Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Brian W - February 21, 2025
Verified Purchase
Works good
My appliance is back up and working
★★★★★
★★★★★
Brian W - December 23, 2020
Verified Purchase
Part was great
Proper fit and operation
★★★★★
★★★★★
Sharon C - November 3, 2023
Verified Purchase
Easy repair
The part came within a few days and it was an easy fix with the right part. Sure beats waiting for a repairman to come in
★★★★★
★★★★★
Rick N - September 4, 2023
Verified Purchase
Exactly the right part I needed
The part came quickly. Not even a week to get it and I'm in northern Alberta. The part fit perfectly was an easy to install using minimal tools. I will use part select again. It was easy to look up the part with just the model number of the stove
★★★★★
★★★★★
Jeff S - July 13, 2023
Verified Purchase
Awesome part! Great parts company. Thanks
Super fast shipping. Great product.
★★★★★
★★★★★
Kiff C - September 3, 2020
Verified Purchase
Whirlpool Range Infinite Control Switch
The part delivered in good shape and fast. Install is easy and the range is back to normal now.
★★★★★
★★★★★
David G - July 15, 2021
Verified Purchase
Great product
Fast delivery, good Products easy fit
★★★★★
★★★★★
Basil H - July 18, 2021
Verified Purchase
I ordered wrong part
Part came quickly but was the wrong Part.
★★★★★
★★★★★
Robert N - April 9, 2021
Verified Purchase
Good part, slow delivery
original part was discoloured and I requested another one. It came within a few days and it appeared to be new, was easy to install and works well. Delivery of the original part took over a month.
★★★★★
★★★★★
Murray K - July 14, 2020
Verified Purchase
Wrong switch
The diagram only shows one switch, there is a smaller switch that burns front element .. diagram does not show that part for some reason.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 7 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The old switch broke off.
Removed two screws that held the unit in then pulled out a few inches so I could see where the 5 wires were. Then I replaced one at a time till done. then replaced the retaining screws.
Other Parts Used:
Bruce from Pasadena, MD
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
33 of 43 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner was not heating up
Puled out the electical plug . Removed the back panel. Pulled off the switch knob. Removed the 2 screws holding the switch. Took the wires off of the old switch and placed them on the corespondig connector on the new switch. Put everything back in reverse order.
Other Parts Used:
Gary from Hellertown, PA
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
30 of 45 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Burner would randomly overheat on any setting (Bad Control Switch)
1) Unplug stove. 2) Remove back cover of the stove held in place by 8 screws (4 short ones for the upper holes and 4 longer ones for the lower holes.). 3) Remove the knob from the switch that you are replacing to expose the switch mounting screws (2 screws). 4) Remove the screws. 5) Go to the rear of the stove and extract the defective switch. 6) You will see 2 plastic plugs going into/onto the switch. Remove the plugs. MAKE SURE YOU ARE UNPLUGGED FROM THE Wall OUTLET!! A small flat blade may be needed to separate the plugs from switch. 7) Attach the plugs to the new switch (there is only one way to do it. you wont get them confused and put on wrong. 8) Put the new switch where the defective one was. 9) Come to the front of the stove and put your two screws in and replace the knob. 10) Replace the back cover, 11) Plug in and test burner.
Unscrewed the switches and let the switch hang while replacing one wire at a time. Followed instructions on wire replacement. Exact parts, only shaft on 6" switch was too long -- okay, because it is designed to break off a piece on end of shaft, then the knob fit. Everything was perfect.
Pulled range out from wall, unplugged AC, unplugged infinite switch, plugged in new switch, broke off end of stem, plugged AC in put range back and tested.
Watched video & did just guy in video did. Very easy job & the burner works like new.
Other Parts Used:
LOUIS C from GRAND JCT, CO
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
cooktop on the rt side would just keep getting hot
Removed the ifinite controlswitch and replaced it but i dont believe it is wired correctly. now it wont get hot until it is set on four or so. think i the way it is wired.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
43 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kee
September 9, 2017
One of the small burners on the ceramic cook top goes to high heat when the control is on low (2-3). Is the temp sensor part of the control switch?
