This gray door gasket is used to seal the dryer door when closed. It does not come with the adhesive.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Kenmore, Whirlpool, Roper, KitchenAid.
Part# WP3390733 replaces these:
239119, 337965, 3390733, 339446, 339466, 685762
Customer Repair Stories
Average Repair Rating: 3.7 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door Gasket Came Off The Dryer And Tangled In Clothes
I haven't been able to do the repair yet because the door gasket has to be "glued" in and the gasket doesn't come with a sealer of any sort. It is just the rubber ring. I am going to have to go to my local lowe's or home depot and ask someone to help me find what I need to glue the gasket in place. The repair itself should be simple. The gasket just sits in the "groove," but without a sealer of some sort, the gasket will come loose again and I will be back to having a dryer that takes twice as long to dry my clothes.
Other Parts Used:
Jennifer from Biloxi, MS
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
14 of 32 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
burner wouldn't light
removed the back of the appliance disconnected the vent pipe. Found the problem was a flying squirrel had committed suicide in the vent pipe and as a result had blown the thermal fuse. Tested the fuse to see it was blown with a multi-meter. Ordered the fuse from PartSelect online. fair price shipping was quick. Received the new fuse in 4 days and had the dryer working again in about 10 minutes.
1. Made sure the seal fit (correct seal) 2. Cut off the old seal 3. Washed around the fridge and door with warm water 4. Unscrewed the hinge and took the door off 5. Seated the new seal on the door (set door on a flat surface) 6. Put the hinge back on the fridge
GOOD AS NEW...
Other Parts Used:
Mark from Hickory, NC
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stephen
December 13, 2022
Does WP3390731 fit my model? Need 15 1/2 inch diameter door seal.
For model number LER5634AQO
Hi Stephen,
Thank you for your question. Part number WP3390731 would not be the correct door gasket for your dryer. The part number listed under your model number for the door gasket is WP3390733. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Peter
July 6, 2023
The door gasket--part WP3390733--you sell doesn't come with adhesive, so I'll need to buy adhesive at a hardware store. What kind of adhesive or sealer do you recommend for use with this part?
For model number LE6810XPW0
Hello Peter, thank you for getting in touch. The silicone rubber adhesive, part number PS11740605, is used for gaskets on dryers and felt seals. If you need help placing an order, customer service is open 7 days a week!
