Part Location Diagram of WP53-0918 Whirlpool Lint Filter
See part 9 in the diagram
Replacing your Norge Dryer Lint Filter
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Lint Filter

★★★★★
★★★★★
7 Reviews
$74.77
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11742807
Manufacturer Part Number WP53-0918
Manufactured by Whirlpool
Product Description

Lint Filter Specifications

This lint filter screen has two side guides on either either of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Norge Dryer Lint Filter

Replacing your Norge Dryer Lint Filter
Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer.
This part works with the following products:
Norge, Magic Chef, Maytag, Crosley.
Part# WP53-0918 replaces these:
AP6009639, 53-0918, WP53-0918VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
7 Reviews
4.9
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 4.7 / 5.0, 39 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
lint filter broke
I pulled out the broken lint filter and put the new one back in, real easy. I am so happy with the prompt delivery I got from PartsSelect.com. I ordered on a Monday and and it was delivered on a Wednesday
Other Parts Used:
  • Jane from Grand Forks, ND
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
481 of 493 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat
Lift the top. Remove (2) screws holding the front of the dryer in place. Lift the front off the 2 retaining clips on the bottom of the dryer. The hardest part of the install was removing and replacing the igniter. A couple of helping hands from the girlfriend to hold the parts in place while I replaced the two screws was very helpfull. Installing the multi rib belt was also very easy with the help of a second pair of arms to reach under the drum to thread the belt onto the tensioner. The lint filter, of coarse was just a matter of throwing the old cracked one away and replacing w/ the new.
Other Parts Used:
Igniter with Wire Harness Multi Rib Belt - 92-1/4"
  • Stan from Riverside, CA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
388 of 404 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken lint filter
First went and got a beer.
Looked at the dryer.
Drank my beer.
Went and got one more, due to long job.
Looked at dryer again.
Opened the door.
Had to get one more beer.
Removed filter.
Got one more cold one.
Put new filter in.
Got one more beer.
Closed door.
Finished!
Other Parts Used:
  • BRUCE from SAN MARCOS, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
145 of 219 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
agitator wouldn't turn
Not sure, my husband did the repair but said it wa real easy and if he can do it anyone can, lol
Other Parts Used:
Agitator Auger and Post Assembly
  • PATRICIA from NEW CARLISLE, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
96 of 181 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door seal partially torn off. Lint filter worn with holes.
Parts Select made it extremely easy to order parts from their site. Parts came in a timely manner and very reasonable priced. Thanks to Parts Select! Door Seal just needed to be removed and replaced by pushing into little slot openings.
Other Parts Used:
Door Seal
  • Andrea from Santee, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
83 of 148 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Brooken lint filter and door seal
It was easy - I had my 12yr old daughter do it. The old door seal was completely removed, then you placed the new seal in the apropriate knoches that are on the door of the dryer. The lint filter just had to be placed in the vent. - Done.
Other Parts Used:
Door Seal
  • Tonja from Green Bay, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
70 of 134 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint Filter Broke
I slid in the new one
Other Parts Used:
  • Timothy from Cheektowaga, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
70 of 71 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
It wouldn't start
First I removed the two screws that hold the element in place. I then pulled the element completely out and disconnected the two wires.

From there it was just a matter of installing the new part.

Anybody could do it
Other Parts Used:
Thermal Fuse
  • Amaury from Wake Forest, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
68 of 131 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Parts replacement
Changing the parts was easy.
Other Parts Used:
Bleach Dispenser - White
  • Juan from Frisco, TX
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
41 of 1286 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dry was heating intermittently at first and then stopped heating.
I first confirmed that the ingitor was working (because I could see it glow with the lights off at the bottom of dryer). I read within Parts Select that intermittent heating was likely the coils and that I could test their resistance to confirm that this was the problem. I removed the coils (very easy) and thenI checked their resistance with a tester. The resistance on one of them was reading 600 ohms instead of the required 1300 ohms. So I replaced them both and presto it works fine. I also took the opportunity to thoroughly clean out the lint (accessible with the front panel removed) and I replaced the lint filter which was ripped and the gasket around the door which was missing a piece. All very easy to do and parts select made it a cinch. For safety I made sure that the gas and electric were off before I did any of this work. oh, I also levelled the foot which made my wife happy.
Other Parts Used:
Door Seal M Series New Style Coil Kit
  • Donald from Blauvelt, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
19 of 294 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Scott
November 9, 2017
I need a lint filter and the plastic piece it slides into. Thanks
For model number Admiral max capacity
PartSelect logo
Hi Scott, Thank you for your inquiry. Before we can assist you further we would need the model number from your appliance. Thank you and have a great day!

