Part Location Diagram of WP596669 Whirlpool Hose Clamp
See part 6 in the diagram
Replacing your Kenmore Washer Hose Clamp
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Hose Clamp

$10.25
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11743008
Manufacturer Part Number WP596669
Manufactured by Whirlpool
Product Description

Hose Clamp Specifications

This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Kenmore Washer Hose Clamp

Replacing your Kenmore Washer Hose Clamp
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer, Dishwasher, Refrigerator, Washer Dryer Combo.
This part works with the following products:
Kenmore, Whirlpool, Maytag, KitchenAid.
Part# WP596669 replaces these:
AP6009835, 01-37-687, 113200024, 113200152, 113200392, 14206537, 16314, 2-11639, 2-14739, 2-1575, 2-16169, 2-2515, 2-985, 200985, 201575, 202515, 21002253, 211639, 214739, 216169 ... Show more , 22002509, 22003018, 22003072, 22003073, 22003905, 2200954, 22294, 23001257, 23001506, 25-6049, 25-7796, 25-7867, 251830, 25988, 272794, 272796, 272844, 272845, 272846, 272847, 274337, 27643, 287859, 288446, 301958, 34001161, 34001207, 34001208, 34001224, 34941, 353366, 353367, 356436, 357821, 36801, 370450, 370451, 370452, 371501, 371503, 371505, 371506, 388000, 39282, 3955674, 4-0059, 4-0168, 4-0179, 4-10296, 4-10377, 4-179, 400059, 400168, 400179, 40054901, 410296, 410377, 4171914, 478572, 487728, 488157, 489257, 563972, 568692, 569097, 596110, 596471, 596508, 596669, 6-911856, 6-919982, 6-920322, 601105, 616148, 644261, 648470, 660632, 660635, 67001408, 7-57247, 710082, 715453, 757247, 797369, 798017, 8055019, 8181537, 8181538, 8194172, 8318451, 8318490, 8318491, 8318492, 8318493, 8318494, 8318495, 8526324, 8526325, 8533946, 8541009, 866812, 866823, 9-0433, 9-0440, 9-11856, 900433, 900440, 911856, 9602-3, 965242, 965321, 9724996, 9724997, 98292, 983190, 98334, 98465, 98659, 99003634, 99003635, DC61-00219C, DC65-00008A, P113200024, P113200152, P113200392, R0601506, R0601540, R9800234, W10096851, W10096852, W10116736, W10117298, W10117299, W10156124, W10286346, W10286357, Y22003072, Y2200954, Y22294, Y757247 Show less
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 17 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Washing Machine was leaking water
Loosened the hose clamp, removed the injector valve and injector nozzle assembly, replaced both and tightened with new hose clamp. Fixed the problem for less than $20!! Washing machine is 20 years old and this was the first problem--hopefully it is now good for another 20 years!
Other Parts Used:
Rubber Injector Valve Plastic Injector Nozzle
  • jeff from lindenhurst, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
60 of 79 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Cold water flow was slow
Removed old part; exchanged rubber plungers between the hot and cold. Symptoms still the same - so eliminated the need for new rubber plungers (even though they still needed to be replaced). The only item left were the magnetic switches opening and closing the flows. The syphon was replaced due to broken plastic mountings causing the syphon to hang into the drum. Repair was a snap and finding the parts on your site was very easy and parts were there within 2 days at standard shipping. Thank you.
Other Parts Used:
Water Inlet Syphon Water Inlet Valve with Mounting Bracket
  • Garry from Palm Bay, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers, Socket set
22 of 36 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer leaked from top, left corner of machine.
Removed front of machine; then tilted back the top of machine, after removing the two screws in top front. Removed the old parts, trimmed the injector hose which was slightly longer than necessary, put new injector nozzle in ruber injector valve and inserted into the new sleeve, clamping the new hose to sleeve as well as clamping the remaining functioning hose to sleeve. The new sleeve mounting bracket was slightly different from the old one, but I was able to make it work with a small block of wood and two screws. The washing macine no longer leaks, the parts arrived timely, and the price was right. Thanks.
Other Parts Used:
Rubber Injector Valve Injector Sleeve Plastic Injector Nozzle Injector Hose
  • Robert from Hudson, WI
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
21 of 26 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer not rotating
Washer not rotating, removed the control head and back cover. Then removed body housing around tube to get to the bottom. had to replace coupling on motor then removed the agitator tower and replaced the Parts for the tower agitator. unit is 16 years young and still looks and runs new, put a total of 55 dollars into repair and it should be good for a long time. This is with a family of five. Washing 2 loads everyday.
Other Parts Used:
Foot, Front - Single Direct Drive Motor Coupling Water Inlet Syphon Agitator Repair Kit
  • kaine from butler, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench set
21 of 174 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator Not Woking
