Whirlpool WP3392519 - Thermal Fuse | PartSelect.ca
Thermal Fuse – Part Number: WP3392519
Thermal Fuse – Part Number: WP3392519 Thermal Fuse – Part Number: WP3392519 Thermal Fuse – Part Number: WP3392519 https://partselectca.azureedge.net/Schematics/Whirlpool/SNBNEJXS.gif

Thermal Fuse

33 Reviews

Your Price

CAD$13.52

PartSelect Number PS11741460
Manufacturer Part Number WP3392519
Manufactured by Whirlpool

This part is a one-time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when there is no longer continuity between the pins. Terminal size is 3/16".

This part works with the following brands: Whirlpool, Kenmore, KitchenAid, Roper, Estate, Inglis, Maytag, Crosley, Amana, Admiral, Magic Chef.

This part works with the following products: Dryer, Washer Dryer Combo.

This part fixes the following symptoms: No heat or not enough heat | Will Not Start | Takes too long to dry | Shuts off too soon

Videos For installing this part.

Questions & Answers
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Installation Instructions Provided by PartSelect customers like you.
Average Repair Rating: 3.9 / 5.0, 348 reviews
What's this?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
ANTHONY from CHESHIRE, CT
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WP3392519
Dryer was working, but no heat.
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils.
Not knowing what the problem was I started looking at the coils and could not see any broken parts.
So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, it was held in place by two screws, once they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading.
I replaced with a new one and put it all back together the way I took it apart.
Then I plugged it in and it worked first time, I now have warm dry clothes.
2379 of 2666 people found this instruction helpful.
Was this instruction helpful to you?
Dana from Grassvally, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
Parts Used:
WP3392519
No heat but would run otherwise
Cleaning the lint out of the whole machine took quite a bit of time--it was everywhere. Underneath the lint trap was a collection that ultimately ruined the thermal fuse where it restricted the air flow considerably.

Ascertaining the problem was the most time consuming part.

The actual repair was quite simple and didn't take but 15-20 minutes.
728 of 769 people found this instruction helpful.
Was this instruction helpful to you?
JOSEPH from PUTNAM VALLEY, NY
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WP8318268, WP3392519
gas dryer not heating up.
First removed front and drum to check gas valve and igniter. No gas, no ignition. Checked power to devices; none (check hot line to ground, not to neutral.). Removed back of control panel looking for a relay or something. Found none, but did find a wiring diagram. That is where the site really came in handy. Studied wiring diagram together with the exploded view and pictures of each part to come up with a troubleshooting plan. Took the back off as well as a cover inside. Tested each part with meter, again going to ground and not across the device. Of course, the final device before the gas valve, a one time thermal fuse, was the bad part. At first assumed just a bad part. Later wondered if fuse did it's job and another part was bad. Ordered and installed new thermostat just in case. Put everything together after a complete cleaning and everything is fine so far. Not a particularly hard job because I had the wiring diagram and access to parts select site. Would have been much harder without them. Took a long time because almost the entire dryer had to come apart. But it got a good cleaning because of it and found a couple of bucks in change to help offset the cost. Can't imagine what a service call would have cost.
490 of 532 people found this instruction helpful.
Was this instruction helpful to you?
TEODY from MILPITAS, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
WP3392519, 279311
No Heat. Dryer keeps running but no heat to dry clothes.
Repair was very easy. We are in the internet age so I use it all the time to get info on how to repair any thing in the house including cars. This time it was my dryer. I typed up 'Kitchen Aid dryer has not heat'and pressed searched and PartSelect came up. Typed in the model number and looked up the comments on No Heat. They had pretty cool site that shows videos on how to repair this things too. Came to conlclusion that the THERMAL FUSE was the main problem. Ordered it and as well as the Igniter assy just to make sure and as well as save on the shipping just in case. Ordered on Sunday night and the shipped the next day. It arrived on Tuesday. Unfortunately had a little problem on the shipment. Called PartSelect and they are so awesome they shipped me new parts asap at no extra charge. Awesome Awesome! Parts came in Thursday and first installed the Thermal Fuse and BAAAM! problem solved. Did not need the igniter assembly. Now I have an extra part in storage.
To replace the Thermal fuse.
1. Disconnect Dryer from power outlet. Remove the bolts on the back panel with a 1/4" socket. I used power drill because it is much faster.
2. Locate the Thermal Fuse. Disconnect wires and remove the bolt. Slide it up and pull. Install the new one and reconnect the wires. Replace the panel and plug the dryer.

