Part Location Diagram of WP74001574 Whirlpool Round Snap Nut - Black
See part 10 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Round Snap Nut - Black

$17.11
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11743981
Manufacturer Part Number WP74001574
Manufactured by Whirlpool
Troubleshooting
This part works with the following products:
Range, Wall Oven, Microwave Oven Combo.
This part works with the following products:
Maytag, Jenn-Air, Whirlpool, Kenmore.
Part# WP74001574 replaces these:
7103P141-60, 74001574
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.6 / 5.0, 3 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
changing stove and dishwasher to match new frig.
I actually replaced parts on my black double stove to make it into stainless. We purchased a new frig and needed to replace parts on our stove and dishwasher so they would match. They look beautiful, all the parts shipped when they were suppose too. Ordering from this company was top notch. Would order again if needed.
Other Parts Used:
Exterior Door Panel - Stainless Steel Door Handle - Stainless Steel Control Panel - Stainless Exterior Upper Door Kit - Stainless Steel Exterior Lower Door Kit - Stainless Steel Screw
  • Ronald from Northfield Center, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
38 of 71 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Handle to top oven coming off
It wasn't the handle that was broken, it was what the handle was attached to that was. I removed the door by opening to first detent and just lifting the door upward. Once off, I removed the screws on the top sides and underneath - a total of 9. This allowed me to remove the edging on the sides and underneath - the front glass came with it as well. Then I removed the Top trim by removing a screw on each of the sides and two on the front - this was the piece that was broken. Since I had already disassembled most of the door, I went ahead and dismatled the rest so that I could clean everything. The pieces that would fit went into the dishwaser and the rest (including the glass) I washed by hand (except the white insulation pieces of course). I did take apart the double glass panel by lifting up on a bent tab on one of the corners - this allowed me to clean the insides as well as the groves in which the glass sat. After everything was clean, I reassembled everything in the reverse order substituting the new trim for the old.

Notes: The top of the trim piece has two diferent screws - two short ones that screws into the trim piece itself and two that go through to the door metal. The screw that I ordered ended up being one of the short ones and I wanted the other. The snap nut was correct, and was what the longer screw to the trim actually grabs on to. I ended up using one of my own screws that fit like a dream, but wasn't painted white. The other note is that the sheet metal that the trim piece screws into from the front was slightly stripped. All I had to do was to place the metal on a hard surface and hit the holes with a hammer to bring them back into a usable form - not ideal, but worked nonetheless.
Other Parts Used:
Door Top Trim Screw - White
  • Robert from Dayton, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
10 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken handle
took out window replaced with handle and screws parts were expensive especiall screws and nuts but better than a new oven
Other Parts Used:
Square Snap Nut - Black Screw Screw
  • Scott from Smithtown, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
5 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Be the first to ask our experts a question about this part!

Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743981
Manufacturer Part Number: WP74001574
Brand
Model Number
Description
Kenmore
22-98002
Range - Kenmore Range/Stove/Oven Model 22-.98002 (2298002, 22 98002) Parts
Kenmore
22-98009
Range - Kenmore Range/Stove/Oven Model 22-.98009 (2298009, 22 98009) Parts
Kenmore
62260002600
Range
Kenmore
62260003600
Range
Kenmore
62260008600
Range
Kenmore
62260009600
Range
Kenmore
62945765
Range
Kenmore
62945765690
Range
Maytag
62945766
Range - KENMORE COOKING
Maytag
62945769
Range - KENMORE COOKING
Kenmore
62945775
Range
Kenmore
62945776
Range
Kenmore
62945779
Range
Maytag
62946775
Range - KENMORE COOKING
Kenmore
62946775690
Range
Kenmore
62946775693
Range - Kenmore Range/Stove/Oven Model 629.46775693 (62946775693, 629 46775693) Parts
Maytag
62946776
Range - KENMORE COOKING
Maytag
62946779
Range - KENMORE COOKING
Kenmore
62946795
Range
Kenmore
62946796
Range
Kenmore
62946799
Range
Kenmore
62960002600
Range
Kenmore
62960002601
Range
Kenmore
62960002606
Range
Kenmore
62960003600
Range
Kenmore
62960008600
Range
Kenmore
62960008601
Range
Kenmore
62960008606
Range
Kenmore
62960009600
Range
Kenmore
62960009601
Range
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service