Maytag/Maytag_Thumb/S2YMYQL4.gif
See part 15 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Water Pressure Hose - Cut-to-Fit

★★★★★
★★★★★
2 Reviews
$71.51   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11741846
Manufacturer Part Number WP353244
Manufactured by Whirlpool
Product Description

Water Pressure Hose - Cut-to-Fit Specifications

This is the hose that tells your appliance if your tub is at the desired water level.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Will not stop filling with water
This part works with the following products:
Washer, Washer Dryer Combo, Dryer, Vacuum.
This part works with the following products:
Kenmore, Whirlpool, Maytag, KitchenAid.
Part# WP353244 replaces these:
AP6008706, 18623, 19156, 21046, 21503, 21640, 229683, 23046, 286091, 287664, 287861, 288321, 3347776, 3347777, 3347778, 3347779, 3347780, 3347781, 3349218, 3350391 ... Show more , 3363652, 3363655, 3363657, 3429857, 3430159, 351454, 353161, 353162, 353242, 353243, 353244, 353373, 353390, 353401, 353402, 353403, 353404, 353405, 353406, 353574, 355021, 355221, 355516, 355517, 357863, 357906, 358719, 358957, 363161, 371559, 371560, 371561, 371562, 371563, 379878, 379879, 379880, 379881, 379882, 379883, 386757, 386931, 388887, 388888, 388889, 388890, 3951594, 616662, 616663, 616701, 62753, 62955, 62977, 65206, 65534, 66076, 692726, 701181, 8054454, 8054711, 8055239, 8066080, 8316037, 8524791, 8524801, 8533269, 8572540, 91668, 92077, 92164, 92266, 92273, 92274, 92275, 92324, 92440, 92818, 93166, 93167, 93168, 93343, 93684, 95000, 96142, 97413, 97524, W10128818, W10128819, W10131401, W10167585, W10211144, W10236981, W10240485, W10297436, W10297437, W10297438, W10297441, W10297449, W10312655, W10429300, W10431037, W10531633, W10531637, W10556728, W10590949, W10639078, W10748451, W10753364 Show less
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

10 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
November 5, 2017
I have ordered the water level pressure switch and water pressure tube to solve the problem of my washer not filling water and when it did, it would overflow. Can you give me the weblink on your site where I can see a video to replace both parts.Thank you
For model number LSQ9010KT0
Hi John, Thank you for the question. Unfortunately we do not offer a video at this time on how to install the pressure switch and hose on your model number.Here are some basic steps.Remove the two Phillips-head screws in the front corners of the console on the top.Tip the console back on the hinges that secure the top of the console to the washer.Once you have the console loose, you need to remove the knob, and remove the air hose from the switch.Then remove the cabinet to access the air hose where it attaches to the outer tub assembly, on the right rear portion of the tub. Remove the console screws and tilt the console into the service position. Unplug the lid switch connector from the connector in the washer top. Remove the cabinet mounting clips by using the flat blade screwdriver in the clip. Remove the cabinet by tilting it forward and pulling it away from the washer. The rear panel can be tilted back for better access to components at rear of machine by twisting the rear panel support 90°. and then tilting the rear panel back.Hope this helps!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Paul
November 24, 2017
Will notl let water in hot or cold
For model number wtw5700aco
Hi Paul, Thank you for contacting us regarding this situation. If your washer is not letting in hot or cold water, then There are some parts that you will need to check to see which one is causing the issue. You will need to check the water inlet valve, the water lines and the lid latch assembly, I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
DEAN
January 22, 2019
Washer will not finish cycle
For model number WTW8600YW0
Hello Dean, Thank you for the question. In order to troubleshoot the issue we will need a bit more information. What cycle is it in when it will not finish? Can you turn the knob manually and have the cycle finish? Are you getting any errors or blinking lights? The more information the better. Look forward to hearing from you.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Dave
October 19, 2021
Water pump keeps running after end of cycle. No error code. End of cycle light is on and clothes are properly cleaned. Smacking the top of the washer stops the pump. Thanks for any help!
For model number WTW8200YW0
Hello Dave, Thank you for the question. If hitting the appliance turns the pump off, you could have a loose wire connection somewhere. If the Wiring is good, this could indicate a defective Control Board or Drain Pump. We hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Vicki
November 21, 2018
Sometimes our water will continue filling the machine during different phases of the cycles when it shouldn't. Sometimes it will continue after the water has filled for the rinse cycle (flooding our floor). Other times it will continue running water as it's pumping out a wash or rinse cycle. And then there are times it will wash a few loads no problems from start to finish. I have unplugged the power several times when it does this and the water continues to run! If the problem was the timer we think it would be more consistent in where it messes up each time. So we are leaning toward the water inlet valve. We would like to be able to wash without having to continually check on it each time we wash! Thanks for your input on our problem.
For model number MVWC300VW1
Hello Vicki, Thank you for the question. This sounds like the water valve is becoming stuck open and is defective. The valve is not repairable so it will need to be replaced, PartSelect Number: PS11749042. Hope this helps, good luck with this repair!

