Refrigerator Crisper Pan

No repair, just slid the drawers in their places.
Since you had a diagram of the refrigerator parts, ordering the parts was easy and I was confident that the parts were the correct ones.

Entering the model # of the fridge and utilizing the diagram f parts it was easy to order exactly the right parts and replace them with ease. The drawer slid right into place and the drawer cover also. How happy I was with the ease of the ordering & time to deliver. I did order a wrong part (my fault) but the return process is also so clear and simple!! I would not hesitate to refer others to PartSelect.

It took me less than 5 minutes and I had everything installed myself. thanks for the help in ordering the right parts

I ordered the 2 new drawers, the crisper pan and the meat pan with handle. I took them from the box, wiped them out and slid them right into the spots where my previous drawers were. End of story. This took less than 5 minutes to install. I used the chat feature to inquire as to what number items that I needed to order these 2 drawers, was given the numbers and order the items on line right then. Easy They arrived in record time, like maybe 2 days. They were well packed and arrived in pristine condition.

remove old crisper pan
install new crisper pan
dispose of old crisper pan

I slid the old one out and then slid the new one in

Took out old drawers, slide new drawers in.

Pulled out the old ones and put in the new ones.

This was for the control bracket which is located behind the dispensing panel. First slide out water collection tray then gently unsnap dispensing panel from fridge by using a thin blade screwdriver and pry gently in the bottom left and right corner of panel. Pull panel off. Take picture of layout, wires, and water and ice sensors for proper re-assembly. Disconnect quick disconnect terminal block from panel to control bracket components. Remove ice and water sensors along with white spacers from control bracket; take note of orientation of white spacers for re-installation. Remove control bracket by unsnapping; install new control bracket and re-install water and ice sensors plus spacers onto toothpick like supports; be sure sensors snap into place. Be gentle to avoid breaking clips. Reconnect terminal block and snap dispensing panel and water collection pan back into place.

Replaced the drawer with a new replacement.