Average Repair Rating: 4.5 / 5.0, 12 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
door insert all scatched up
Took me a while to figure out that the bottom plastic strip is all that holds in the panel. Once it is removed , it pulls out easily When the new panel arrived,just slide it up into the top grooove, and push the bottom strip back into its groove. The front looks like new!
Other Parts Used:
stephen from west islip, NY
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
24 of 28 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door panels and trim damaged by power wheelchair
I removed the four screws, two at the bottom and two at the top, of the lower access panel and removed the broken assembly. I removed the piece of rubber trim from the bottom of the door panel (unsnaps from it's channel). I pried off the damaged bright trim from the left side of the door, scraping off most of the glue residue with a knife and finally cleaning the rest with solvent. I cut the new piece of bright trim to fit with siscors and pressed it in place. I used the remainder of the new trim and a piece cut from the old damaged trim previously removed to trim the lower access panel. I carefully removed the insulation from the old access panel and installed it in the new access panel with double sided tape. I followed the instructions that came with the new panels and installed them in the door and access panels. I reinstalled the rubber trim in the bottom chanel of the door. I moved the other parts from the old access panel to the new access panel and reinstalled the new access panel assembly with the four screws removed earlier. Finished... I found other sites with the parts but ordered from PartSelect because your site made it easier to identify and select the right parts to order. My order shipped very quickly and everything arrived perfectly. I'm impressed. Thank you...
Washed the edges good and clean to remove old tape that was holding the old panels. Slid in the new ones and found that the retaining strip would not work without replacing the inner strip. I didn't want to order this $53 dollar plastic strip so I squeezed a couple of rubber pieces into the bottom of the side edges to hold the top panel. Placed the retaining strip in place and used a long strip of black duct tape at this bottom edge to hold it all. It works and the new panels make the dish washer look close to new,the black duct tape hardly shows. This works good for my 10+ year old dishwasher until it is replaced with one that has a better door design.
Pulled off the bottom trim, slid the old panel off and put the new panel on. Then popped back on the bottom trim.
Other Parts Used:
Luann from Springfield, MO
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door panel was damaged and the cover over the buttons was torn.
Label cover was glued on and you simply pull it off and replace it with the new one. That takes about 2 minutes! The front panel was dented and all you have to do is pull off the rubber trim on the bottom and replace the panel. The dishwasher looks new!!
Remodeling a house and front panel on dishwasher was bent and needed replaced. I just measured panel and ordered without a model or part number. Was so lucky the panel fit perfect.
Just took old panel off and went side to side and then slide panel under front trim. Of course it was easier because the bottom door trim was off and now I have to find that replacement part. Not having any luck with that!
Other Parts Used:
Sylvia from WHITESBURG, KY
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
changing a damaged door panel insert
I needed to cut 1/4inch off the panel and unscrew the side piece which held it in place.... insert the new piece and put back the 3 screws. Done!
Other Parts Used:
Constance from Sonoma, CA
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Color didn't match updated look
First I removed the the rubber sides. Then I slide the replacement panel over the exisiting one. That's it no other tools were needed. I didn't even break a sweat.
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Liz
April 26, 2018
What are the dimensions of this panel?
Hi Liz, Thank you for the question. Going by the 1 inch grid, the panel is measures approximately 23 1/2" X 19". Hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Lois
November 15, 2018
What door panel do i need for this model. My black panel is damaged.
For model number DU8500XB-0
Hello Lois, thank you for your question. The door panel insert for that unit is part number PS11741289. This is white on one side and black on the other. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Paul
April 8, 2018
Can i get a stainless steel insert for this model?
For model number 66515595792
Hi Paul,
Thank you for your question. Unfortunately this panel is only a reversible black and white. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Nancy
January 14, 2019
Is there a panel to replace the lower black panel (below the door) of the dishwasher? If so, what is the part number?
For model number DU900PCDB3
Hello Nancy, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is Part Number: PS11741275. Thank you for your inquiry, good luck with this repair!
I would like to change my color from black to white by changing the door panels. I can find a replacement for the door panel but can't seem to find a replacement for the bottom panel. Can you tell me if one is available.
For model number DU920QWDB3
Hello Suzanne, Thank you for the question. Very sorry but the Bottom Panel is only made in Black. For more specialized assistance or to speak with someone about this, I would suggest calling the manufacturer of the appliance directly. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Woody Patterson
February 14, 2020
Need black front door and control panel replacement for this Kenmore modal. Can’t seem to locate
For model number 665-1311 4k701
Hello Woody, thank you for your question. The control panel in black is PartSelect Number PS11748198
and the door panel in black is Part Number: PS3418314. I hope this helps.
Can't find my exact model number. Does this part fit my old dishwasher, model # above?Thank you!
For model number DU927GWDBO
Hello Nancy, thank you for your question. Yes, that part does fit the above model. I hope this helps.
Was this helpful?
Thank you for voting!
Becky
January 7, 2022
Does this panel fit my Kenmore with that model number 665744590
For model number 665744590
Hello Becky, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11741289. We hope this helps!
Was this helpful?
Thank you for voting!
Deb
January 21, 2023
I'm looking for a white door panel to fit my Kenmore Ultra Wash dishwasher, but this one is too small. Can you find the right one for me? Measurements are 30 x 23 1/2 Thanks!
For model number 665.1241
Hello Deb, thank you for your question. We find for your model a Stainless Steel Outer Door panel part PS12347595. We are pleased to have been able to help.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741289
Manufacturer Part Number: WP3369769