Unplugged power cord then disconnected the water supply and drain hose. Removed 2 screws and took the front panel off. Laid washer on it's side and posistioned the transmission with the cover facing upward. Removed the hex head screws then used a razor knife and a putty knife to remove the silicone sealant. Found that the agitator shaft spring had broken and fallen into the housing jamming the gears that's used in agitation. Removed the oil and all broken pieces of the spring. Installed new shaft spring, replaced the oil then applied sealant to the cover and screwed the cover back down. Let the washer stay in the same posistion for about 18 hours to let sealant dry completely. Then I sat the washer back on it's feet and removed 2 screws that holds the top lid in place. This allowed me access to the tub cover where the injector t is located. Installed the injector t along with the injector tube seal. Connected the hose and hose clamp. Then I put the lid back down and secured with the screws. Connected the water supply and drain hose then the power and selected a wash time and observed the operation. Everything worked ok so I put the front cover back on. Note: I had used the injector t from this washer to fix another washer that an appliance dealer had given me to use for parts to repair the one just described above. That was the only thing that was wrong with it. It was used for about a year and a half and it developed a problem in the spin cycle. Appears to be a brake problem. I intend to repair it as well.
Other Parts Used:
Injector Tube Agitator Shaft Spring Injector Tube Seal
  • Richard from Alexander City, AL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
20 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water wouldn't stop
Unplugged washer then took back off control panel. Removed clamp and tube from pressure switch. Pushed in tabs with a screwdriver and lifted top. Removed clamp and broken tube. Put new tube in place and tighten clamp with nutdriver. Closed top and put other end of tube on pressure switch with clamp. Put back on control panel and plugged in. Clamps are to big for application but do work. So far so good!
Other Parts Used:
Pressure Switch Hose
  • Steven from Westfield, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers
17 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Weeping water control valve
Turned off water and power to the unit. Removed kick plate from under the dishwasher to access the water contol valve. Placed an absorbant rag under the water valve and water line. Disconnected solenoid on water control valve from electrical connection with my fingers. Used a standard adjustable wrench to disconnect the water line from the water control valve. Then used a 1/4" nut driver to loosen the two bolts that hold the water control valve on to the mounting bracket. Pulled the water control valve slightly forward to disconnect the water feed line to the dishwasher. Used a blunt end plier to pinch the clamp open and slowly wiggle the feed line off of the water control valve. Then removed 90 degree elbow off of the water control valve and used pipe dope and connected the elbow onto the new water control valve. Replaced water control valve in reverse order and utilized new hose clamp to reconnect feed line to new water control valve. Saved door seal for future use, when seal goes bad.
Other Parts Used:
Water Valve
  • Robert from Woodstock, IL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
17 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
improper or no hot water flow
After taking the entire washer apart one time, we learned that we could take the top and front of the machine off only to repair it. I found Part-select online and with the model number locating the part was easy. It arrived within 3 days and with instructions I could easily replace the old part with a few tools. I spent dollars instead of hundreds for a new machine.
Other Parts Used:
Water Inlet Valve with Mounting Bracket
  • Cynthia from Manchester, MO
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Wrench (Adjustable)
16 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
leaking water under back left of washer
The first thing I did was look at the diagrams for my specific appliance on the parts select web site to locate fastners. I removed the front panel(2 screws 4" from floor on front panel), then removed the corner bolts of top panel(found under in front). Next I removed the 4 screws on the control panel (on top). I located the screw holdling the fill injector to the top Lid. Then I removed the clamp holding the unit to the regulator. Assembled the unit and placed it in position. First attaching the fill injector to top panel, then clamping the hose to regulator, then replacing 4 screws in control panel. Next the two corner screws in corners under the top panel. Replaced front panel and 2 screws. Then had a trail run and no water leaks any where.
Other Parts Used:
Injector Hose Upper Fill Injector Lower Fill Injector Clamp
  • Gregory from Louisville, KY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
15 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Leaking water rear left side
This happened once before and had I remembered how to get the front door off and lift the top it would have taken me less time. I actually spent more time assessing prior to ordering parts than in repairing once the parts came.

