Product Description
Fabric Softener Dispenser Specifications
This parts fits on top of the agitator.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Does not dispense fabric softener or detergent | Will not drain
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, Kenmore, Inglis.
Part# WP63594 replaces these:
AP6010164, 21032, 63594, 8226
Customer Reviews
Filter By Rating:
- < Prev
- 1
- 2
- 3
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Vincent N - January 18, 2023
Verified Purchase
Perfect
It’s an older washing machine so it was a shot in the dark…it fit perfectly!! Very pleased
Manon J - September 5, 2022
Verified Purchase
Easy
It was the right part
Daniel M - June 4, 2022
Verified Purchase
Easy to install
Easy to install and fits like a charm. Works great !
Donald G - May 6, 2022
Verified Purchase
Quick delivery and quick installation
Great quality part!
Kayode B - February 23, 2022
Verified Purchase
Great part, worked as expected
The Part arrived quite quickly and fit perfectly. Makes me wonder why I did not get it earlier.
René M - February 6, 2021
Verified Purchase
Easy repair , thanks !
Very good service , fast shipping, good piece and easy to install, thanks!
Sandra Q - January 26, 2021
Verified Purchase
Easy fix!
The part came in faster than expect, in excellent condition and was exactly what I needed.
Linda T - December 10, 2020
Verified Purchase
easy installation
Part fits perfectly thank you
Trudy P - October 10, 2020
Verified Purchase
Very fast delivery
My appliance is working great
MICHAEL N - August 28, 2020
Verified Purchase
Great value.
Works great.
- < Prev
- 1
- 2
- 3
- Next >
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 13 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Top part of agitator was not locking in and turning
Remove top "cap" on agitator to expose the bolt that holds the agitator to the drum shaft. Undo the bolt and pull out the agitator. Disassemble, toss the old parts and install the new parts in reverse order. Repair took less than 5 minutes and we can now do full loads of laundry again!
Other Parts Used:
-
Glenn from Merrick, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
47 of 55 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
just needed a new softener dispenser
ordered part on wednesday. it shipped to me thursday. pop the old one off, popped the new one on. slick and easy !!!
thanks
thanks
Other Parts Used:
-
scott from brooklyn, CT
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
11 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
aggitator stripped, not turning
removed the cap and unscrewed locking fitting. Removed aggitator dogs and replaced with new and reassembled.
Other Parts Used:
-
Hugh from Auburn, MI
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Socket set
8 of 8 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had a broken fabaric softener dispenser
The dispenser ring was loose due to the broken plastic dispenser. Replacement was too easy.
Removed the old, and snapped the new one in place. Took all of 1 minute. Now I'm back up and running
Removed the old, and snapped the new one in place. Took all of 1 minute. Now I'm back up and running
Other Parts Used:
-
Brian from Bridgewater, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
7 of 7 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Despenser fell into drum an cracked,ther after it would not stay on the agitator
Actually I had been out shopping , came home, and my husband suprised me by having it done.
The ease and quickness that we esperienced in ordering and recieving the part was quite remarkable.
We use all Sears appliances and they are all about 15 yrs old and still in very good service,
Other than the despenser... we had no other
operational problems.
It was the personal online help that was the most surprising.. what a great thought. They found my part and part # so quickly.
The ease and quickness that we esperienced in ordering and recieving the part was quite remarkable.
We use all Sears appliances and they are all about 15 yrs old and still in very good service,
Other than the despenser... we had no other
operational problems.
It was the personal online help that was the most surprising.. what a great thought. They found my part and part # so quickly.
Other Parts Used:
-
Peggy from rockford, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Missing Fabric Solfener Dispenser & Chipped paint
-
Patrick from SACRAMENTO, CA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
4 of 6 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The fabric softener dispenser quit working.
I ordered the dispenser and it arrived within 24 hours. Amazing. It simply snaps onto the top of the agitator. Push the blue lock ring down to lock it in place and you are done. It works perfectly.1
Other Parts Used:
-
Stephen from Columbus, IN
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
3 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fabric softener dispenser broke.
Placed the new dispenser in since the broken one had popped off.
Other Parts Used:
-
C. E. from REEDLEY, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replacing a fabric softener dispenser
A snap! I slipped the dispenser on the agitator, pressed the aqua ring down and it was installed.
Other Parts Used:
-
Glynnette from Hyde Park, MA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
2 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitaor not functioning everything good.
Used a hand truck to lay washer on its side removed motor assembly and hoses,unplugged all wiring harness assembly. Using small hammer positioned new couplings on transmission and motor flush to end of shaft. Applied new insert on transmission coupling and positioned motor applied mount straps and screws. Reconnect wiring harness assemblies set upright and dry run cycle. Everything good washed 3 loads very happy no laundry mat visit.
Other Parts Used:
-
Michael from Kingman, AZ
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mayra
November 9, 2017
Hello. I need to know where to put the fabric softener in the washing machine
For model number 11029852991
Hi Mayra, Thank you for the question. The fabric softener goes into the fabric softener dispenser at the top of the agitator. If you do not currently have the dispenser you can order PartSelect Number PS11743341 and use it on your agitator. Hope this helps!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Sylvia
September 2, 2019
What size is this dispenser?
Hello Sylvia, Thank you for the question. Going by the 1 inch grid on the site, this dispenser is about 6.5"X6.5". Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Marc
March 17, 2020
Fabric softener dispenser for Whirlpool itw4871fw2
For model number whirlpool ITW4871FW2
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Agitator Cap - Part# PS11741199.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Marsha
July 30, 2021
The brand is Kenmore, seriel # cl2841105. There is no fabric softener dispenser so i want to make sure this part will fit this Kenmore washer.
For model number 110.22702100
Hello Marsha, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11743341. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Connie
April 6, 2022
Will the dispenser fit on the removable agitator?
Hello Connie, thank you for contacting us. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
Dev
January 9, 2020
Is this part compatible with Inglis washer model ITW4600YQ1?
For model number ITW4600YQ1
Hello Dev, Thank you for the question. Very sorry but as per Inglis, this model does not have the Fabric Softener Dispenser option. We hope this helps!
Was this helpful?
Thank you for voting!
Ronald
February 15, 2020
I need a fabric softener dispenser cup that will fit my model (listed above). Thank you
For model number 110.26442501
Hello and thank you for writing.
Softener dispenser # PS11743341. We hope this helps. Please contact us anytime if you require further assistance.
Was this helpful?
Thank you for voting!
France
February 24, 2024
I want by the piece for my laundry for dispenser softener
Can you help me ?
Thank you
For model number ITW4871FW3
Hello France, thank you for your inquiry. The fabric softener dispenser you are looking for is part number PS1488027. We hope that helps!
Was this helpful?
Thank you for voting!
Related Parts:
Alan
February 20, 2022
My dispenser came apart when I took it off to clean. Which way dose the center go back?
For model number 110.20922991
Hello Alan, Thank you for the question. We suggest watching the How to Video for the Dispenser. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743341
Manufacturer Part Number: WP63594
Manufacturer Part Number: WP63594
Brand
Model Number
Description