This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Dryer.
This part works with the following products:
Maytag.
Part# WP33001624 replaces these:
AP6007930, 33001624
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
1.0
Filter By Rating:
5 Stars
0
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
1
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Douglas S - April 11, 2019
Verified Purchase
Timer for dryer
Unfortunately we installed the part and still no change in the problem. Have no choice but to return. Parts Select are great though and we have ordered other items that fixed our problem with the dryer and delivery time is fast, very fast.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Timer did not advance
Follow you tube instuctions
Other Parts Used:
Ron from FLORISSANT, MO
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joe
January 24, 2018
With the timer positioned to begin, the start button is pressed and nothing happens. There is no movement or indication that the Maytag gas dryer will begin. When the timer is turned manually back to its off position and i once again press the start button, there is a "buzzing" sound at the start button position. At first, i thought that the problem may have been in the starter button, but then the sound makes me think that its actually working and the problem may lie elsewhere. If you think that it actually is the start button, i might try replacing it because it's a relatively inexpensive item. But i'm suspecting the timer may be the culprit, so i removed the timer but need help in determining if there is any way to check its internal circuitry to be sure that its actually at fault. I do have a volt/ohm tester, but not sure what to do. (the door switch is not the problem, i fixed that by taping the shut off switch to be permanently closed).
For model number MDG9206aww
Hello Joe, thank you for your question. I would recommend testing both the timer and the start switch. There is information on how to test these parts at the following link: https://www.partselect.com/Repair/Dryer/Will-Not-Start/ . This should help diagnose the issue. If you can't determine with certainty, I would recommend replacing the start switch first. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Julius
January 28, 2018
When using the autodry selection the drier will never shutoff. It will continue until dor is opened. When using the air fluff option it works properly but doesn't dry properly. When using the last setting it does the same as the first.
For model number Maytag MDG906aww
Hello Julius, thank you for your question. There are a few parts I would check to determine what the issue is with this appliance. I would check the gas coils, Radiant Flame Sensor, timer, and thermostats of the unit. These can all be tested using an ohmmeter. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Michel
September 18, 2022
Since over a year, we have difficulties to start dryer when pulling the knobs to start it. We need to pull out many times before it start and it's getting more and more difficult. Do i need to change the timer ??
For model number mde6400azw
Hi Michel, thank you for contacting us. You will need to check the knob for any physical damage. If it rotates freely or looks damaged, you will need to replace the knob, part number PS11739486. After that, you will need to check the timer switch, part number PS11741133. Check the timer switch using a multimeter for continuity. Please submit a new question if you have any follow-ups.
Could the timer be the problem? Burner lights for a couple minutes, then goes out. Replaced coils and checked the other components, everything else checked good. Thank you
For model number MGD9206BWW
Hi Gary, thank you for asking. Since you have checked the other parts and they all checked fine, we would recommend checking the timer, part number PS11741057, to fix the issue. This dryer timer is used to control the unit's cycles by regulating the length of time that power is directed to each setting. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
