turned off.
For model number MER6769BAW
Hi Samuel,
Thank you for your inquiry. I would say that you would have to replace your Indicator Light then. They are they own separate switch so if it is not working correctly, this part is the likely culprit. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
November 25, 2017
Open top oven door after you close light stays on. Need light switch
For model number MER6772BAW
Hi Terry,
Thank you for your question. I have posted the link to your light switch down below for you. I hope that helps. Good luck with your repair.
The On Indicator light does not come on. The oven is working but takes a very long time to preheat (~ 1 hour), and the stove top burners also take a very long time to heat up enough to boil water.
I would very much appreciate if someone can let me know a possible solution, please? Thank you!
For model number MAYTAG MER5555RCW
Hello James, thank you for reaching out. The issue seems to be with the Temperature Sensor and you may need to replace it, the part number is PS1570174. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.
Left front control indicator light flickers when turned on. I have exposed front panel and all wires are good and tight on indicator. Nothing looks bad. All other indicators work fine. Will replacing indicator switch correct this problem?
For model number JES9800BAS
Hi Kevin, thank you for getting in touch. Most probably, the issue is with the indicator light, part number PS11744053, you may need to check this part via a continuity test to fix the issue. We hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
