Maytag/Maytag_Thumb/58910.gif
See part 2 in the diagram
Replacing your Amana Dryer Single Drum Glide Felt Pad play video
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Single Drum Glide Felt Pad

★★★★★
★★★★★
1 Review
$8.81   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your NDE7800AZW!
 Fits your NDE7800AZW!
PartSelect Number PS11742773
Manufacturer Part Number WP500121
Manufactured by Whirlpool
Product Description

Single Drum Glide Felt Pad Specifications

This dryer drum glide pad is an inch long. It is made of a felt material and is used for gas and electric clothes dryers.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Noisy | Will not tumble | Marks left on clothes
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Amana, Speed Queen, Maytag, Crosley.
Part# WP500121 replaces these:
AP6009605, 500121, 56058, R0604507
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

2 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tammy
September 12, 2017
If the felt pads are missing from the drum glides, will this cause the drum to rub and scrape?
For model number MDET446AYW
Hi Tammy, Thank you for your order. Yes, if you are missing these parts it can cause scrapping inside of your appliance. Good luck with your repair.

5 people found this helpful.

Was this helpful?
Thank you for voting!
Rose
August 15, 2022
I replaced the belt, drum rollers & drum glides. The drum glides are shredding and the dryer is still very noisy. At start up, it seems like it’s having problems going and then when turning, it seems like something is rubbing. I am ordering the drum felt but it appears both back & front felt is the same. I also need the adhesive to glue for the felt. Do you sell this as well?
For model number MDET446AYW
Hello Rose, Thank you for the question. The Front and Rear Felt Seal is Part #: PS11741917. They would be the same for front and rear and sold individually. The High Temperature Adhesive is PartSelect Number PS11757492. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
play video

