Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Norman K - December 17, 2020
Verified Purchase
Exact and easy to instal.
Delivered on time and perfect match.
★★★★★
★★★★★
Bill B - November 8, 2020
Verified Purchase
Disconnect power switch works great oem...
part arrived fast, best price on net and oem. great place to buy.
★★★★★
★★★★★
Bob M - February 24, 2022
Verified Purchase
Worked!
Shipping through Purolator took about 10 days, a bit long, but the part was packaged well and worked.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.6 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Switch went bad
Our unit is a built-in unit so first had to remove the decorative cover panel to expose the internal on/off switch. Turned off the circuit breaker. Disconnected the wires (simple pull-off/push-on). Removed the old switch which meant clipping the plastic tabs holding the switch in position. Inserted the new switch by simply pushing it through the opening being sure to have it in the same alignment ('off' to the back of the unit.) Reconnected the wires making sure to have a white ground wires on the left and the black 'hot' wires on the right. Turned the circuit breaker back on. Turned the switch on. Now it runs.
Other Parts Used:
Roy from Ann Arbor, MI
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Pliers
12 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
switch burnt out
Unpluged the refrigerator, removed the burnt out switch by unpluging it, plugged the new one in re installed the switch into cover. Plugged in refrigerator replaced cover. Done. Easy as one two three
Other Parts Used:
Robert from Richmond, TX
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
5 of 8 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No power to the refrigerator.
Local service person missed the diagnosis and advised $10,000 new refrigerator. I looked and saw that the switch was deformed and had burn marks. Searched for switch online. Found site Ordered. Part arrived next day. 5 minute job to replace. No tools needed. Refrigerator works great. Thank you t!
Other Parts Used:
Kirby from DUBUQUE, IA
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
4 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Mark
January 31, 2019
I purchased part number wp2266802 rocker arm switch. Does the switch come out the front? The new switch has metal clips.
For model number KSSS42MDX03
Hi Mark, thank you for your question. Yes it would. We actually do have a helpful piece of information from one of our customers about installation: "Our unit is a built-in unit so first had to remove the decorative cover panel to expose the internal on/off switch. Turned off the circuit breaker. Disconnected the wires (simple pull-off/push-on). Removed the old switch which meant clipping the plastic tabs holding the switch in position. Inserted the new switch by simply pushing it through the opening being sure to have it in the same alignment ('off' to the back of the unit.) Reconnected the wires making sure to have a white ground wires on the left and the black 'hot' wires on the right. Turned the circuit breaker back on. Turned the switch on. Now it runs." Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jay
January 14, 2020
My on-off switch burnt out and the wires are not connected to the switch I need to know where the wires go on the new switch?
Hi Jay,
Thank you for your question. To reconnect the wires make sure to have a white ground wires connected on the left side and the black hot wires on the right side. We hope this helps. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Aileen
July 15, 2021
Do both wires connect to the back prongs?
For model number KBLC36MHS01
Hello Aileen, Thank you for the question. You will need to connected the white ground wires on the left and the black 'hot' wires on the right. We hope this helps!
Was this helpful?
Thank you for voting!
Jackie
September 6, 2019
Does this switch control all power to the unit including control panel? Heard clicking sound. Already replaced capacitor and its adjacent part. Found broken wire in harness. Fixed by electronic guy. Now we have no lights on control panel and no clicking sound, nothing. All house electrical working fine. Does the unit have a reset button somewhere? Help!!
For model number KDDA27TRS00
Hi Jackie, The Power On/Off Switch located behind the base grille does control the control panel. Thank you for your question and good luck with your repair!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11740011
Manufacturer Part Number: WP2266802