One odd thing - it only leaked when the hot water was entering (if the settings were on cold only no leak - no idea why that should be).

Anyway, this injector and the rubber housing it slides into get old and clogged or deteriorate. I ordered all the parts and replace them - but probably only needed to replace the plastic injector nozzel and the rubber sleeve it fits into.

All good now - no more leaks (until the next time!)
Other Parts Used:
Injector Fill Hose Rubber Injector Valve Injector Sleeve Plastic Injector Nozzle
  • Forrest from San Diego, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
8 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cathie
February 19, 2020
Dishwasher has runs water in floor soon as I hook it up. And with the door open looking inside on the left side there's a hole where the water runs into the washer, well this don't stop running when the door is open. I had noticed water was all over the floor after about 10 minutes of being turned on, that's when i had noticed that with the door open it did not shut water off as before .. help
For model number MDC4809AWB0
PartSelect logo
Hello Cathie, Thank you for the question. We suggest testing the Water Valve. The valve can be tested with a multi meter and should be reading between 500 - 1500 ohms of resistance. You can also test the Float Switch to see if it is closed. We hope this helps.

3 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Marcelo
April 8, 2022
New machine doesn’t turno water on and not working
For model number Wfw5620hw3
PartSelect logo
Hello Marcelo, Thank you for your inquiry. We have researched the model you have provided and we would recommend checking the following parts to fix your issue: the door latch, the single water inlet valve, the dual water inlet valve, and the water level pressure switch. You can test the parts with a multimeter. If you are unfamiliar with how a multimeter functions, we have videos available to assist you. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
William
September 17, 2019
How does a clamp fix dishwasher filling with water after cycle is finished
For model number 66516462300
PartSelect logo
Hello William, thank you for your question. The Hose Clamp could be bent in such a way that it is preventing the water from travelling through the hose. I hope this helps!

Was this helpful?
Thank you for voting!
Frank
January 25, 2023
My front loading Amana door seal was replaced in November 2022, it still leaks.
For model number NFW7200 W
PartSelect logo
Hello Frank, thank you for contacting us. The issue is most probably related to a damaged wire diaphragm, part number PS11741554. It holds the door boot in place and helps in preventing leaks. If that is not the case, please check the hose clamp, part number PS11740613, and the door boot seal, part number PS11741579, for damage. Please reach out to customer service if you need help placing an order. Glad to be of help!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11743008
Manufacturer Part Number: WP596669
Brand
Model Number
Description
Kenmore
101906620
Range - Kenmore Range/Stove/Oven Model 101.906620 (101906620, 101 906620) Parts
Kenmore
106625480
Freezer
Kenmore
106625481
Freezer
Kenmore
106625482
Freezer
Kenmore
106625490
Freezer
Kenmore
106625491
Freezer
Kenmore
106626480
Freezer
Kenmore
106626490
Freezer
Kenmore
106627481
Freezer
Kenmore
106627483
Freezer
Kenmore
106627484
Freezer
Kenmore
106627491
Freezer
Kenmore
106627493
Freezer
Kenmore
106627494
Freezer
Kenmore
106628480
Freezer
Kenmore
106628481
Freezer
Kenmore
106628490
Freezer
Kenmore
106628491
Freezer
Kenmore
106628530
Freezer
Kenmore
106628531
Freezer
Kenmore
106629480
Freezer
Kenmore
106629490
Freezer
Kenmore
106629590
Freezer
Kenmore
106635170
Dehumidifier
Kenmore
106635171
Dehumidifier
Kenmore
106638170
Dehumidifier
Kenmore
106638200
Dehumidifier
Kenmore
106639200
Dehumidifier
Kenmore
106639201
Dehumidifier
Kenmore
106639202
Dehumidifier
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service