This timer knob insert cap is just over two inches in diameter. It is all white in color and is made of plastic.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Maytag Dryer Timer Knob Insert Cap
Troubleshooting
This part works with the following products:
Dryer, Washer, Washer Dryer Combo.
This part works with the following products:
Maytag, Crosley, International.
Part# WP22001664 replaces these:
AP6006233, 22001664
Customer Repair Stories
Average Repair Rating: 5.0 / 5.0, 17 reviews.
What's this?
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
The Plastic Knob Broke And Wouldn't Grip The Steel Movement
All I did was put the three pieces together (1-2-3! So easy) and attached to the metal piece of the dryer. Now I can set the dryer to any temperature and time I need!
1, Unplug unit from power outlet. 2, Removed 3 screws on the top back control console, 3, pushed bottom section back (standing in front) and tip top section foward, console then will lay flat on top of the washer, 4, remove wire connector, 5, remove 1/4 " screw lower left side, 6, lift locking tap up and slide timer to the left. 7, Set new timer in place and reverse the procedure starting with step 6.
Ordered the part..... waited a few days fro it to arrive, (it came quite quick considering). Sat down in my easy chair and assembled the knob and gave it to my wife to slip it on the dryer. Whew, I was beat.... hehe
Wow it was the easiest thing I have ever done.. I am NOT a DIY person.. Company wanted $108.00 to do, it cost me less than $20.00 and 2 minutes.. I have told everyone I know!!! Thanks
hey this was so easy that 6 year old could put the parts together..I loved this! No repairman and no going to an appliance store and getting frustrated.Easy as pie!
Removed clip that held timer knob in place, replaced timer know with new one and reinstalled clip. The snapped on the new cap. Took a whole minute to do.
called SEARS told part not available any longer. Would have to purchase new dryer. Also told part could not be ordered from MAYTAG due to age. Called PART SELECT and had new parts in four days. Put new knob on, Placed door lock in hole, JOB DONE (15 minutes) saved $ 500 to $600 on new one. Wayne
the plastic piece that went over the metal timer D post cracked. Was not able to turn on timer without pliers
I ordered the timer base knob, timer knob insert cap and the timer dial skirt. We put all three pieces together and put it on the D metal timer post. Good as new!
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tom
November 7, 2017
I am replacing the timer but having difficulty in removing the timer knob. How do I remove the entire knob to remove the timer? You tube states to lift a tab on the back side of timer but my timer does not have such tab.
For model number MAV6000AWW
Hi Tom. Thank you for the question. Here is a link to the video on his to uninstall this knob. Hope it helps!
https://www.youtube.com/watch?v=AV2-ZOkCZls
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dave
September 23, 2017
How do i replace the timer knob
For model number MDE9316AYW
Hi Dave,
Thank you for your inquiry. There is video listed with the part information on our website that you may reference on how to install the knob. You will find it below the photo of the part on pour website. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This timer dial skirt is just over three inches in diameter. It is white in color and is made entirely of plastic. This skirt has a gray indicator triangle.
