Maytag/Maytag_Thumb/S2YMYQL4.gif
See part 12 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Agitator Cam Bearing

$11.07   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11741241
Manufacturer Part Number WP3363661
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Will not agitate
This part works with the following products:
Washer.
This part works with the following products:
Whirlpool, Kenmore, Maytag, KitchenAid.
Part# WP3363661 replaces these:
3363661
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Dan
    April 25, 2019
    We are house renters with an existing Maytag top load washer dom 2014. Now during certain rise times and during spin cycle the cycle starts with the tub banging around the side walls. The tubs gets going and balance out then on next cycle the startup bang begins again. There are no balance springs in this design.
    For model number WVMC300BW1
    Hello Dan, thank you for inquiring. For this symptom you will want to replace either the Washer Drive Pulley part PS10057144, the Thrust Spacer part PS334562, or the Drive Belt part PS11747978. We hope this helps.

    1 person found this helpful.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 4.2 / 5.0, 5 reviews. What's this?
        Sort by:
        Sorry, we couldn't find any existing installation instruction that matched.
        Washer not agitating
        On top of the agitator is a flat cap that is held in place by the friction of an o-ring, there are no fasteners. I would imagine one could get under the lip with a small screwdriver or butter knife to pop it off but I chose simply using my fingernails so as to not disfigure the cap. Under the cap you will find the head of the only bolt that holds the assembly together it is a 7/16 head and because it is in a 4" deep well your will need a 6" extension for your ratchet. Once the bolt is out the top of the agitator, the assembly with the cogs removes by hand. Set the assembly upside down on the counter, slide the black plastic ring off, pull the cogs out with your fingertips, install the new cogs put a new black ring on and set the assembly back in the agitator. Reinstall bolt. As the bolt is down in a tube, you cannot set it in place with your fingers and it will fall out of the socket. To hold the bolt in the socket during positioning you can either put a gob of Vaseline on the bolt head to hold it in the socket or form a small piece of paper over the bolt head and set it into the socket, the friction of the paper will hold the bolt into the socket. Took me less then 10 minutes, good luck
        • Craig from Polk City, FL
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          Less than 15 mins
        • Tools:
          Socket set
        • Parts Used:
          80040, WP3363661, 285587
        615 of 642 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Agitatorwouldn't agitate on the washing machine
        before ordering the parts, I pulled the cap of the agitator, removed some internal parts of the agitator - had to remove one hex head bolt, and noticed the threads on the 3 little teenie weenie plastic dogs were worn off. I bought the repair kit on line after entering the model number, parts were here in a few days, and the repair took about 15 minutes. Works like new again.

        The directions provided with the parts were very clear and made the job quick, easy, and painless.
        • Kelly from Newport News, VA
        • Difficulty Level:
          Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Socket set
        • Parts Used:
          WP3363661, 285811, 285587
        25 of 26 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Top section of agitator not turning
        Found directional gogs broken. Searched washer model # on PS.com and easily found schematic drawing. Received parts in a couple of days. Removed agitator with one nut, and other parts just pulled apart. Replaced the cogs and other parts which were not really broken....just worn. Everything went back together easily, and I was done! Parts Select saved me a LOT of time, and especially money, than if I had called a repair co. THANKS!
        • John from Stone Mountain, GA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Socket set
        • Parts Used:
          80040, WP3949550, WP3363661, 285587
        16 of 18 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Would not agitate
        Exactly as shown in your video
        1 person found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
        Agitator failure
        Diagnosing the problem took a couple of hours, because the fabric softener dispenser was so full; I tried to pry it apart but to do that I had to destroy it!:-) While I was cleaning the place for the dispenser I decided to take off the cover, clean out everything - then ordered the parts. Once the parts arrived I watched the video for assembly ... and the rest was easy.
        • Joseph from Equinunk, PA
        • Difficulty Level:
          Really Easy
        • Total Repair Time:
          15 - 30 mins
        • Tools:
          Nutdriver
        • Parts Used:
          WPW10072840, 80040, 63580, WP3363661
        0 of 3 people found this instruction helpful.
        Was this instruction helpful to you?
        Thank you for voting!
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11741241
          Manufacturer Part Number: WP3363661
          Brand
          Model Number
          Description
          Kenmore
          11010202000
          Washer
          Kenmore
          11010202001
          Washer
          Kenmore
          1101050299
          Washer - Kenmore Washing Machine Model 110.1050299 (1101050299, 110 1050299) Parts
          Kenmore
          11010502990
          Washer
          Kenmore
          11010502991
          Washer
          Kenmore
          11010852990
          Washer
          Kenmore
          11010852991
          Washer
          Kenmore
          11012202100
          Washer
          Kenmore
          11012502100
          Washer
          Kenmore
          11012852100
          Washer
          Kenmore
          11014502300
          Washer
          Kenmore
          11014852300
          Washer
          Kenmore
          11016512690
          Washer
          Kenmore
          11016512691
          Washer
          Kenmore
          11016512692
          Washer
          Kenmore
          11016602690
          Washer
          Kenmore
          11016602691
          Washer
          Kenmore
          11016602692
          Washer
          Kenmore
          11016602693
          Washer
          Kenmore
          11016611690
          Washer
          Kenmore
          11016611691
          Washer
          Kenmore
          11016611692
          Washer
          Kenmore
          11016612690
          Washer
          Kenmore
          11016612691
          Washer
          Kenmore
          11016612692
          Washer
          Kenmore
          11016812500
          Washer
          Kenmore
          11016812501
          Washer
          Kenmore
          11016812502
          Washer
          Kenmore
          11016812503
          Washer
          Kenmore
          11016872690
          Washer

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service