Part Location Diagram of WP3390719 Whirlpool Disposable Thermal Fuse - Two Terminal
See part 16 in the diagram
Replacing your Kenmore Dryer Disposable Thermal Fuse - Two Terminal
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Disposable Thermal Fuse - Two Terminal

★★★★★
★★★★★
8 Reviews
$22.91
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11741444
Manufacturer Part Number WP3390719
Manufactured by Whirlpool
Product Description

Disposable Thermal Fuse - Two Terminal Specifications

This part attaches to the exhaust duct of your clothes dryer.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Kenmore Dryer Disposable Thermal Fuse - Two Terminal

Replacing your Kenmore Dryer Disposable Thermal Fuse - Two Terminal
Troubleshooting
This part fixes the following symptoms:
Too hot | Not Heating
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Maytag.
Part# WP3390719 replaces these:
AP6008309, 279650, 3389639, 3389640, 3390719, 660877, 688841, 690198, 690798, 80004, WP3390719VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
8 Reviews
4.8
Filter By Rating:
  • 5 Stars
    6
  • 4 Stars
    2
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 25 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
dryer would not heat.
I checked parts select.com and followed the guide lines,ordered the correct parts thanks to the web site help.parts arrived in 2 days,A very easy install and back to work drying clothes.Thanks parts select.
Other Parts Used:
Thermal Cut-Off Fuse Kit Dryer Radiant Flame Sensor Dryer Cycling Thermostat
  • Russell from LA VERNE, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
155 of 172 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer wouldn't dry
un pluged it then removed the hose took the back off took out the 2 screws out of each part replace it with the new parts , then pluged it back to make sure it would work and it did the very first time. i'm 1 happy roper owner.
Other Parts Used:
Door Catch Kit
  • JEFFERY from ABINGDON, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
110 of 191 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer wouldn't turn on
Removed the back of the dryer taking off the screws. Found the disposable thermal fuse. Unplugged the 2 blue wires connected to it. Removed the screws holding the part in. Replaced the old part. Reattached the blue wires. Put the back on the dryer. And voila! That simple!
I'm a 39 year old woman with absolutely no patience for tedious jobs, but this was so easy I felt good about doing it. And felt even better for saving lots of money by doing the repair myself.
Other Parts Used:
  • Olive from Williamsburg, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
48 of 63 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer wouldnt heat
All parts were correct is what I should say to begin. Replacing the parts was a bit difficult, but I got the job done. My Kenmore dryer has been serving our needs faithfully for 14 plus years, and hopefully with these new parts, it will last a bit longer, thanks to your service parts. Much appreciated, and keep up the good work!
Other Parts Used:
Dryer Cycling Thermostat High Limit Thermostat - Limit: 205-40
  • ANTHONY from STATEN ISLAND, NY
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Pliers, Screw drivers, Socket set
33 of 667 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer stopped working and would not start.
After unplugging the dryer, I removed the bottom panel in front. Remove the the filter inside the dryer and remove the filter housing below. There you can see the thermal fuse on the air duct, its white with two blue wires. You can check it with a ohmmeter after removing the wires. If its open its bad. Its held in place with two sheet metal screws. After replacing the thermal fuse the dryer worked fine. However I would suggest cleaning the air duct and the outside discharge opening. Hope this helps.
Other Parts Used:
  • kevin from Saint Augustine, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
20 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Thermal fuse was bad.
Did an Ohm test on the old Thermal Fuse found it to be bad. Replaced it with a new and the dryer is back to working great. Your suggestions saved approximatley $150.

Thanks for the help.
Other Parts Used:
  • Brad from Odessa, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set
16 of 21 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The dryer burner wouldn't fire
Checked online for symptoms.
Pulled panel from front of unit (no tools required)
Vacuumed all lint from unit to see if that was a problem.
Removed the exhaust port which comes off with 3 hex head screws.

Based on the symptoms, I pulled the wires off the thermal fuse and did a continuity check on it. There was no continuity, so I knew I needed that part. Since a common reason for that to fail is the cycling thermostat allows the dryer to get too hot, I replaced that thermostat as well, just to be safe.

