See part 3 in the diagram
( Grid squares measure 1x1 inch )
Indicator Light
$11.07
In Stock
In Stock
Get this part fast. Average delivery time via standard shipping: 1.8 days.
PartSelect Number PS11744053
Manufacturer Part Number WP74004153
Manufactured by
Whirlpool
Troubleshooting
This part works with the following products:
Range, Wall Oven, Cooktop, Microwave Oven Combo.
This part works with the following products:
Maytag, Whirlpool, Jenn-Air, Magic Chef.
Part# WP74004153 replaces these:
74004153, 7407P077-60, 7407P101-60, 7407P136-60
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Samuel
August 4, 2017
Light below the 2 heating elements switches stay on when switch is turned off.
For model number MER6769BAW
Hi Samuel,
Thank you for your inquiry. I would say that you would have to replace your Indicator Light then. They are they own separate switch so if it is not working correctly, this part is the likely culprit. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Samuel
December 9, 2017
The clock light on everything seems to be working. I turn the rear burner switch on (the right side) and it makes funny sounds and then the clock light in the panel goes out. After a minute or so the panel clock light comes back on with a power interruption notice to reset the clock. Do you have any suggestions?
For model number MER6769BAW
Hello Samuel,
Thanks for your question. It sounds as if you may be having a wiring issue with the switch for the rear burner. You may want to examine and test the wiring after unplugging the oven to see if everything is intact, as we doubt it is an issue with the timer itself.
I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Bev
November 25, 2019
"on indicator" light stays on
For model number MER5751CW
Hello Bev, Thank you for the question. In most cases if the indicator light will not turn off, the burner switch that was used when the issue started is defective and will need to be replaced. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Terry
November 25, 2017
Open top oven door after you close light stays on. Need light switch
For model number MER6772BAW
Hi Terry,
Thank you for your question. I have posted the link to your light switch down below for you. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
Average Repair Rating: 2.4 / 5.0, 3 reviews.
What's this?
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
No clock, and No oven control
Checked power. Had power to the oven, but no response from the control panel (Clock). Noticed that lower oven light was intrmittent.
Ordered parts.
When parts arrived, removed power, Removed front panel (three screws). Replaced old control panel and lower oven indicator light, Replaced panel. Turned power back on,
AND IT WORKS.
Ordered parts.
When parts arrived, removed power, Removed front panel (three screws). Replaced old control panel and lower oven indicator light, Replaced panel. Turned power back on,
AND IT WORKS.
-
Zaven from Fairfax Station, VA -
Difficulty Level:Easy -
Total Repair Time:1- 2 hours -
Tools:Pliers, Screw drivers -
17 of 36 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
thermostat was not allowing the ovn to hold temperture.
Removered top back panel, cover plate and half of the back plate. Replaced the thermostat and light lens and light indicator. Replacement of ordered parts was fast and easy. Delivery was fast and easy. All factors rate a 10. Thanks for the speed in completing my order.
-
JERRY from VISTA, CA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver, Screw drivers
-
4 of 10 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Oven Control Panel broken Ceramic Stove top & burner indicateor light&ens
I don't want to give Instructions!
Only that we took pictures to use as needed to be sure we knew how to put it all back together!
Only that we took pictures to use as needed to be sure we knew how to put it all back together!
-
Vicki from PUYALLUP, WA
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers
-
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11744053
Manufacturer Part Number: WP74004153
Manufacturer Part Number: WP74004153
Brand
Model Number
Description
Kenmore
62946775693
Range
- Kenmore Range/Stove/Oven Model 629.46775693 (62946775693, 629 46775693) Parts