Electronic Control with Touchpad - Black Specifications
As per the manufacturer, this part does not have the P13 connector.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range.
This part works with the following products:
Jenn-Air.
Part# WP5760M301-60 replaces these:
AP6009795, 5760M301-60, 74006127, 74008206
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
December 20, 2018
I've a jen air oven above model number and after it's on for 10 minutes it starts buzzing and displays f1 on the scree. Model no. Jds9860aap serial no. 20503313et. What's your recommendation, should i replace the control panel and if so how much is that and is it still available to purchase.
For model number JDS9860AAP
Hi Joe, thank you for your question. That error code does mean that a button has failed on your touchpad. This part you have questioned on does not go underneath your model. I have linked the correct part down below for you, that matches your model and series number. I hope that helps. Good luck with your repair.
My oven and screen shuts off, I bang the top and it would come back on, now it won't. No error code appears. Do I need a new control panel?
For model number JDS9860AAP
Hello Vicki, Thank you for the question. This sounds like a loose wire or harness. I suggest starting there first. If the wiring is good and secure you may have a defective board. Thank you for your inquiry, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Jaime
February 10, 2024
Hi Parts Select tech support team, I have a JennAir gas range. The unit is turning the oven on on its own, followed by subsequent beeps. After I press several times the Stop/Clean button on the panel, it signals an F1 code error.
What part must be replaced? Thanks
For model number JDS9860AAP
Hello Jaime, thank you for your inquiry. This error code indicates that there is a problem with the control board or with the touch-pad. You may need to clean the touch-pad area. If it does not resolve the issue, then you may need to replace the control board. For us to locate the correct control board and repair information, we will require the series number of your model. Once you have located the series number, please feel free to resubmit the question and we will be happy to help you. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Catherine
October 4, 2019
Oven quit error, code f3. Replaced thermal sensor, baked twice now f3 is back.
For model number JDS9860AAP
Hello Catherine, Thank you for the question. The Error code F3 indicates that your oven thinks the oven sensor is shorted out or is way too hot. This can be caused by either a bad oven sensor or a defective Electronic Control. The Sensor did not fix the issue I suggest replacing the Electronic Control with Touchpad. Hope this helps!
Was this helpful?
Thank you for voting!
Charles
March 10, 2022
Where do I find the error codes on this range?
For model number JDS9860AAP
Hi Charles,
Thank you for your question. You may view the error codes for a Jenn-Air range on our website. We have included a link that you may use to view them. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Hi Parts Select tech support team, this is a follow up to my earlier question about the correct control board and repair information for my JennAir gas range. The unit's serial number is 21787986GA.
Thank you
For model number JDS9860AAP
Hi Jaime, thank you for your inquiry. We have found that your model comes with 2 series. The control board for series 10 is part number PS11742968, and the board for series 17 is part number PS11742969. We hope this solves your problem!
