Part Location Diagram of WP33001003 Whirlpool Lint Filter
See part 10 in the diagram
Replacing your Maytag Dryer Lint Filter
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Lint Filter

 Fits your LSE7806ACE!
★★★★★
★★★★★
43 Reviews
$47.45
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your LSE7806ACE!
PartSelect Number PS11741039
Manufacturer Part Number WP33001003
Manufactured by Whirlpool
Product Description

Lint Filter Specifications

This lint filter screen is slide in styl type of Maytag filter screen. It is most typically used for the 08 and later series of Maytag gas or electric clothes dryers that appear before 1990.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Dryer Lint Filter

Replacing your Maytag Dryer Lint Filter
Troubleshooting
This part fixes the following symptoms:
Noisy
This part works with the following products:
Dryer, Washer Dryer Combo.
This part works with the following products:
Maytag, Jenn-Air.
Part# WP33001003 replaces these:
AP6007914, 3-4384, 3-4388, 3-6665, 3-6666, 304384, 304388, 306665, 306666, 33001003, WP33001003VP, Y304384, Y304388, Y306665, Y306666
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
43 Reviews
4.8
Filter By Rating:
  • 5 Stars
    35
  • 4 Stars
    7
  • 3 Stars
    1
  • 2 Stars
    0
  • 1 Star
    0
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2
  • 3
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 64 reviews. What's this?
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
electric dryer was rumbling - wheel or belt?
Unplugged dryer. Front came off easily. Removed front of blower. Wheel came off fairly easily - could then see that shaft of motor was circular with flattened side but inside of old wheel was rounded. New wheel popped right on. Took tumbler off so I could clean lint out more easily and get a good view of how the belt threaded through. Put the tumbler back on and reached back with both hands to thread it. Took a half dozen tries until I was sure it was seated correctly and not twisted. Put front... of dryer back on. So far (a week or so) the rumble is gone. Seems blower wheel was the cause of the rumble. Belt didn't seem worn but replaced anyhow.
Other Parts Used:
Tumbler and Motor Belt Blower Wheel with Clamp
  • Raymond from West Bend, WI
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set, Wrench (Adjustable)
598 of 705 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
no heat
Couldn't figure out how to dismantle the dryer to get to the heater and housing assembly. Found it on your website others commenting about where to locate the 2 front screws.....after that it was easy as a piece of cake. We took it apart and installation done in 15mins. Now I hope my Maytag dryer will last another 30years....LOL
Other Parts Used:
Complete Heater and Housing Assembly - 240V
  • Helen from Granbury, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
489 of 491 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Maytag dryer is 33 years old and needed a new lint filter.
The dryer was so old (33 years) that the customer service woman could not find the model number. However, she gave me the oldest Maytag model lint filter number she had and she had me compare online a parts drawing of it with mine. It looked so similar that I took a chance and ordered it. And it fits perfectly. She gave me excellent customer service. I regret that I did not record her name.
Other Parts Used:
  • Diane from York, ME
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
378 of 382 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Lint filter ripped
I took out the old lint filter...and slipped the new one in. Pefect fit.
Other Parts Used:
  • Joni from Auberry, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
100 of 163 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Filter was old and ripped
Just placed the new filter in place. Fit fine and works well.
Other Parts Used:
  • Maurine from Bloomer, WI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
73 of 134 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
damaged filter
replace it
Other Parts Used:
  • Jaime from Miami, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
72 of 72 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noise, possible low exhaust flow
1 Disconnect dryer from electrical outlet
2 remove vent pipe
3 Tilt dryer backwards and remove front cover bottom 2 philips screws.
4 remove lint assembly and then the fan blower housing with nut driver.
5 with pliers remove retainer clip from fan
6 remove snap ring with pliers or a flat blade screw driver will also work.
7 remove fan
at the same time I replaced the front glides if you do not want to do this then reinstall in reverse order and job is complete.

for glide replacement
1 remove the 4 screws holding the outer ring to the frame of the dryer.
2 drill out old rivits from the back side and then knock out. be careful to only drill rivit and not into metal frame
3 install new new glides makesure you install in correct direction.
4 install pop rivets with stud end on top side of glide. pushing rivet through glide and into the frame ring.
5 pop rivits and make sure they are secure.
6 reinstall ring making sure seal is around ring correctly
7 reintal 4 screws.
8 follow reassembly of blower and lint housing if you changed the fan. if not then just the lint assembly.

good luck the job is really easy and you will save yourself some money
Other Parts Used:
Blower Wheel with Clamp Front Glide Kit
  • Joseph from Demotte, IN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Pliers, Screw drivers
69 of 133 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
holes in lint filter
first i removed old filter, put into plastic bag. Removed new filter, and slipped into dryer. This dryer is old, but works great, and now will work even better because she has a new filter.
Other Parts Used:
Broiler Pan - Small
  • Christine from Kingsford, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
19 of 617 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
heating element brunt out after 25 years!!
you must remove the element tube from from the dryer,{ mark all wires prior to },lay the unit on a bench,remove two screws-open the tube like a big book. then take a pencel and follow the element as it goes through the insulators. remove the two screws on both ends of the element & remove. to reinstall-reverse procedure-make sure to the element very snug-the instruction sheet is very good!!
Other Parts Used:
Heater Element - 240V Blower Wheel with Clamp
  • leroy from putnam, CT
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
12 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
black marks on whites and dark
The repair went better then I thought it would go.
the seals went on just fine
Other Parts Used:
Tumbler and Motor Belt Dryer Blower Housing Seal Front or Rear Drum Felt Seal Front Glide Kit
  • ROBERT from MORGAN CITY, LA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Socket set, Wrench set
9 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
  • 3
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