That solved my problem. It should solve yours too. The whole process was less than five minutes.
482 of 600 people found this instruction helpful.
Was this instruction helpful to you?
Michael from Worcester, MA
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Parts Used:
WP3392519, WP3387134
Dryer will not turn on
Followed electrical drawing from switch to motor, Thermal fuse was in the line and no power coming through it, removed wire and put together and tested, dryer turned on. Read statements from others at parts select and also bought thermostat because time stopped working last year. Installed both parts and cleaned dryer, works perfect including timer.
387 of 496 people found this instruction helpful.
Was this instruction helpful to you?
Steven from East Norriton, PA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Socket set
Parts Used:
WP8577274, WP3392519
Dryer overheated, blew out thermal fuse
I started to repair this and got busy and ended up calling a repair service -- that was the first time. They repaired it for over $200 and said the cause was bad venting. I fixed the vent before using the fixed dryer but it blew again. So I ordered these parts and replaced them myself for a lot of savings. However, the dryer still overheated. Through lots of testing I found the root cause the repairman missed: The heating element had gotten so hot that the assembly holding it warped, hitting the element and shorting it. So a new element is on order. I still needed the parts I ordered here but the overall repair ended up more complicated and expensive. I was disappointed a paid repair person left without further diagnosis. If he had unplugged the vent and checked the heat on the exhaust vent (as I ended up doing) it would have been obvious more than a new thermal fuse/thermistor was necessary. Instead I wasted over $200 on his visit. So my advice is if you're at all handy, repair this yourself. The dryer has a service manual inside the front toe board that walks you through most diagnostics and tests. However, it took a little more than that for me to discover the heating element problem. This was a very dangerous situation that could have easily led to a fire, yet not found by a trained technician!
317 of 360 people found this instruction helpful.
Was this instruction helpful to you?
Hector from Whittier, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Parts Used:
W11050897, WP3392519, WP3387134
Dryer wouldn't heat
I first unplugged the electrical plug, then opened up the dryer, front and back. Once I had diagnosed the problem I unscrewed the thermal fuses and thermostat. Marked which color wire went to which connector and continued to replace one wire at a time. Re-attached the mounting screws, verified all wires were connected, plugged in dryer to test heat cycle. Once the dryer worked correctly I vacuumed all lint and covered it up.
191 of 242 people found this instruction helpful.
Was this instruction helpful to you?
Colin from Bellingham, WA
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Parts Used:
WP3392519, WP3387134
Dryer wouldn't turn on.
When my dryer suddenly stopped functioning, without any prior signs of pending failure, I guessed that it had to be something simple, like a fuse. I did a google search and stumbled across a forum post that described the symptoms (wouldn't turn on), and the poster said that Whirlpool recommends replacing the thermostat whenever the fuse is replaced. The reason for this is that the likely cause of the fuse burning is that the thermostat is no longer properly regulating the temperature range of the heating element.

I disconnected the power source, and then I removed the back cover, and both parts were in plain view, so I simply replaced the wires one by one.
169 of 193 people found this instruction helpful.
Was this instruction helpful to you?
Jeffery from Plymouth, IN
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
WP3392519, WP3387134
Thermal fuse blown
I spent nearly an hour trying to self-diagnose the problem before I wised up and found PartSelect.com. After reading just a couple of postings I went back and tested the thermal fuse. It was bad. Other posts suggested I replace the thermostat at the same time, so I ordered both. The parts arrived within three days and the actual repair took less than 10 minutes.
116 of 126 people found this instruction helpful.
Was this instruction helpful to you?
kat from powell, OH
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Socket set
Parts Used:
WP3392519, 279816
no heat
First, I replaced the heating element which was super easy but I still didn't have heat - frustrating! I then ordered the thermal cut-off kit and thermal fuse. I replaced the thermal fuse and still no heat. Then, I took one of the fuses from the kit and replaced that and finally got heat. There was another fuse in this kit that I still don't know where it goes but right now I don't need it. Had I known (by a volt tester) this would have been super easy to fix, but I didn't have one so it was trial and error. I did find out, however, that if the heating element goes it usually takes the fuse with it. The fuse I replaced (that finally gave me heat) was located in the casing just above the element. I hope this helps!
107 of 123 people found this instruction helpful.
Was this instruction helpful to you?
Customer Reviews
Average Rating:
33 Reviews
4.7
out of 5
Filter By Rating:
  • 5 Stars
    27
  • 4 Stars
    3
  • 3 Stars
    1
  • 2 Stars
    2
  • 1 Stars
    0
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".

