Part Location Diagram of WP63594 Whirlpool Fabric Softener Dispenser
See part 1 in the diagram
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Fabric Softener Dispenser

★★★★★
★★★★★
22 Reviews
$14.89
  In Stock
PartSelect Number PS11743341
Manufacturer Part Number WP63594
Manufactured by Whirlpool
Product Description

Fabric Softener Dispenser Specifications

This parts fits on top of the agitator.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Does not dispense fabric softener or detergent | Will not drain
This part works with the following products:
Washer.
This part works with the following products:
Kenmore, Whirlpool, Kenmore, Inglis.
Part# WP63594 replaces these:
AP6010164, 21032, 63594, 8226
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
22 Reviews
5.0
Filter By Rating:
  • 5 Stars
    22
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 5.0 / 5.0, 13 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Top part of agitator was not locking in and turning
Remove top "cap" on agitator to expose the bolt that holds the agitator to the drum shaft. Undo the bolt and pull out the agitator. Disassemble, toss the old parts and install the new parts in reverse order. Repair took less than 5 minutes and we can now do full loads of laundry again!
Other Parts Used:
Agitator Repair Kit Thrust Spacer
  • Glenn from Merrick, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
47 of 55 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
just needed a new softener dispenser
ordered part on wednesday. it shipped to me thursday. pop the old one off, popped the new one on. slick and easy !!!
thanks
Other Parts Used:
  • scott from brooklyn, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
aggitator stripped, not turning
removed the cap and unscrewed locking fitting. Removed aggitator dogs and replaced with new and reassembled.
Other Parts Used:
Agitator Cam Kit
  • Hugh from Auburn, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
I had a broken fabaric softener dispenser
The dispenser ring was loose due to the broken plastic dispenser. Replacement was too easy.
Removed the old, and snapped the new one in place. Took all of 1 minute. Now I'm back up and running
Other Parts Used:
  • Brian from Bridgewater, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
7 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Despenser fell into drum an cracked,ther after it would not stay on the agitator
Actually I had been out shopping , came home, and my husband suprised me by having it done.

The ease and quickness that we esperienced in ordering and recieving the part was quite remarkable.

We use all Sears appliances and they are all about 15 yrs old and still in very good service,

Other than the despenser... we had no other
operational problems.

It was the personal online help that was the most surprising.. what a great thought. They found my part and part # so quickly.
Other Parts Used:
  • Peggy from rockford, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Missing Fabric Solfener Dispenser & Chipped paint
Popped dispenser in place & touched up chipped areas
Other Parts Used:
Touch-Up Paint - White
  • Patrick from SACRAMENTO, CA
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
4 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The fabric softener dispenser quit working.
I ordered the dispenser and it arrived within 24 hours. Amazing. It simply snaps onto the top of the agitator. Push the blue lock ring down to lock it in place and you are done. It works perfectly.1
Other Parts Used:
  • Stephen from Columbus, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fabric softener dispenser broke.
Placed the new dispenser in since the broken one had popped off.
Other Parts Used:
  • C. E. from REEDLEY, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
replacing a fabric softener dispenser
A snap! I slipped the dispenser on the agitator, pressed the aqua ring down and it was installed.
Other Parts Used:
  • Glynnette from Hyde Park, MA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitaor not functioning everything good.
Used a hand truck to lay washer on its side removed motor assembly and hoses,unplugged all wiring harness assembly. Using small hammer positioned new couplings on transmission and motor flush to end of shaft. Applied new insert on transmission coupling and positioned motor applied mount straps and screws. Reconnect wiring harness assemblies set upright and dry run cycle. Everything good washed 3 loads very happy no laundry mat visit.
Other Parts Used:
Direct Drive Motor Coupling
  • Michael from Kingman, AZ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

9 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mayra
November 9, 2017
Hello. I need to know where to put the fabric softener in the washing machine
For model number 11029852991
PartSelect logo
Hi Mayra, Thank you for the question. The fabric softener goes into the fabric softener dispenser at the top of the agitator. If you do not currently have the dispenser you can order PartSelect Number PS11743341 and use it on your agitator. Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Sylvia
September 2, 2019
What size is this dispenser?
PartSelect logo
Hello Sylvia, Thank you for the question. Going by the 1 inch grid on the site, this dispenser is about 6.5"X6.5". Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Marc
March 17, 2020
Fabric softener dispenser for Whirlpool itw4871fw2
For model number whirlpool ITW4871FW2
PartSelect logo
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Agitator Cap - Part# PS11741199.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Marsha
July 30, 2021
The brand is Kenmore, seriel # cl2841105. There is no fabric softener dispenser so i want to make sure this part will fit this Kenmore washer.
For model number 110.22702100
PartSelect logo
Hello Marsha, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11743341. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Connie
April 6, 2022
Will the dispenser fit on the removable agitator?
PartSelect logo
Hello Connie, thank you for contacting us. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!

Was this helpful?
Thank you for voting!
Dev
January 9, 2020
Is this part compatible with Inglis washer model ITW4600YQ1?
For model number ITW4600YQ1
PartSelect logo
Hello Dev, Thank you for the question. Very sorry but as per Inglis, this model does not have the Fabric Softener Dispenser option. We hope this helps!

Was this helpful?
Thank you for voting!
Ronald
February 15, 2020
I need a fabric softener dispenser cup that will fit my model (listed above). Thank you
For model number 110.26442501
PartSelect logo
Hello and thank you for writing. Softener dispenser # PS11743341. We hope this helps. Please contact us anytime if you require further assistance.

Was this helpful?
Thank you for voting!
France
February 24, 2024
I want by the piece for my laundry for dispenser softener Can you help me ? Thank you
For model number ITW4871FW3
PartSelect logo
Hello France, thank you for your inquiry. The fabric softener dispenser you are looking for is part number PS1488027. We hope that helps!

Was this helpful?
Thank you for voting!
Related Parts:
Alan
February 20, 2022
My dispenser came apart when I took it off to clean. Which way dose the center go back?
For model number 110.20922991
PartSelect logo
Hello Alan, Thank you for the question. We suggest watching the How to Video for the Dispenser. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
  • 1
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743341
Manufacturer Part Number: WP63594
Brand
Model Number
Description
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012852100
Washer
Kenmore
11016602690
Washer
Kenmore
11016602691
Washer
Kenmore
11016602692
Washer
Kenmore
11016602693
Washer
Kenmore
11016611690
Washer
Kenmore
11016611691
Washer
Kenmore
11016611692
Washer
Kenmore
11016612690
Washer
Kenmore
11016612691
Washer
Kenmore
11016612692
Washer
Kenmore
11016872690
Washer
Kenmore
11016872691
Washer
Kenmore
11016872692
Washer
Kenmore
11016872693
Washer
Kenmore
11018609890
Washer
Kenmore
11018702790
Washer
Kenmore
11018702791
Washer
Kenmore
11020622990
Washer
Kenmore
11020622991
Washer
Kenmore
11020632990
Washer
Kenmore
11020632991
Washer
Kenmore
11020642990
Washer
Kenmore
11020642991
Washer
Kenmore
11020692000
Washer
Kenmore
11020692001
Washer
Kenmore
11020702990
Washer
Kenmore
11020702991
Washer
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service