Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Norma Knab
December 10, 2019
When i push my start/ enter button for my oven, it will not come on after 5 seconds. It takes me trying to hold in or move my finger up and down to come on. Long time to get button to work
For model number Sf315pemw1
Hello Norma, thank you for your question. If the button is the issue, and moving your finger around will activate it eventually that means the button is failing and the electronic control board should be replaced. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Cora
December 11, 2018
My oven (bake) does not turn on; however, the custom broil works fine. I replaced the igniter but it still does not work. What is my problem?
For model number sf315pepwo
Hi Cora,
Thank you for your question. If the oven is not heating correctly, then the issue is likely with the oven sensor, sometimes called the oven thermostat, and you will need to check it with a multimeter. When testing the sensor with a multimeter, the sensor should be tested at room temperature and it should be unplugged from the oven. You will need to measure the resistance between the two prongs at the end of the sensor connector. Replace the oven sensor if the reading is less than 900 Ohms or more than 1200 Ohms. If it is not the sensor, you will need to check the electronic control board, the oven igniter and the gas valve. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
AARON
December 7, 2019
Oven doesn't turn on, no heat. Broiler doesn't work either? What needs to be replaced? How much will it cost?
For model number SF315PEPQ0
Hello AARON and thanks for writing.
It sounds like a faulty oven ignitor PS11770066 check and replace if needed. You also need to check the oven sensor # PS11749737. It is recommended to replace both parts at the same time. We hope this helps. Please contact us anytime.