Whirlpool WP3406725 - Timer, 60 Hz. | PartSelect.ca
Timer, 60 Hz. – Part Number: WP3406725
( Grid squares measure 1x1 inch )
Timer, 60 Hz. – Part Number: WP3406725 Timer, 60 Hz. – Part Number: WP3406725 Timer, 60 Hz. – Part Number: WP3406725 https://partselectca.azureedge.net/Schematics/Maytag/FDZMZTFG.gif

Timer, 60 Hz.

Your Price

CAD$207.78

PartSelect Number PS11741713
Manufacturer Part Number WP3406725
Manufactured by Whirlpool

This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.

This part works with the following brands: Whirlpool, Maytag, Amana, Crosley.

This part works with the following products: Dryer.

This part fixes the following symptoms: Will Not Start | Timer will not advance | Will not shut off | Shuts off too soon

Questions & Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Customer Repair Stories

Average Repair Rating: 4.2 / 5.0, 7 reviews What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Christina from Rock Hill, SC
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
Parts Used:
WP3406725
Dryer wouldn't stay on
Determined that the knob/timer assembly wasn't working properly by testing the start button when holding the knob in different places. Disassembled the timer from the back of the dryer and used information on timer to order replacement part (partselect was used after a thorough search for both price and delivery time - both were superior with partselect.com). Received the timer assembly overnight and placed in dryer with success. (Took a digital photo before disassembly to assist with reassembly).
35 of 41 people found this instruction helpful.
Was this instruction helpful to you?
Robert from Coffee Springs, AL
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Parts Used:
WP3406725
Timer wouldn't advance.
Remove back cover plate to provide access to the timer. Remove the two screws which retain the component in place. Change wires one by one to the replacement part. Reinstall component and return screws in same order removed.
23 of 24 people found this instruction helpful.
Was this instruction helpful to you?
Jerry from Marquette, MI
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP3406725
The dryer wouldn't keep running after being started.
1. took off back panel 2. unswrewed old timer 3. removed wires from old timer one at a time while each time a wire was removed it was connected to the corresponding spot on the new timer. Doing this in sequence made sure the wires were connected correctly to the new timer. 4. re-attached the new timer to the dryer and replaced the back plate.
14 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Phillip from Pekin, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP349639, WP3406725, WP3392519
Dryer stop working after I moved the timer setting while dryer was running. So I replaced the thermal fuse while I had the dryer away from the wall, plus the lint filter was torn.
The repair was easy, what took the longest was cleaning the lint from the inside of the dryer and the housing that holds the lint filter. The inside of our dryer is now as free of lint as the day we bought it.To make the repairs I pulled the dryer away from the wall and removed the vent hose and unplugged the dryer from the outlet.I then removed the screws from the back panel so I could replace the thermal fuse. I did this by removing one screw from the thermal fuse and pulled it free from the dryer.I then installed the new thermal fuse and screwed it to the dryer.Then I removed one wire at a time and installed them to the new thermal fuse.I then screwed the back panel to the dryer.Next I removed the screws and panel behind the control panel of the dryer so I could replace the timer.Once I could see the timer I compared my timer to the new one before doing anything else.Then I removed control knob from front of timer.Removed the screws holding old timer in place.Installed new timer to dryer with same screws and installed control knob to timer.Then I removed one wire at time from old timer and installed to new one, I did this until all wires had been connected.Then I installed the panel to the back of the control panel with the same screws.Installed new vent hose to back of dryer and plugged cord back into the outlet. Pushed dryer back into place.Remove old torn lint filter and replaced it with the new one.Wife then tried dryer out and it worked. Dryers been working just fine ever since.
7 of 9 people found this instruction helpful.
Was this instruction helpful to you?
JAMES from TROY, MI
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Wrench set
Parts Used:
WP3406725
Timer failed, needed replacement.
Unplugged the dryer from the electrical outlet. Simply removed the screws holding the long plate behind the dryer controls. Took two screws out that attached the failed timer to the dryer. Was careful to pull wiring out of the failed timer one wire at a time, replacing the wires into the new timer so as to be sure the wires were attached to the new timer in the right sequence. Some of the wires were difficult to remove from the failed timer, needed to use a pliers or a screw driver to remove some of the wires. Attached the new timer to the dryer with two screws as the failed timer had been attached. Replaced the back panel to the dryer & plugged the dryer back in to the electrical outlet.
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Phillip from Pekin, IL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP3406725
I broke the timer by moving it while dryer was still running
Moved dryer out into room so I could work on it. Unplugged from wall outlet and disconnected dryer vent.Removed screws from panel on the back side of the control panel.Compared timer on dryer to new one in box.Then I removed knob on front of timer.Removed screws holding timer to dryer.Installed new timer to dryer with same screws holding old timer to dryer.Placed knob on front of timer.Removed one wire connection at a time from old timer and installed to new timer.I did this until all the wire connections had been transfered.Re-installed panel on back of control panel.Connected new vent hose to dryer. ( Since dryer was away from wall I replaced my old vent hose with a new one.)Plugged dryer back into outlet and placed dryer back in place beside the washing machine.Wife then tried the dryer out and it's now working fine again.
4 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Daniel from Burlington, CT
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Parts Used:
WP3406725
The dryer would not start and the timer would not advance
After disconnecting the dryer and removing the upper back plate I removed the timer without removing any of the wires from it. Then I installed the new timer and placed each wire from the old timer onto the new timer in the same terminal positions that they were on the old timer. After reassembling the dryer I plugged it in and tested it and it worked correctly.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?

