Maytag/Maytag_Thumb/S2YMYQL4.gif
See part 12 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Agitator Cam Bearing

$12.67   Special Order

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 11026152500!
 Fits your 11026152500!
PartSelect Number PS11741241
Manufacturer Part Number WP3363661
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Will not agitate
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Kenmore, Maytag, KitchenAid.
Part# WP3363661 replaces these:
3363661
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

1 question answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Dan
April 25, 2019
We are house renters with an existing Maytag top load washer dom 2014. Now during certain rise times and during spin cycle the cycle starts with the tub banging around the side walls. The tubs gets going and balance out then on next cycle the startup bang begins again. There are no balance springs in this design.
For model number WVMC300BW1
Hello Dan, thank you for inquiring. For this symptom you will want to replace either the Washer Drive Pulley part PS10057144, the Thrust Spacer part PS334562, or the Drive Belt part PS11747978. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 4.2 / 5.0, 7 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Washer not agitating
On top of the agitator is a flat cap that is held in place by the friction of an o-ring, there are no fasteners. I would imagine one could get under the lip with a small screwdriver or butter knife to pop it off but I chose simply using my fingernails so as to not disfigure the cap. Under the cap you will find the head of the only bolt that holds the assembly together it is a 7/16 head and because it is in a 4" deep well your will need a 6" extension for your ratchet. Once the bolt is out the top of the agitator, the assembly with the cogs removes by hand. Set the assembly upside down on the counter, slide the black plastic ring off, pull the cogs out with your fingertips, install the new cogs put a new black ring on and set the assembly back in the agitator. Reinstall bolt. As the bolt is down in a tube, you cannot set it in place with your fingers and it will fall out of the socket. To hold the bolt in the socket during positioning you can either put a gob of Vaseline on the bolt head to hold it in the socket or form a small piece of paper over the bolt head and set it into the socket, the friction of the paper will hold the bolt into the socket. Took me less then 10 minutes, good luck
Other Parts Used:
Agitator Directional Cogs Thrust Spacer
  • Craig from Polk City, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
630 of 660 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitatorwouldn't agitate on the washing machine
before ordering the parts, I pulled the cap of the agitator, removed some internal parts of the agitator - had to remove one hex head bolt, and noticed the threads on the 3 little teenie weenie plastic dogs were worn off. I bought the repair kit on line after entering the model number, parts were here in a few days, and the repair took about 15 minutes. Works like new again.

The directions provided with the parts were very clear and made the job quick, easy, and painless.
Other Parts Used:
Agitator Repair Kit Thrust Spacer
  • Kelly from Newport News, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
26 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Top section of agitator not turning
Found directional gogs broken. Searched washer model # on PS.com and easily found schematic drawing. Received parts in a couple of days. Removed agitator with one nut, and other parts just pulled apart. Replaced the cogs and other parts which were not really broken....just worn. Everything went back together easily, and I was done! Parts Select saved me a LOT of time, and especially money, than if I had called a repair co. THANKS!
Other Parts Used:
Agitator Directional Cogs Washer Thrust Spacer
  • John from Stone Mountain, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
17 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Would not agitate
Exactly as shown in your video
Other Parts Used:
Seal, Inner Cap Agitator Directional Cogs Thrust Spacer
  • john from RAY CITY, GA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
2 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator directional cogs worn out
Removed bolt holding top of agitator, removed top of agitator. Replaced parts. Reinstalled agitator. An old machine now works like a new model.
Other Parts Used:
Agitator Directional Cogs Thrust Spacer
  • Do n from LAWTON, OK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The Agitator in my washing machine wasn't spinning, and was loose.
After researching and learning from the university of YouTube, I ordered new agitator 'dogs' from PartSelect - the rubbery dogs which look like gummy bears, were worn out in my machine and needed to be replaced. These dogs secure the inner part of the agitator. After watching several videos on YouTube, I knew precisely what to do and what I needed. I researched and found PartSelect on-line and they were very helpful and sending me the dogs. It was a very simple fix, and my washing machine now is working like brand new. Thanks PartSelect for all your help and will reach out again for any future self-fix projects!!
Other Parts Used:
Agitator Directional Cogs
  • Anton from BRONX, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Agitator failure
Diagnosing the problem took a couple of hours, because the fabric softener dispenser was so full; I tried to pry it apart but to do that I had to destroy it!:-) While I was cleaning the place for the dispenser I decided to take off the cover, clean out everything - then ordered the parts. Once the parts arrived I watched the video for assembly ... and the rest was easy.
Other Parts Used:
Seal, Inner Cap Agitator Directional Cogs Fabric Softener Dispenser
  • Joseph from Equinunk, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741241
Manufacturer Part Number: WP3363661
Brand
Model Number
Description
Kenmore
11010202000
Washer
Kenmore
11010202001
Washer
Kenmore
1101050299
Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
Kenmore
11010502990
Washer
Kenmore
11010502991
Washer
Kenmore
11010852990
Washer
Kenmore
11010852991
Washer
Kenmore
11012202100
Washer
Kenmore
11012502100
Washer
Kenmore
11012852100
Washer
Kenmore
11014502300
Washer
Kenmore
11014852300
Washer
Kenmore
11016512690
Washer
Kenmore
11016512691
Washer
Kenmore
11016512692
Washer
Kenmore
11016602690
Washer
Kenmore
11016602691
Washer
Kenmore
11016602692
Washer
Kenmore
11016602693
Washer
Kenmore
11016611690
Washer
Kenmore
11016611691
Washer
Kenmore
11016611692
Washer
Kenmore
11016612690
Washer
Kenmore
11016612691
Washer
Kenmore
11016612692
Washer
Kenmore
11016812500
Washer
Kenmore
11016812501
Washer
Kenmore
11016812502
Washer
Kenmore
11016812503
Washer
Kenmore
11016872690
Washer

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service