Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
July 3, 2019
Manufacturer part number WP2255431W. Is this part still available?
For model number 106.58172703 Kenmore
Hi Gary,
Thank you for your question. Yes, this part is still available if you would like to order it. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
July 3, 2019
Part # ps11739903 white. There is a left lever and a right lever. Do they come as a pair or do i need to order them separately. Cannot see where it says a left or a right, and there is a left and a right lever. One side is of the lever is straight.
For model number 106.58172703
Hello Gary, thank you for inquiring. The lever on the left is the Ice Dispenser Lever, part PS11739901 in white and part PS11739900 in black. The lever on the right is the Water Dispenser Lever, part PS11739905 in white and part PS11739903 in black. We hope this answers your question.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Eric
January 19, 2018
How do I remove and re-install my new ice dispenser lever?
For model number ED2FHEXMQ00
Hello Eric,
Thanks for your question. Unplug the fridge before doing any work on it. Remove the front cover of the dispenser by removing the locking tabs with a putty knife with tape at the end. Put the knife up and under the cover to release the tabs. Lift up on it to remove the panel. There is a wiring harness
you can then remove via a clip. With the front cover off, remove the smaller panel by unscrewing
the Phillips screws. You may want some tape to tape the small panel out of the way. Remove a screw holding down the right-side arm of the lever. Lift the arm and pull it out. Pull the pin out of the left side of the door, then use a screwdriver to help flex the arm out. Reach up and disconnect the black barrel held in place via tension, then put it through the arm. Reverse this process to install the new part, and put the plastic piece on the new part from the old one.
I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Gary
July 3, 2019
Part # ps11739903 is this part still available, and if so how does one go about ordering a left and a right lever. I can't seem to locate any instruction as to which one two order.
For model number 106.58172703
Hi Gary, Thank you for your question. The stock status for parts is always listed below the Add to Cart button on our site underneath the part information that you will see above the question and answer section. If you are not sure what a stock status means, you can click on it and a separate window will appear with the explanation for what that status means. When you search that part number that you have on our site it will take you to the part. I have also linked it below for you. I hope that helps. Good luck with your repair.
This is a genuine Whirlpool dispenser overflow grille for your refrigerator. This part is made of plastic and snaps in under the water and ice dispensers on your refrigerator door. Its function is to catch drips and spil...