For model number RF368LXPB
Hello Kee, thank you for contacting us. That would be a faulty switch causing the burner to heat up like that on low. Replacing this would fix the issue. Good luck with the repair!
16 people found this helpful.
Was this helpful?
Thank you for voting!
Glenda
May 27, 2019
Front burner(10 inch) only works on high. Is ps1170785 the correct part number and does each burner have a different part number?
For model number WFE525C0BS0
Hello Glenda, thank you for your question. The Right front switch is PartSelect Number PS11740783, and the left front switch is PartSelect Number PS11754687. Each burner uses a different switch. I hope this helps!
10 people found this helpful.
Was this helpful?
Thank you for voting!
Marsha
November 8, 2019
What does the infinite switch do....how does it work on stove? i have Whirlpool accu bake self cleaning...rf380lxmq0.
Hello Marsha, thank you for your question. The infinite control switch is what controls the heat for the top burner element. You turn the knob to desired setting and this regulates the element heat. I hope this helps!
5 people found this helpful.
Was this helpful?
Thank you for voting!
Kerry
December 31, 2017
The left front dual burner goes to high heat when knob is turned to low?
For model number GR440LXMB
Hello Kerry, Thank you for your inquiry. I would test both the burner and the switch with a multimeter to see if they have continuity. If you are unfamiliar with how a multimeter functions, there are YouTube videos available to assist you. Hope this helps!
3 people found this helpful.
Was this helpful?
Thank you for voting!
John
January 15, 2018
I have a 4 burner Whirlpool electric range/oven. The back left burner (vent pipe in the center of the burner) is not working. When i turn the dial, the hot surface light goes on but nothing else happens. I replaced the receptacle but the problem persists. So, when i turn the burner on, power goes to the light but power does not go to the burner. Do i need a new element switch? Something else i should check? Thanks.
Hi John,
Thank you for your question. There are really two main parts that could cause this issue. It could be either your switch or the element itself. I would suggest checking your element first with a multi meter. When testing it remove it from the appliance, it should ready between 1000 - 1100 ohms. When testing your switch make sure to remove it from the appliance and turn the switch on as you are testing it, if your meter does not change at all from the neutral position/number, then it is broken and will need to be replaced. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Terry
July 20, 2017
Do the two little screws come with this switch.
For model number RF302BXYW
Hi Terry, great question. This control switch does not come with the screws, you should be able to use the existing screws to install your new switch. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Andrew
December 1, 2017
I need to replace a switch for the stove small element that its not heating. I found these two and one says its for the 6" and I need it for the small element . Ps11747215 and ps11747215
For model number GR563LXSS
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is Part Number: PS11740785. The other options are for the dual element and the large element. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Kevin
October 1, 2019
What is part number for infinite switch for left front ? How to know this match my stove? And picture? I took photo of my, and want to compare to avoid buying a wrong one . Thanks
For model number Ygfe461lvs0
Hello Kevin, thank you for your question. The front left, dual element switch for that specific model is PartSelect Number PS11749068. We verify the part is correct by using the model number to find the exact replacement parts list. Please enter the part number into the site for current price and availability. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
David
October 5, 2023
The front right element control seems to not function correctly, either on with no heat below medium, you turn it up to medium and the element gets so hot it burns everything. There does not appear to be a middle setting point.
For model number YWFE515SOEWO
Hi David, thank you for the question. Based on the description you have provided, it seems that there is an issue with the infinite control switch, part number PS11740783. It turns the surface element on and off and controls how much heat the element produces. You may need to replace it to fix the issue. We hope this will resolve your problem!
The left front burner of my dual burner Whirlpool accu bake self cleaning oven does not work properly. Both burners work as they should, but.......neither one will go to a lower temperature when i turn it (big or small) down. does the infinite switch control this?
For model number RF380LXMQ0
Hello Marsha, thank you for your question. yes, the infinite switches control the burners. We would recommend replacing the Left front infinite switch PartSelect Number PS11740783. I hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11740785
Manufacturer Part Number: WP3149404