Model Cross Reference

Brand
Model Number
Description
Whirlpool
1CWED5700VW0
Dryer - Residential
Whirlpool
1CWGD5700VW0
Dryer - Residential
Whirlpool
1CWGD5700VW2
Dryer
Whirlpool
1CWGD5850SW0
Dryer - Residential
Whirlpool
7MGGQ9800ML0
Dryer - Residential
Whirlpool
7MGGQ9800PL0
Dryer - Residential
Whirlpool
7MGGQ9800PL1
Dryer - Residential
Whirlpool
7MLGQ8000JQ0
Dryer - Residential, Gas
Whirlpool
7MLGQ8000JQ1
Dryer - Residential, Gas
Whirlpool
7MLGQ8000JQ4
Dryer - Residential
Whirlpool
7MLGQ8000JQ5
Dryer - Residential
Whirlpool
7MLGQ8000PW0
Dryer - Residential
Whirlpool
7MLGQ8857JQ1
Dryer - Residential, Gas
Whirlpool
7MLGQ8857JQ4
Dryer - Residential
Whirlpool
7MLGQ8857JQ5
Dryer - Residential
Whirlpool
7MLGQ8857JQ6
Dryer - Residential
Whirlpool
7MLGQ8857JT1
Dryer - Residential, Gas
Whirlpool
7MLGQ8857JT4
Dryer - Residential
Whirlpool
7MLGQ8857JT5
Dryer - Residential
Whirlpool
7MLGQ8857JT6
Dryer - Residential
Whirlpool
7MLGQ8857PQ0
Dryer - Residential
Whirlpool
7MLGQ8857PT0
Dryer - Residential
Maytag
7MMGM0110WW0
Dryer - 29" GAS DRYER
Whirlpool
7MWG66740SG0
Dryer - Residential
Whirlpool
7MWG66740SM0
Dryer - Residential
Whirlpool
7MWG66740SW0
Dryer - Residential
Whirlpool
7MWG99930VH0
Dryer - Residential
Whirlpool
7MWG99930VW0
Dryer - Residential
Whirlpool
885450
Dryer - ELECTRIC DRYER
Whirlpool
885453
Dryer - ELECTRIC DRYER