Was this helpful?
Thank you for voting!
Related Parts:
Part Videos

Replacing your Amana Dryer Single Drum Glide Felt Pad

Replacing your Amana Dryer Single Drum Glide Felt Pad play video
Customer Repair Stories
 Average Repair Rating: 3.4 / 5.0, 17 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Squeeling and grinding noise
Wasn't the belt!! Changed it anyway. Should have come here earlier. That mistake added several days to the repair waiting for a second batch of the right parts. Became a pro at taking the dryer apart and reassembling, though! Easy job, just take your time and mark your wires, if you need to.
Followed other people's excellent instructions. Clean out all the dust bunnies. Schematics were a great resource. Those and the prices made me a repeat customer.
The shaft of the Idler Lever wheel was the cause, but decided, since I had it apart, to spend a little more money and replace both Drum Support Rollers and the Roller Bracket and Shaft Assembly. They showed some wear, and the parts were very inexpensive. Make sure you have snap ring pliers with prongs that are smaller than the standard 0.40 to save some aggravation with the Drum Rollers. $5 tool. Total parts were less than $60. Probably saved $150+ in labor. Quieter than ever now. Thanks!
Other Parts Used:
Drum Support Roller and Shaft Assembly Dryer Idler Assembly Drum Support Roller
  • Steven from Holderness, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set
478 of 492 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Loud banging sound. Worn out roller.
Pulled off the lower panel with 5/16 socket.Pulled off the door assembly by removing the two screws at the bottom of the door assembly. I pulled down a little and then out. be carefull of the wires. Other posts said to remove. The wires were long enough I did not have to remove them. I just leaned it against the wall. I then removed the 4 screws that hold the front piece in.pulled it off replaced brackets , installed self adhesive felt(stuck good) and then glides. Mine were thin but not the problem. I then reached under the drum and released the belt from the tensioner. I then pulled the whole drum out.This is the time to vacum out good. I could get to the rear rollers very easy. The left roller was shot and the shaft half wore into(the problem). I pulled off the two screws holding the roller support. Normally You have to remove the wheel with snap ring pliers first to remove the support. In this case snap ring long gone. Replaced support shaft, installed thrust washers and roller with grease for both sides. The right support shaft was still good. Removed tensioner pulley and inspected. It was just as good as the new one. Cleaned and greased and reinstalled. Put new belt on the tub and slid it back in. Be carefull to get the belt on the proper side of the tensioner. I then installed the front supprt in place to support the tub with the 4 screws. Spun the tub(felt good) then reached under and reinstalled belt to motor and tensioner. Spun again to check for belt alignment. (Check) Reinstalled door an lower panel. Test Quiet Sounds like new. Very easy! I hope this helps someone just as the other post has helped me. Blessings to all.
Other Parts Used:
Idler Pulley Wheel with Bearing Drum Support Roller and Shaft Assembly Multi Rib Belt Drum Glide Drum Support Roller Retaining Ring Glide Bracket Kit Thrust Washer
  • David from Underwood, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
160 of 231 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Idler Pully Squelling
Squeling from inside dryer. To Fix-
Pry dryer top cover off by popping cover off the two fastening clips located at about 3" inward from the two front corners. A screw driver at these two locations is easily inserted between the top cover and front panel.
Next remove the two screws on the top inside of the driver approximate size 5/16 inch. Pull the top of the front panel outward and then note how the lower portion clips into the fram, lift the front panel off the clips and roll it to the right. Remove the 4 screws and bulkhead.
Draw a picture of how the belt wraps around the drum and idler. Also note the belt orienation on the drum. Roll the belt off the idler pully and reomve the drum.
Replaced Idler asembly by first removing the tension spring and lastly the retaining bolt.
Reinstall everything in reverse order. Can be a bit tough getting the belt around the idler and motor pulley however this is managable. My machine runs great now!
Once again Parts Select comes through with great delivery, perfect fit, good pricing, accurate parts list. This is my third purchase and I have been 100% pleased. By far the best on line service I have ever experienced.
Other Parts Used:
Drum Glide Dryer Idler Assembly Front Panel Seal Multi Rib Belt
  • John from Litchfield, NH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench set
21 of 33 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer got very noisy (grinding sound), and would tear up items that got hung between drum and front panel
I removed the lower front panel, which is held in place by two screws at the very bottom. I found pieces of the worn out brackets in the bottom of dryer. I then located damaged brackets bolted under front of drum at about 4&8 oclock. each bracket is held in place by two small bolts from the back side. The bolts for the new brackets go back in from the front, which eliminated the problem of stripped out holes. It is helpful if someone can reach indryer and hold up front of drum while you are starting bolts in brackets, I found that the kid standing closest worked great. The exploded view parts list was great for finding what I needed. My old dryer works great again and it is as quiet as a new one. This was $24.00 that was very well spent.
