Maytag/Maytag_Thumb/37308.gif
See part 11 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Injector Sleeve

★★★★★
★★★★★
1 Review
$13.07   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11738910
Manufacturer Part Number WP215447
Manufactured by Whirlpool
Product Description

Injector Sleeve Specifications

This is a top mounting style injector sleeve.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WP215447 replaces these:
AP6005849, 215447
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

2 questions answered by our experts.
    Sort by:
    Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
    Tom Miliano
    December 3, 2018
    Water appears to leak out of the injector sleeve. The design of this white part appears to be exposed at the top, so i'm not sure how replacing it solves the problem. Wouldn't water naturally shoot out of the exposed top?
    For model number Maytag A8200
    Hi Tom, Thank you for your question. If water is leaking out of the injector sleeve, another part may be causing the issue. I would check the rubber injector valve, the nozzle and the injector tube. The leakage could be caused by deposits of water, debris and soap deposits or the water pressure is too low and will not allow that valve valve to expand against the inside of the sleeve and seal. I hope this helps. Thank you and have a great day!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
    Mike
    January 28, 2019
    I noticed my washing machine was leaking water. After troubleshooting i found the water leaking out of (overflowing) injector sleeve if it was set for anything other than cold. Is this a bad injector sleeve or could it be a bad injector pump putting too much hot water through?
    Hello Mike, Thank you for your inquiry. It is possible that you need to replace either the injector valve. In order to suggest the correct part numbers we will need the model number of the washer. You can submit a follow up with the model number if you would like. Have a nice day!

    3 people found this helpful.

    Was this helpful?
    Thank you for voting!
      Customer Repair Stories
       Average Repair Rating: 3.9 / 5.0, 18 reviews. What's this?
      Sort by:
      Sorry, we couldn't find any existing installation instruction that matched.
      Front load washing machine leaking on floor while in fill mode.
      Removed two screws at bottom of front panel and then removed front panel. Then removed two self-tapping bolts (one on each side) holding top panel in place and swung the panel up, out of the way, to expose top of tub and water injection components. Cut off one pinch clamp and loosened screw clamp holding two injector hoses to the injector sleeve. Removed these water injector hoses from injector sleeve assembly which is mounted on top of left side panel upper flange. Replaced deteriorated rubber injector valve, nozzle and the sleeve for the injector (plastic housing containing the injector valve and nozzle). Also replaced deteriorated injector tube seal where injector tube elbow mounts to top of tub assembly. Reinstalled injector hoses with a replacement screw clamp to replace the one cut off. tightened the new clamp and the other, original, screw clamp and checked for leaks. This solved the leakage problem. Secured top panel and re-installed front panel. Hardest part of the task was determining where the leak emanated from but once found and parts ordered, it was a relative snap to fix.
      • Catherine from Wyandotte, MI
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers, Socket set
      172 of 180 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Washer leaked from top, left corner of machine.
      Removed front of machine; then tilted back the top of machine, after removing the two screws in top front. Removed the old parts, trimmed the injector hose which was slightly longer than necessary, put new injector nozzle in ruber injector valve and inserted into the new sleeve, clamping the new hose to sleeve as well as clamping the remaining functioning hose to sleeve. The new sleeve mounting bracket was slightly different from the old one, but I was able to make it work with a small block of wood and two screws. The washing macine no longer leaks, the parts arrived timely, and the price was right. Thanks.
      20 of 25 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Water was leaking on the floor
      I took the front panel off the machine and then removed the two screws that held the top on. Cut the hose clamps off the hoses and replace the injector sleeve, valve, housing, and hose to tub. I am not sure what the function of this is, other than to inject air into the water before it goes into the tub. Very easy to do if you know how to open up the washing machine.
      • Mark from Park City, IL
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Pliers, Screw drivers, Socket set
      17 of 19 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Leaking water
      The washer leaked only when i used warm or hot water. I found that the rubber injector valve would get to soft when using hot water,allowing the water to leak through and bubble out and onto the floor. I went ahead and replaced the injector nozzle, injector sleeve and the rubber injector valve. I ordered the parts monday morning and they arrived the next day. Excellent service.
      • Dennis from scottdale, PA
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers
      • Parts Used:
        WP216201, WP215447, WP213015
      14 of 16 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      I had a leak that started just under the rim of the washer and then ran down the outside of the machine
      Your website is wonderful. I read another womans account of how she fixed her machine and then I just followed her instructions...how cool is that!
      • Janis from Georgetown, TX
      • Difficulty Level:
        Really Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Screw drivers, Socket set
      9 of 11 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      washer leaking
      First I took all the screws out of the side and back cabinet, then tried to pry off the top, after breaking a couple of clips, saw that the front came off with two screws at the bottom, then removed, then two hex head screws to hold on the top, then lift top and saw that the injector was clogged and leaking out the top. If I had read the repair section first, I could have saved alot of time by not removing all the side and back screws. This would be a simple 15 minute job, if you follow the repair guide. Just cut off the clamps, stick in the injector and holder , reclamp and reassemble the washer.
      • danny from Seymour, IN
      • Difficulty Level:
        Easy
      • Total Repair Time:
        15 - 30 mins
      • Tools:
        Nutdriver, Pliers, Screw drivers
      7 of 8 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Leaking water rear left side
      This happened once before and had I remembered how to get the front door off and lift the top it would have taken me less time. I actually spent more time assessing prior to ordering parts than in repairing once the parts came.