Due to closeness to the drum, I had to use a socket to remove the hex head screws on the two electronic parts.

Total time was about 40 mins. to diagnose and 20 mins. to replace the parts and verify correct operation.
Other Parts Used:
Dryer Cycling Thermostat
  • Dennis from Purcellville, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Socket set
9 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not turn on
We took the screws off of the back, took out the thermal fuse and replaced it with the new one.
We watched a video of how to do it which made it so easy.
Works great!
Other Parts Used:
  • Pam from Chandler, AZ
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would tumble but not heat.
Used an inexpensive multi-meter to detect that there was no continuity through thermal cut-off (high end) or disposable thermal fuse. I identified these parts by reading your online schematic of the dryer. I noted that the flexible ducting had been crushed on the dryer which lead to the feasibility that the thermal cut offs, especially the thermal fuse could have burnt out. Ordered the parts on Monday, drying clothes again on Wednesday.
Other Parts Used:
Timer Knob Thermal Cut-Off Kit
  • ANN from COON RAPIDS, IA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Nutdriver
7 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer would not start.
With the help of YouTube, I was able to watch videos of how to disassemble and reassemble the dryer. I watched a video showing where the Thermal fuse and Thermostat was located as well as how to test them with a meter. I watched another video showing how to replace the drum belt, showing step by step instructions. Without YouTube it would have been a whole different story!
Other Parts Used:
Dryer Cycling Thermostat Drive Belt
  • John from HATFIELD, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set
6 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

29 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Eric
August 10, 2017
My dryer has no power light indicator on. I unplugged the power cord and left it out for couple hours and still has no power. Checked out the outlet is working. Please advice what caused this problem. Thanks.
For model number GGW9868KL1
PartSelect logo
Hello Eric, that is a great question. The most common fix is the thermal fuse. I would start there, then check the thermostats. Hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Christopher
November 29, 2017
The indicator lights on dryer turn on when the power button is pressed but the dryer does not start. When you press start the light for sensing comes on but the dryer will not start.
For model number WED8500BWO
PartSelect logo
Hi Christopher, Thank you for your inquiry. There are some parts that you will need to check to see which one is causing the issue. You will need to check the disposable thermal fuse, the internal bias thermostat, the door catch, the belt, the pulley, the rollers, the high limit thermostat, the thermal use and the electrode sensor. I hope this helps. Thank you and have a great day!

5 people found this helpful.

Was this helpful?
Thank you for voting!
Claudia
September 18, 2019
Dryer has no heat
For model number 110 73952101
PartSelect logo
Hello Claudia thank you for writing .You should check the following parts for damage. Flame sensor # PS11741429 Thermostat # PS11746740 Thermal cut off # PS12070444 Hope this helps. Contact us anytime.

4 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Jimmy
March 27, 2019
Whirlpool mod wed8200yw2 Dryer want start. When it cut off it would not restart. Smelled smoke not sure from dryer. May have been over loaded. Lint filter full but it is emptied each time. Dryer vent not stopped up.
For model number WED8200YW2
PartSelect logo
Hi Jimmy, Thank you for your question. If the dryer is not starting, there are some parts that you will need to check to see which one is causing the issue. You will need to check the disposable thermal fuse and the internal bias thermostat. I hope this helps. Thank you and have a great day!

3 people found this helpful.

Was this helpful?
Thank you for voting!
Ron
January 14, 2018
Where is the thermal fuse on this unit? The dryer is not heating and I am not getting trouble codes. Want to test the fuse with my multi-meter but I cannot locate it.
For model number WED7300XW0
PartSelect logo
Hi Ron, Thank you for the question. The fuse is located on the Blower Housing. Please see the link to the video below. Hope this helps! https://www.youtube.com/watch?time_continue=294&v=CMzEVLu1-u0

2 people found this helpful.