6 people found this helpful.

Was this helpful?
Thank you for voting!
Howard
May 7, 2018
How do I clean the complete dryer filter not just the filter it self ?
For model number Pyet344ayw
PartSelect logo
Hi Howard, Thank you for the question. To clean the lint duct you will need to remove the front panel of the dryer and vacuum out the duct. Hope this helps!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Janet
December 27, 2022
My lint filter doesn't fit down into the opening all the way and I have had clothes catch on the corner of the filter and either tear the cloth or twist it, like washcloths, etc. Not sure if it has warped over the years? I just bought this house with this dryer in it. Works fine except for this.
For model number CDG7000W
PartSelect logo
Hi Janet, thank you for your inquiry. If your lint trap will not slide into its slot properly anymore, there are three reasons why. The lint trap is warped, your filter is dirty, and something is stuck inside the filter slot. To give the area a check, unplug the dryer and remove the lint trap. Shine a flashlight down in the hole to see if you can see an obstruction or if it needs to be cleaned; if it is warped, you need to replace it with part number PS11742807 to fix this issue. Please reach out to customer service if you need help placing an order. Glad to be of help!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
;
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742807
Manufacturer Part Number: WP53-0918
Brand
Model Number
Description
Norge
7002A
Dryer - DRYER
Norge
7215A
Dryer - ELECTRIC DRYER
Norge
7215A REV A
Dryer - Norge Dryer Model 7215A REV A (7215AREVA) Parts
Norge
7215A REV B
Dryer - Norge Dryer Model 7215A REV B (7215AREVB) Parts
Norge
7215A REV C
Dryer - Norge Dryer Model 7215A REV C (7215AREVC) Parts
Norge
7215A REV D
Dryer - Norge Dryer Model 7215A REV D (7215AREVD) Parts
Norge
7215A REV E
Dryer - Norge Dryer Model 7215A REV E (7215AREVE) Parts
Norge
7215A REV F
Dryer - Norge Dryer Model 7215A REV F (7215AREVF) Parts
Norge
7215A REV G
Dryer - Norge Dryer Model 7215A REV G (7215AREVG) Parts
Norge
7216A
Dryer - ELECTRIC DRYER
Norge
7216A REV A
Dryer - Norge Dryer Model 7216A REV A (7216AREVA) Parts
Norge
7216A REV B
Dryer - Norge Dryer Model 7216A REV B (7216AREVB) Parts
Norge
7216A REV D
Dryer - Norge Dryer Model 7216A REV D (7216AREVD) Parts
Norge
7216A REV E
Dryer - Norge Dryer Model 7216A REV E (7216AREVE) Parts
Norge
7216A REV F
Dryer - Norge Dryer Model 7216A REV F (7216AREVF) Parts
Norge
7368A
Dryer - ELECTRIC DRYER
Norge
7375A
Dryer - ELECTRIC DRYER
Norge
7375A REV A
Dryer - Norge Dryer Model 7375A REV A (7375AREVA) Parts
Norge
7375A REV B
Dryer - Norge Dryer Model 7375A REV B (7375AREVB) Parts
Norge
7375A REV C
Dryer - Norge Dryer Model 7375A REV C (7375AREVC) Parts
Norge
7375A REV D
Dryer - Norge Dryer Model 7375A REV D (7375AREVD) Parts
Norge
7375A REV E
Dryer - Norge Dryer Model 7375A REV E (7375AREVE) Parts
Norge
7375A REV F
Dryer - Norge Dryer Model 7375A REV F (7375AREVF) Parts
Norge
7430A
Dryer - ELECTRIC DRYER
Norge
7430A REV A
Dryer - Norge Dryer Model 7430A REV A (7430AREVA) Parts
Norge
7430A REV B
Dryer - Norge Dryer Model 7430A REV B (7430AREVB) Parts
Norge
7430A REV C
Dryer - Norge Dryer Model 7430A REV C (7430AREVC) Parts
Norge
7430A REV D
Dryer - Norge Dryer Model 7430A REV D (7430AREVD) Parts
Norge
7433A
Dryer - ELECTRIC DRYER
Norge
7433A REV A
Dryer - Norge Dryer Model 7433A REV A (7433AREVA) Parts
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service