Maytag/Maytag_Thumb/OWQ2PUAX.gif
See part 9 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Door Latch Bolt

★★★★★
★★★★★
1 Review
$67.47   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 66514212K901!
 Fits your 66514212K901!
PartSelect Number PS11741367
Manufacturer Part Number WP3380854
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Door latch failure | Door won’t close | Will Not Start
This part works with the following products:
Dishwasher.
This part works with the following products:
Whirlpool, Kenmore, Roper, Estate.
Part# WP3380854 replaces these:
AP6008234, 3368953, 3370260, 3380854
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

4 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sharon
November 4, 2017
Do you have a video on how to fix
For model number DU810SWKT0
Hi Sharon, Thank you for the question. We do not have a video as of yet for this Door Latch Bolt but here are some steps to install the part. First disconnect the dishwasher from the electrical supply. You will need to remove the inner door panel to access the door latch assembly. Disconnect the end of the door springs from the door spring adjustment holes in the frame. Open the dishwasher door and remove the eight 8 Torx screws securing the inner door panel from the door panel.Slide the inner door panel back toward the dishwasher to disengage the locking tab from the door panel. Lift the door panel away from the door.Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
David
October 23, 2017
How can I tell if I need the switch kit or the lever or the bracket that holds the switch?
For model number Du915pwpq
Hi David, Thank you for the question. The only real way would be to take the assembly apart to see if there is any physical damage to the bracket or the lever. Hope this helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
David
February 3, 2018
I need the repair video for the bolt latch assembly. I can't find it on your website
For model number Kenmore 665.13593k600
Hello David, Thank you for your inquiry. Although we do not have a repair video for this exact part number as of yet, I have included a link for a similar part to assist you. Hope this helps! https://www.youtube.com/watch?v=oLZ-7Py_hFQ

Was this helpful?
Thank you for voting!
Crystal
September 25, 2019
I am having issues with my Whirlpool dishwasher is not closing or latching. Some research i think i need to replace the latch, however i see there is the latch bolt but don't know what the part that goes inside of it to force the latch is to order. It says sold separately.
For model number DU920PFGQO
Hi Crystal, you may be talking about the switch pin WP3368955, in addition to the pin there is the latch lever PS342985 and latch bolt PS11741367. Thank you for your question and good luck with your repair!

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 2.1 / 5.0, 3 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Broken latch on dishwasher prevented operation
Photograph or diagram how the wires connect to the switches before taking out the old assembly. I could have salvaged switches from the old assembly by pulling out the white pins (and avoided buying the new switch kit). There's only one way the pieces go back together, so the wire connections are the only point that required special care and attention.
Other Parts Used:
Door Switch Kit LEVER Switch Pin
  • Thomas from Dunwoody, GA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers
134 of 198 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Broken latch on dishwasher prevented operation
Broken latch on dishwasher prevented operation
Door Latch Bolt PS11741367 replacement instruction.

There are no instructions known to mankind on this part, however I did manage said replacement through determination and beer. First I looked it up on the internet. All kind of results, except for the model I was working on. Called, very nice woman directed me to yet another YouTube presentation for another model. As this was no help, I chose to not call her back. Not her fault.
So, I did what every instruction for the other models called for, disconnect the power. Seemed like a good idea if everyone suggested it. After that, remove the inner door by removing the screws. At this point I would like to mention that I also ordered and paid for what I thought would be a set of inner door screws to replace the old and weathered ones. However, they sent me one screw.
Who in their right mind would pay $5.10 for ONE SCREW? Well, your looking right at him. I felt like I sold the family cow for a magic bean, but that’s another story.
So, without instructions, I compared the part I ordered with the one installed in the door. It matched up in many ways, with exception for the fact I would not budge from it’s position, wiggle yes, remove no. I stared at it for 10 minutes with no further progress. Something has to give. I decided to remove the cover of the electronics with the hopes and optimism of a child. It also did not want to be removed. Back to YouTube and the computer. Nothing. I stared at it for another 10 minutes. Drank a beer, and started to “horse” it off, somehow it became ajar, and was finally removed. Upon examination of the old door latch bolt, I noticed that it was attached to the electronic mass by 4 wires. I used my phone camera to record which went where with false hopes that the repair was in reach. It was either me or the dishwasher. At this point, good money was on the dishwasher.
After recording and removal of said wires, I took the entire door latch and whatever the other piece was, to a table for further study, and another beer. After said study and beer, I remembered looking at other parts, one came to mind, a small teflon rod. As I look upon the part I knew about, I noticed it was adhering to the alien part with wires by 2 small teflon rods. I found a small nail, and pushed them out of the part, and they final separated. I replaced the old part with the new one and then reversed all steps and procedures, attached wires, reattached electronic cover, screwed down the inner door, shut main door, and started a dish cycle. Works perfectly. You may ask about the expensive screw. I took it to a local jeweler, who found nothing remarkable about it. As there must be SOMETHING about it that makes it valuable, so I had it mounted and framed in a nice display case for friends and family to treasure for years to come. A real conversation piece, and one more thing to dust.
Other Parts Used:
SCREW, DOOR
  • Michael from Patterson, CA
  • Difficulty Level:
    Very Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers
31 of 37 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher door would not close properly and dishwasher would not come-on.
Searched various how to fix videos on your web site and YouTube.. Photographed old unit installation and wiring with my phone. Then labeled wires. I removed old latch and bolt with microswitches. Checked switches with ohmmeter which seemed to work well. Order new bolt and latch from this site . On arrival of new parts, assembled new unit using old one as model. Removed micro switches from old unit and installed them on new one. Confirmed switch function with ohmmeter. Installed replacement latch/ bolt. Closed circuit breaker at box and confirmed that door latch worked and dishwasher came on.
Other Parts Used:
Latch Lever
  • Marc from Seattle, WA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741367
Manufacturer Part Number: WP3380854
Brand
Model Number
Description
Kenmore
110723120
Dishwasher
Kenmore
110773811
Dishwasher
Kenmore
110773812
Dishwasher
Kenmore
110773813
Dishwasher
Kenmore
110773881
Dishwasher
Kenmore
110773882
Dishwasher
Kenmore
110773883
Dishwasher
Kenmore
66513402K900
Dishwasher
Kenmore
66513402K901
Dishwasher
Kenmore
66513409K900
Dishwasher
Kenmore
66513409K901
Dishwasher
Kenmore
66513442K900
Dishwasher
Kenmore
66513442K901
Dishwasher
Kenmore
66513443K900
Dishwasher
Kenmore
66513443K901
Dishwasher
Kenmore
66513444K900
Dishwasher
Kenmore
66513444K901
Dishwasher
Kenmore
66513449K900
Dishwasher
Kenmore
66513449K901
Dishwasher
Kenmore
66513492K600
Dishwasher
Kenmore
66513499K600
Dishwasher
Kenmore
66513592K600
Dishwasher
Kenmore
66513593K600
Dishwasher
Kenmore
66513594K600
Dishwasher
Kenmore
66513599K600
Dishwasher
Kenmore
66513692K600
Dishwasher
Kenmore
66513699K600
Dishwasher
Kenmore
66514212K900
Dishwasher
Kenmore
66514212K901
Dishwasher
Kenmore
66514213K900
Dishwasher

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service