Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
March 23, 2018
Washer does not agitate in lower speed. It works fine on high speed but does not agitate when its suppose to go into lower speed. It drains correctly and rinses correctly, it just don't go into lower agitation speed. Is there a switch that changes motor from high speed to lower speed? Thank you
For model number KAWE900SWH1
Hi John,
Thank you for your question. Other than your control board that controls the whole machine, it would only be your capacitor and the motor itself. I doubt it is the capacitor because all that part is is a way to help start your motor. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
John
March 26, 2018
You sent me a answer to a question that I asked and the answer was that I needed a part #ps11743295 and my new question is could you please tell me where this part is located on my washer? Thank you
For model number KAWE900TWH1
Hi John, Thank you for the question. The part starts at the base of the appliance inside the cabinet connecting to the motor and goes up the side to the top to the control panel. If you click on the diagram, it is listed as 1E. Hope this helps!
Was this helpful?
Thank you for voting!
Taylor
June 24, 2019
Does this part come with wire leads already inserted in the harness?
Hello Taylor, Thank you for the question. This is just the plastic block connectors. Hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
