Spring Latch

I unscrewed the spring latch (I could not find a screw driver- so I used a butter knife) I took the new one and screwed it on........the total time took about 2 minutes!
The best news was that the parts were delivered in 2 days after ordering!!!!!!!!! Amazing!!!!!!!!!!

Easy off-easy on! Parts were exactly what I needed.

checked online for the part name, called and ordered the spring latch. It came in a couple days and works fine. Many thanks.

As I was using my mixer the spring clip broke off. I immediately went to my computer and googled you. Twenty-four hours later the part had arrived and I installed it by removing two screws, holding the spring in place and replacing the screws. At the same time a repairman was in our home repairing our drier and I felt so empowered by my repairmanship that I nearly asked him to leave!
Thanks for your extreme promptness and readable parts chart.

Two flat head screws removed, swapped out the latch, and replaced.
The entire repair took about two minutes.
Price was acceptable given the worth of the mixer.

I screwed the two screws into the place of original holes and Voila! it was repaired.

removed old screws and latch, replaced it with the new. took just a few seconds. This is the first time i ever fixed anything. customer service was amazing

Removed the two screws that hold the bowl spring in place. Removed broken spring. Replaced broken spring with replacement spring. Tightened two screws that hold it in place.

SO SIMPLE!!!!! Using a regular screwdriver, remove the remains of the Spring Latch. Place new one over holes and screw new one in place using the currently used screws. May wash off screws first if caked with gunk. OMG!!! TOOOO easy and saved me from throwing out a very terrific 40 year old PRO LINE KITCHEN AID MIXER!! To replace it would have been hundreds of dollars.

Unscrew the broken latch; remove it; screw in the new latch. Very, very, very easy to do.