Part Location Diagram of WP2203266 Whirlpool Light Cover Lens
See part 34 in the diagram
Replacing your Whirlpool Refrigerator Light Cover Lens
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

Light Cover Lens

$64.61
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11739581
Manufacturer Part Number WP2203266
Manufactured by Whirlpool
Product Description

Light Cover Lens Specifications

This part covers your light bulb.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Whirlpool Refrigerator Light Cover Lens

Replacing your Whirlpool Refrigerator Light Cover Lens
Troubleshooting
This part works with the following products:
Refrigerator.
This part works with the following products:
Whirlpool, KitchenAid, Kenmore, Roper.
Part# WP2203266 replaces these:
AP6006506, 2203266
Back to Top
Customer Repair Stories
 Average Repair Rating: 4.4 / 5.0, 5 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The piece that covered the light at the back of the fridge burnt a hole in the cover.
First I removed the cover...and then I slid the new piece in. It looks great and so easy a caveman could do it...lol
Other Parts Used:
  • Jennifer from Islandia, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
11 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Fridge door would not close properly and therefore was letting cold air out and wasting energy
Removed lower door hinge and allowed door to drop down and off of upper hinge. Replaced cams on both hinge and on bottom of door. Reinstalled door. Also installed light cover that had broken years ago, but this is a pop-in item and no-brainer.
Other Parts Used:
Door Closing Cam Kit
  • Frederick from HoHoKus, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Socket set
5 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Light lense tabs broken off . Lense was too close to light bulb which melted lense.
Removed old lense and spapped new one in place. This will break again because lense is to short and the tabs holding it into the sides of the refrigerator are barely long enough.
Other Parts Used:
  • Glenn from Cross River, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noisy Belt/Slipping Intermittantly
Unplug dryer. Remove lower and upper front panels [remove wires from upper right door switch]. Lift up on belt idle pulley and take belt off pulley/motor. Remove front bulkhead and dryer lint/vent ducting. Note position on drum and remove belt. Unbolt top panel front 2 screws to allow room to remove drum. Remove drum. Take lock rings off drum support rollers and remove old rollers. Clean roller shafts and apply hi-temp grease [I used ultra hi temp brake grease-ceramic based-small packet can be purchase fm auto parts store]. Re-install new support rollers and lock rings. Re-install drum and slide belt back into position. Remove and replace felt pads and glides into inside of front bulkhead. Reinstall front bulkhead and top panel [connect door switch wires]. Install belt around idle tension pulley. Re-install lower panel. All parts fit perfectly and delivered quickly. Belt had just been replaced previously.
Other Parts Used:
Drum Glide Drum Support Roller Single Felt Pad Retaining Ring
  • Gregory from Virginia Beach, VA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced broken/worn parts
Simple replacement
Other Parts Used:
Rinse Aid Cap Overflow Grille
  • Nicholas from Pleasanton, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

3 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Sharon
August 27, 2019
Is there a replacement part to secure the bulb and socket to the back of the refrigerator? The light slipped out of place and melted the plastic light shield as well as part of the plastic back liner. I have pushed the socket back in place but I am afraid it will slip again. Fortunately the light switch works and turns the light off when the door is closed. Can I glue the socket in place? I had a fire inside a Kenmore I owned in the late 1980's. That time the switch failed and the only thing that prevented a house fire was the door seal. If that seal had failed and the fire had gotten oxygen, my house would have burned down because we were away.
For model number 10658567891
PartSelect logo
Hi Sharon, Thank you for your question. There is a light socket kit that you may purchase for your model. The part number listed under your model number for the light socket kit is PS371236. The light socket in your refrigerator houses the light bulb and connects it to the power source. If your refrigerator light is not coming on when you open the door, you may need to replace the light socket. Before you replace the light socket, be sure that your light bulb is in working condition, as this may solve the same problem. This light socket kit comes with 2 wire connectors, a light shield, and the new socket. The wire connectors that come with this kit are included so your new socket can replace a variety of old ones. If this light socket is different than your original, you will need to use the connectors to make it fit your refrigerator. Be sure to follow the instructions provided, so this part will fit your refrigerator properly. There is also a video listed with the light socket kit on our website that you may reference for information on how to install it. Here is a link to the video, https://www.partselect.com/PS371236-Whirlpool-4387478-Light-Socket-Kit.htm?SourceCode=4&SearchTerm=10658567891&ModelNum=10658567891. I hope this helps. Thank you and have a great day!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Regina
June 25, 2021
The cover to my refrigerator got burnt from the light fixture I need a new cover. I noticed the one I found looks a little different then the one I have. I wanted to know if the one online will fit my model refrigerator.
For model number GS6SHEXNB00
PartSelect logo
Hi Regina, Thank you for your question. The part number listed under your model number for the light lens cover is PS11740384. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Was this helpful?
Thank you for voting!
Related Parts:
Kim
October 5, 2021
Need a light lens cover for Whirlpool refrigerator. Where can I find one to fit?
For model number MED25TQXGW00
PartSelect logo
Hi Kim, Thank you for your question. There are 2 light lens covers listed under your model number. The part number listed under your model number for the light lens in the refrigerator section is PS11739581 and the part number listed for the light lens dispenser near the ice maker is PS11738981. If you would like to place an order for them, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.

Was this helpful?
Thank you for voting!
Related Parts:
  • 1
;
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11739581
Manufacturer Part Number: WP2203266
Brand
Model Number
Description
Kenmore
10648262891
Refrigerator
Kenmore
10648262892
Refrigerator
Kenmore
10648262893
Refrigerator
Kenmore
10648264893
Refrigerator
Kenmore
10648267891
Refrigerator
Kenmore
10648267892
Refrigerator
Kenmore
10648267893
Refrigerator
Kenmore
10648562891
Refrigerator
Kenmore
10648562892
Refrigerator
Kenmore
10650202990
Refrigerator
Kenmore
10650202991
Refrigerator
Kenmore
10650202992
Refrigerator
Kenmore
10650203990
Refrigerator
Kenmore
10650203991
Refrigerator
Kenmore
10650203992
Refrigerator
Kenmore
10650204990
Refrigerator
Kenmore
10650204991
Refrigerator
Kenmore
10650204992
Refrigerator
Kenmore
10650209990
Refrigerator
Kenmore
10650209991
Refrigerator
Kenmore
10650209992
Refrigerator
Kenmore
10650252000
Refrigerator
Kenmore
10650252001
Refrigerator
Kenmore
10650254000
Refrigerator
Kenmore
10650254001
Refrigerator
Kenmore
10650257000
Refrigerator
Kenmore
10650257001
Refrigerator
Kenmore
10650259000
Refrigerator
Kenmore
10650259001
Refrigerator
Kenmore
10650262990
Refrigerator
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service