      One odd thing - it only leaked when the hot water was entering (if the settings were on cold only no leak - no idea why that should be).

      Anyway, this injector and the rubber housing it slides into get old and clogged or deteriorate. I ordered all the parts and replace them - but probably only needed to replace the plastic injector nozzel and the rubber sleeve it fits into.

      All good now - no more leaks (until the next time!)
      7 of 10 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Water Leak as Washer Performs Its Functions
      1. Remove the front panel of the washer by removing two screws at bottom of panel … 2. pull bottom of panel out, and remove. … 3. Remove two screws that secure the washer's top to the box (one on each side of the top; located in front. … 4. lift front edge of top and tilt it up and backward. … 5. you now have EASY access to the fill hose at the top of the tub. This is where the Rubber injector valve and Injector Sleeve are located (right on top). Replace these parts and re-assemble the washer by reversing process. I suggest that while you are in this deep, replace the factory compression-type hose clamps with stainless steel hose clamps. You can see this demonstrated on a YouTube video.
      • David from SARASOTA, FL
      • Difficulty Level:
        Very Easy
      • Total Repair Time:
        30 - 60 mins
      • Tools:
        Nutdriver, Screw drivers
      • Parts Used:
        WP596669, WP216201, WP215447
      3 of 3 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Leaking at top of tub when filling with water
      Did repair as instructed by video, I'm 74 years old if I can do it anybody can!
      • Frank from Patterson, CA
      • Difficulty Level:
        Easy
      • Total Repair Time:
        1- 2 hours
      • Tools:
        Nutdriver, Pliers, Screw drivers, Socket set
      3 of 4 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      water leaking when in use ,upper back left side
      unplug machine ,shut off water supply,Removed 2 lower front panel screws ,raise panel upward "hinge type motion"and removed , Remove 2 self tapping screws from under front corners, removed liquid bleach tube from upper connector ,raise top toward back of machine , place prop "piece of wood" to hold top up,removed 1 screw attaching injector ,now replaced injector assy and install with new hoses and clamps. then assemble in reverse order
      3 of 5 people found this instruction helpful.
      Was this instruction helpful to you?
      Thank you for voting!
      Customer Reviews
      Average Rating:
      ★★★★★
      ★★★★★
      1 Review
      5.0
      Filter By Rating:
      • 5 Stars
        1
      • 4 Stars
        0
      • 3 Stars
        0
      • 2 Stars
        0
      • 1 Star
        0
        Sort by:
        Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
          Model Cross Reference
          This part works with the following models:
          PartSelect Number: PS11738910
          Manufacturer Part Number: WP215447
          Brand
          Model Number
          Description
          Maytag
          A104
          Washer - Top Loading
          Maytag
          A105
          Washer - Top Loading
          Maytag
          A112
          Washer - Top Loading
          Maytag
          A183
          Washer - Top Loading
          Maytag
          A190
          Washer - Top Loading
          Maytag
          A1910
          Washer - Top Loading
          Maytag
          A211
          Washer - Top Loading
          Maytag
          A211S
          Washer - Top Loading
          Maytag
          A212
          Washer - Top Loading
          Maytag
          A212S
          Washer - Residential
          Maytag
          A23CA
          Washer
          Maytag
          A23CDL
          Washer - Commercial
          Maytag
          A23CDW
          Washer - Commercial
          Maytag
          A23CSL
          Washer
          Maytag
          A23CSW
          Washer
          Maytag
          A23CT
          Washer
          Maytag
          A24CA
          Washer
          Maytag
          A25CA
          Washer
          Maytag
          A25CAE
          Washer
          Maytag
          A25CM
          Washer
          Maytag
          A25CME
          Washer
          Maytag
          A25CS
          Washer
          Maytag
          A25CT
          Washer
          Maytag
          A26CA
          Washer
          Maytag
          A26CAE
          Washer
          Maytag
          A26CD
          Washer
          Maytag
          A26CDC
          Washer
          Maytag
          A282
          Washer - Top Loading
          Maytag
          A283
          Washer - Top Loading
          Maytag
          A284
          Washer - Top Loading

          Get in touch, we're here to help!

          Open until 1am EST

          Contact Customer Service