A device that protects a motor from overheating due to an overload condition in the machinery.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will Not Start
This part works with the following products:
Refrigerator.
This part works with the following products:
Maytag, Amana, KitchenAid, Crosley.
Part# WP67002527 replaces these:
67002527, 8171141
Customer Repair Stories
Average Repair Rating: 4.1 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
compressor not cycling on/compressor not pumping refrigerant
Using a nut driver I removed the lower back panel to gain access to the compressor.Removed a clip that held Run Capacitor and Overload Relay in place on the compressor.I removed the capacitor first then pulled the relay off from the compressor.Then I unplugged the wire harness from the relay.This job is very simple if you have original replacement parts in hand to re-install.PartSelect provided me with the exact replacement parts... Update: My refrigerator has been running 6 weeks now.Soon after I sent the note above I had a Technician check for refrigerant in the system.There was none!The Technician,who replaced my evaporator-heater in November failed to plug properly the port on the compressor.So,this thing is now running better than before.It now makes ice in the same container at the same setting,in 6 hours instead of 8 hours.
Quit cooling ,had a click noise when it tryed to turn on compressor
removed the rear panel and replaced the part on the compressor and replugged the wires.Easy!
Other Parts Used:
Charles from Knoxville, TN
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers
7 of 7 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator suddenly quit
I took off the back and unsnaped the old relay and pluged in the new one.The part was recieved really fast.
Other Parts Used:
Gary from Franklin, NE
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
4 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank Norwood
November 21, 2018
The compressor won’t kick in unless i let it sit for a couple of hours. Then it will cool down to the correct temp. Then when it warms and it’s time to cool back down, all the fans come on but the compressor won’t kick on. I’ve already replaced the run capacitor. What am i missing?
For model number ARS2661BW
Hello Frank, thank you for your question. It sounds like the temperature control thermostat is bad. The thermostat regulates the temperature in the unit and when it gets below what the fridge is set for, the thermostat tells the compressor to kick in and start up again. We would recommend replacing this part number PS11738492. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