Was this helpful?
Thank you for voting!
Ron
November 17, 2019
It will not start and the powerbutton as well as the start button flashes! Can you steer me in the right direction? Thank you!
For model number Wed8600ywo
PartSelect logo
Hi Ron, the only way to tell is to test individual components with a multimeter. My best guess is that there is a problem with the control board or as you have identified the fuses. Thank you for your question and good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Paul
September 9, 2019
I just replaced thermal fuse 3390719 and dryer is not heating. I also ordered cutoff tml w11050897, but this appears different than the one on the dryer. What do you suggest at this point
For model number 11070972990
PartSelect logo
Hi Paul. thank you for your question. When you are experiencing an issue like this there are a few parts that you will have to test to determine what is causing your issue. For all of these parts you can test them with a multi meter. First you will have to test your thermostats and thermal fuses to make sure they are all functioning correctly. After that you will want to test parts in this order, your m series coils, igniter itself, or your radiant flame sensor. You may also want to check your regulator just to make sure that part is functioning properly as well. Something else you should also check would be your filter and ducts. Make sure there is absolutely no blockage that would restrict air flow in your appliance. I hope that helps. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jeffrey
April 26, 2018
My dryer gets hot and the drum turns but the blower barely turns and the clothes are wet but hot?
For model number 110.68942892
PartSelect logo
Hi Jeffrey, Thank you for the question. I suggest removing the blower wheel and checking for damage on the wheel and where the wheel connects to the motor shaft. Sounds like the wheel might be stripped. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Ethan
October 30, 2017
I have a Whirlpool gas dryer. When I press the start button sometimes I heard a humming sound and the dryer will not spin. If I wait a while and press start it will spin but if I stop and or open the dryer door it will hum and not spin making me repeat this cycle. My guess is the motor can't handle the load and is going bad or something is causing too much of a load for the motor.
For model number cgm2751jq0
PartSelect logo
Hi Ethan, Thank you for the question. If the motor will kick on and tumble as normal after waiting for a bit then it should be fine. Normally if the motor was not operating it would not tumble at all. I suggest testing the Door Switch,PartSelect Number PS334284.This part recognizes whether the door is open or closed and tells the motor when to start. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Sam
December 17, 2017
No glow or heat. Took apart and removed part in heating chamber that looks to be 3" long, made up of ceramic or plastic at base,ceramic straw-sized piece covered with a metal spring. It just sat in 'v'shaped holder and could be removed easily. Trying to fix the dryer. What part or part replacement do i need? Thanks
For model number 11077995800
PartSelect logo
Hi Sam, Thank you for your question. There are a few parts that you will want to check for no heat or not enough heat. You should check your radiant flame sensor, your thermostats, your thermal fuses, your igniter, and your m series coils. You can test all of those parts with a multi meter to see which one is broken. Good luck with your repair.

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741444
Manufacturer Part Number: WP3390719
Brand
Model Number
Description
Kenmore
10686294140
Dryer
Kenmore
10686294340
Dryer
Kenmore
10686294540
Dryer
Kenmore
10686294740
Dryer
Kenmore
10686294840
Dryer
Kenmore
10687884100
Dryer
Kenmore
10687884300
Dryer
Kenmore
10687884600
Dryer
Kenmore
10697502820
Dryer - Kenmore Dryer Model 106.97502820 (10697502820, 106 97502820) Parts
Kenmore
11060052990
Dryer
Kenmore
11060052991
Dryer
Kenmore
11060056990
Dryer
Kenmore
11060056991
Dryer
Kenmore
1106007299
Dryer - Kenmore Dryer Model 110.6007299 (1106007299, 110 6007299) Parts
Kenmore
11060072990
Dryer
Kenmore
11060072991
Dryer
Kenmore
11060092990
Dryer
Kenmore
11060092991
Dryer
Kenmore
11060094990
Dryer
Kenmore
11060094991
Dryer
Kenmore
11060096991
Dryer
Kenmore
11060182000
Dryer
Kenmore
11060882990
Dryer
Kenmore
11060884990
Dryer
Kenmore
11060887990
Dryer
Kenmore
1106090199
Dryer - Kenmore Dryer Model 110.6090199 (1106090199, 110 6090199) Parts
Kenmore
11060901990
Dryer
Kenmore
1106090299
Dryer - Kenmore Dryer Model 110.6090299 (1106090299, 110 6090299) Parts
Kenmore
11060902990
Dryer
Kenmore
11060904990
Dryer
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service