Model Cross Reference

Brand
Model Number
Description
Kenmore
10688419100
Dryer
Kenmore
10688419300
Dryer
Kenmore
110.6012990
Dryer - Kenmore Dryer Model 110.6012990 (1106012990, 110 6012990) Parts
Kenmore
110.6085299
Dryer - Kenmore Dryer Model 110.6085299 (1106085299, 110 6085299) Parts
Kenmore
110.7080299
Dryer - Kenmore Dryer Model 110.7080299 (1107080299, 110 7080299) Parts
Kenmore
110.765340284414694
Dryer - Kenmore Dryer Model 110.765340284414694 (110765340284414694, 110 765340284414694) Parts
Kenmore
110.76702690
Dryer - Kenmore Dryer Model 110.76702690 (11076702690, 110 76702690) Parts
Kenmore
110.76862692
Dryer - Kenmore Dryer Model 110.76862692 (11076862692, 110 76862692) Parts
Kenmore
110.77834792
Dryer - Kenmore Dryer Model 110.77834792 (11077834792, 110 77834792) Parts
Kenmore
110.796228
Dryer - Kenmore Dryer Model 110.796228 (110796228, 110 796228) Parts
Kenmore
110.798328
Dryer - Kenmore Dryer Model 110.798328 (110798328, 110 798328) Parts
Kenmore
110.97263100
Dryer - Kenmore Dryer Model 110.97263100 (11097263100, 110 97263100) Parts
Kenmore
110.97263800
Dryer - Kenmore Dryer Model 110.97263800 (11097263800, 110 97263800) Parts
Kenmore
110.97561420
Dryer - Kenmore Dryer Model 110.97561420 (11097561420, 110 97561420) Parts
Kenmore
110.9975820
Washer Dryer Combo - Kenmore Washer/Dryer Combo Model 110.9975820 (1109975820, 110 9975820) Parts
Kenmore
110.C85081400
Dryer - Kenmore Dryer Model 110.C85081400 (110C85081400, 110 C85081400) Parts
Kenmore
110.C85087400
Dryer - Kenmore Dryer Model 110.C85087400 (110C85087400, 110 C85087400) Parts
Kenmore
110.C85088400
Dryer - Kenmore Dryer Model 110.C85088400 (110C85088400, 110 C85088400) Parts
Kenmore
110.C85089400
Dryer - Kenmore Dryer Model 110.C85089400 (110C85089400, 110 C85089400) Parts
Kenmore
110.C87561601
Dryer - Kenmore Dryer Model 110.C87561601 (110C87561601, 110 C87561601) Parts
Kenmore
110.C87562601
Dryer - Kenmore Dryer Model 110.C87562601 (110C87562601, 110 C87562601) Parts
Kenmore
110.C87566601
Dryer - Kenmore Dryer Model 110.C87566601 (110C87566601, 110 C87566601) Parts
Kenmore
110.C87571601
Dryer - Kenmore Dryer Model 110.C87571601 (110C87571601, 110 C87571601) Parts
Kenmore
110.C87572601
Dryer - Kenmore Dryer Model 110.C87572601 (110C87572601, 110 C87572601) Parts
Kenmore
110.C87576601
Dryer - Kenmore Dryer Model 110.C87576601 (110C87576601, 110 C87576601) Parts
Kenmore
110.C96562500
Dryer - Kenmore Dryer Model 110.C96562500 (110C96562500, 110 C96562500) Parts
Kenmore
110088732791
Washer Dryer Combo
Kenmore
11060012000
Dryer
Kenmore
11060012001
Dryer
Kenmore
11060012002
Dryer