Was this helpful?
Thank you for voting!
Related Parts:
Ken
January 29, 2019
After wash cycle is complete water drips thru detergent tray.
For model number wtw7040dw
Hi Ken, Thank you for your question. If there is water in your detergent dispenser after a cycle. Take the detergent drawer out and give it a good cleaning to remove any soap or fabric softener residue from it. This should should resolve the issue. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Yetzel
June 5, 2019
Hello, This washer on test mode shows me an error code of F32 and then it finishes the test mode without problem but, when you put the machine on a normal cycle to start washing the clothes just put little water and aping, little water and doing and kept doing the same thing over and over again I don't know why ???
For model number WTW8540BW1
Hi Yetzel, Thank you for your question. The F32 error code stands for Long Drain which means the control has recognized the water in the tub is not draining fast enough during the cycle. Here are some things that you will need to check. Make sure the pump and drain hose are clear of debris that would cause a blockage. Check the impeller on the drain pump and make sure it is not damaged. Remove the tub hose from the pump to the tub and check it for blockage. Make sure the pump is running and that it is getting the proper voltage when it should be. If everything checks out fine, then replace the drain pump motor. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Brenda
July 16, 2019
Will this resolve the LF error code, or do we need the water lever switch? If we need the switch, please advise part information. We checked the hoses and they are clean and clear. Water inlet valves are open.
For model number MVWB300WQ1
Hi Brenda, Thank you for your question. The LF error code is letting you know that the washer is taking too long to fill with water. If you have checked the hoses and they are clean and the water is turned on for the water inlet valve, check to see if the valve screens are clear. If they are try pressing POWER/CANCEL to clear the display to see if the LF error code will remain or if this clears it. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Karen
September 5, 2019
My washer will not go into the spin cycle. I have to stop it and do it manually
For model number mvwx550xw1
Hello Karen, thank you for your question. We would recommend testing/replacing the Shift Actuator - 120V 60Hz Part Number: WPW10006355 first. If that isn't the problem, the cause of this issue might be with the electronic board. I hope this helps!

Was this helpful?
Thank you for voting!
Steve
November 13, 2018
My washer fills to desired level and washes and then drains. The problem occurs when it fills for the rinse cycle. The washer will then fill to the desired level for the rinse cycle and start agitating. But the water will then continue running while the machine agitates and run over into the floor unless we stop it manually.
For model number MVWC300VW1
Hello Steve, thank you for your question. I would recommend replacing the timer. From the sounds of it, the valve is working and the pressure switch is working, because when you start the unit, it fills, and agitates no problem. The issue is during the rinse cycle only. If the water continues to run ONLY during the rinse cycle the issue could be the timer. I would recommend testing the switch, just to be sure, and checking the pressure hose to be sure there aren't any kinks or the hose isn't being pinched during a full heavy load. I hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 2 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
water overflowing when filling
I ordered the parts at a minimal cost compared to the repairman's quote, they arrived in 3 days. I used the laptop and put it right next to where I was working so that I could follow the directions step-by-step. The instructions were easy to follow and showed you right what to do so I never had any questions. My washer had a slightly different configuration but I figured it out. Replacing the parts was simple, take one off, put the other on. Putting the washer front back on was a little tricky, I had to have my daughter help me hold it in place while I wiggled it around to make sure it was just right before I screwed it back together. It was easier than I thought it would be. I told my husband I loved the internet, I would never have been able to do this job without the instructional video. Thanks PartsSelect!
Other Parts Used:
Water Inlet Valve with Mounting Bracket
  • Marni from Buhl, ID
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Screw drivers
34 of 54 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer Overfilled - Timer Not Running
When the washer overfilled I thought I had a level switch issue, and I replaced it and the tube. Was still having problems with it advancing, and replaced the timer. I may have caused the problem myself as I crossed 2 wires on the level switch and it took awhile to figure out my error and why it still didn't work. Next time I take a picture. Was the washer worth sinking $225.00 into it? It's over 25 years old and the only other repair was the motor coupling and clutch a couple years ago. This is probably the last time but the wife really likes the machine and was unhappy when I suggested replacing it. From what I read about the new ones with electronic control I may be better off keeping this one going as long as I can get parts.
Other Parts Used:
Water-Level Pressure Switch
  • john from Pittsfield, ME
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
2 Reviews
3.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741846
Manufacturer Part Number: WP353244
Brand
Model Number
Description
Kenmore
10682872600
Washer - Kenmore Washing Machine Model 106.82872600 (10682872600, 106 82872600) Parts
Kenmore
11010202000
Washer
Kenmore
11010202001
Washer
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012202100
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11013202200
Washer
Kenmore
11013212200
Washer
Kenmore
11014112300
Washer
Kenmore
11014202300
Washer
Kenmore
11014212200
Washer
Kenmore
11014222300
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11015732400
Washer
Kenmore
11015842400
Washer - Kenmore Washing Machine
Kenmore
11015852400
Washer
Kenmore
11015862400
Washer
Kenmore
11015864400
Washer
Kenmore
11015942400
Washer
Kenmore
11015942401
Washer
Kenmore
11015944400
Washer
Kenmore
11015944401
Washer
Kenmore
11015952400
Washer
Kenmore
11015952401
Washer

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service