31 questions answered by our experts.
  • 1
  • 2
  • 3
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mary
October 23, 2017
Will this work on the series 7 model?
For model number DE312
PartSelect logo
Hi Mary, Thank you for your inquiry. Yes this part will work on your appliance. I hope this helps. Thank you and have a great day!

10 people found this helpful.

Was this helpful?
Thank you for voting!
Christina
December 6, 2019
Will the lint trap fit my Maytag dryer? Model # de410 serial # 285781 gt
For model number DE410
PartSelect logo
Hi Christina, this filter is fully compatible with model de410. Thank you for your question and good luck with your repair!

4 people found this helpful.

Was this helpful?
Thank you for voting!
Daniel
March 17, 2020
Hi. Will this filter fit my Maytag dryer model: Lde303 series: 07 serial#: 300389 xj?
For model number LDE 303
PartSelect logo
Hello Daniel, thank you for your inquiry. PartSelect number PS11741039 shows as being the correct lint filter for your appliance. We hope this helps.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Donald
February 18, 2020
Hello, will this lint filter be suitable for my Maytag gas dryer series 5? Thank you. Also, will there be a gap space after putting the lint filter in position. My current filter has a gap space on top which allows lint to bypass the filter?
For model number DG303
PartSelect logo
Hello Donald, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number: PS11741039. This filter will fit the same as the original. We hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Susan
August 21, 2019
Will this filter fit this Maytag year 2001? Thanks!
For model number LSE7806ACQ
PartSelect logo
Hi Susan, this will fit the model LSE7806ACQ, if you have a different model we would need your model number to make sure. Thank you for your question and good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Michelle
November 21, 2017
Will lint filter ps11741039 work on my Maytag dryer model de412?
For model number DE412
PartSelect logo
Hi Michelle, Thank you for the question. Yes the filter PS1171039 is listed as a match for the model number provided. Good luck with the repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Douglas
December 6, 2022
I have a 35 year old Maytag stackable washer/dryer, with model 747G dryer. Does this lint screen fit this model dryer?
For model number SE1000
PartSelect logo
Hello Douglas, thank you for writing. Yes, the Lint Filter PS11741039 you had chosen is compatible with your model. Please feel free to give us a call. We look forward to hearing from you.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Jan
February 1, 2023
Is this lint filter the correct one for my model?
For model number LDE76000
PartSelect logo
Hello Jan, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11741140. We hope this is helpful!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Marisol
February 28, 2023
Is this lint filter the correct one for my model number? Thanks.
For model number DG212
PartSelect logo
Hello Marisol, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11741039. We hope this information is useful!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Cecilia
June 21, 2023
Hello, Can you please help to confirm which model of lint filter is compatible for Maytag washer/dryer LSE7800ADE. Thank you!
For model number LSE7800ADE
PartSelect logo
Hi Cecilia, thank you for contacting us. The lint filter you mentioned, part number PS11741039, is compatible with your model. We hope that helps!

1 person found this helpful.

Was this helpful?
Thank you for voting!
  • 1
  • 2
  • 3
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11741039
Manufacturer Part Number: WP33001003
Brand
Model Number
Description
Maytag
DE106
Dryer - Electric
Maytag
DE107
Dryer - Electric
Maytag
DE110
Dryer - Electric
Maytag
DE180
Dryer - Maytag Dryer Model DE180 Parts
Maytag
DE18CA
Dryer - Electric
Maytag
DE18CM
Dryer - Electric
Maytag
DE18CS
Dryer - Electric
Maytag
DE18CT
Dryer - Electric
Maytag
DE19CA
Dryer - Electric
Maytag
DE19CD
Dryer - Electric
Maytag
DE19CS
Dryer - Electric
Maytag
DE19CT
Dryer - Electric
Maytag
DE210
Dryer - Electric
Maytag
DE212
Dryer - Residential
Maytag
DE21CM
Dryer - Electric
Maytag
DE21CT
Dryer - Electric
Maytag
DE22CA
Dryer - Electric
Maytag
DE22CS
Dryer - Electric
Maytag
DE22CT
Dryer - Electric
Maytag
DE23CD
Dryer - Electric
Maytag
DE24CA
Dryer - Electric
Maytag
DE24CM
Dryer - Electric
Maytag
DE24CS
Dryer - Electric
Maytag
DE24CT
Dryer - Electric
Maytag
DE25CS
Dryer - Electric
Maytag
DE303
Dryer - Residential
Maytag
DE308
Dryer - Electric
Maytag
DE309
Dryer - Electric
Maytag
DE312
Dryer - Residential
Maytag
DE313
Dryer - Residential
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service