Other Parts Used:
Drum Glide Glide Bracket Kit
  • Dwight from Healdton, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer banging and clothes getting stuck between tub and felt pad while tumbling.
Very easy repair. I took off the bottom fromt panel with a nut driver. Then I took off the face/door panel. Take note of the wires that need to come off by marking them with a sharpie or tape. The top of the dryer can be stood up to allow access to the ductwork that has the felt pad on it. The felt pad was worn through in spots, the drum glide was completely gone and both cylinder glide brackets were almost completely worn through. I just replaced the brackets and the pads. The old felt came off fairly easily. I scraped the old glue for the felt off with a knife and cleaned and dried the surface before applying the hi temp adhesive. I waited 1 minute while the glue became tacky (be careful, the glue starts out thin and tends to run) and the felt pad was easily put back in place with my wife's help. Everything was very simple and it cost $87.00 for parts and shipping. I felt that this should be a good investment since I have had no other problems with this dryer and this is normal wear and tear. Better than paying $600+ for a new dryer. The video for changing the felt pad was very detailed and easy to follow as well.
Other Parts Used:
High Temperature Adhesive - 2oz. Drum Glide Cylinder Felt Seal Cylinder Glide Bracket
  • christopher from sycamore, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set
12 of 382 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heard the sound of loose change in the dryer
removed the front panel and the drum panel cover.replaced the guides and the felt pads and re-assembled.
Other Parts Used:
Drum Glide
  • Robert from Averill Park, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Screaching on start-up, then continuous after time
Idler was the noise source. Drum support rollers were failing also. I almost spent $500.00 on a new dryer, glad I replaced the parts instead. Sounds and works like new. Watch the video,its very helpful. Thanks Parts Select. You should advertise your services on TV or radio. I am glad I found you.
Other Parts Used:
Multi Rib Belt Dryer Idler Assembly Drum Support Roller
  • PAUL from GRESHAM, OR
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set, Wrench set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise and Heat will not stay on (Gas Dryer)
Parts that were recommended for the noise issue were spot on. Instructions were very helpful and made the job go very smooth. Replaced the belt, rollers don't forget to order (2) felt pad and idler pulley replaced.
The part suggestions for the heat problem did not fix the problem. The burner flame would come on for 2-5 min. then go off. A few min. later the burner would try to ignite but would not start. The igniter would get cherry red but no activation. I end up replacing the coil kit. Turned off the gas removed (2) screws and wala done 5 min. and it fixed the problem.
Other Parts Used:
Idler Pulley Wheel with Bearing Multi Rib Belt Drum Glide Drum Support Roller Thrust Washer
  • Rick from Marlborough, MA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
worn drum roller - squealing
Removed front panels and swiveled lid upwards. Loosened tensioner, removing belt and then carefully extracting the drum. Replaced 2 drum glides on underside of front panel. Next 2 rollers, which appear to unscrew, but do not do so. You must remove the retaining ring (surprise! ...and 2 screw drivers later). This was the longest and most frustrating part of the whole ordeal. Then just reverse the process for reassembly. This was my first electric dryer repair and it really wasn't too bad. Online docs I found were somewhat helpful, but really luck and perseverance. I did save probably $300 in replacement costs, which is quite satisfying. .
Other Parts Used:
Drum Support Roller and Shaft Assembly Drum Glide Drum Support Roller Retaining Ring Light Bulb - 7W Thrust Washer
  • Kurtis from Liberty Township, OH
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Idler pulley froze
Watched YouTube video
Other Parts Used:
Idler Pulley Wheel with Bearing Multi Rib Belt Drum Glide
  • Joseph from LAGRANGE, IN
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11742773
Manufacturer Part Number: WP500121
Brand
Model Number
Description
Kenmore
1106702901
Washer
Kenmore
1106702910
Washer
Admiral
ADE7005AKW
Dryer - Residential
Admiral
ADE7005AYW
Dryer - Residential
Admiral
ADE9005AGW
Dryer - Residential
Admiral
ADG7005AWW
Dryer - Residential
Speed Queen
AEM197
Dryer - Residential, Automatic
Speed Queen
AEM377
Dryer - Residential, Automatic
Speed Queen
AEM397
Dryer - Residential, Automatic
Speed Queen
AEM407L
Dryer - Residential, Automatic
Amana
AEM407L2
Dryer
Speed Queen
AEM407W
Dryer - Residential, Automatic
Amana
AEM407W2
Dryer
Amana
AEM427L2
Dryer
Speed Queen
AEM427W
Dryer - Residential, Automatic
Amana
AEM427W2
Dryer
Amana
AEM477L2
Dryer
Speed Queen
AEM477W
Dryer - Residential, Automatic
Amana
AEM477W2
Dryer
Speed Queen
AEM497L
Dryer - Residential, Automatic
Amana
AEM497L2
Dryer
Speed Queen
AEM497W
Dryer - Residential, Automatic
Amana
AEM497W2
Dryer
Speed Queen
AEM677L2
Dryer
Speed Queen
AEM677W
Dryer - Residential, Automatic
Speed Queen
AEM677W2
Dryer
Speed Queen
AEM697L
Dryer - Residential, Automatic
Speed Queen
AEM697L2
Dryer
Speed Queen
AEM697W
Dryer - Residential, Automatic
Speed Queen
AEM697W2
Dryer

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service