Part Location Diagram of WP215120 Whirlpool SEAL FOR I
See part 47 in the diagram
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

customerservice@partselect.ca

SEAL FOR I

$6.97
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

PartSelect Number PS11738902
Manufacturer Part Number WP215120
Manufactured by Whirlpool
Troubleshooting
This part fixes the following symptoms:
Leaking
This part works with the following products:
Washer.
This part works with the following products:
Maytag.
Part# WP215120 replaces these:
2-15120, 215120
Back to Top
Customer Repair Stories
 Average Repair Rating: 3.3 / 5.0, 4 reviews. What's this?
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The hot water intake valve did not function
This clothes washer is 35 years old and runs like a champ. I did notice a bit of water below the left rear and assumed that a hose was leaking. I let it go for about 6 months, until I could fit it into the "to-do" list. During that time, the hot/cold water intake valve died. I ordered the replacement hot/cold valve a month ago but noticed, upon removal of the valve, that there was significant water drip evidence around the electrical valve solenoids. The water drips caused the valve to die. Drips came from a clogged injector hose air break directly above the valve. Replaced all hoses and water level vacuum air line. Very easy process. The front drops off with two screws. The lid is off with two screws. All hoses easy to R/R. It took about 2 hours to complete. All replacement parts were perfect. My belts are fine so I'm ready for another 30 years of service.
Other Parts Used:
Injector Sleeve Bracket - Side Mounting Air Tube for Tub Fill Volume Rubber Injector Valve Dispenser Tube Plastic Injector Nozzle Injector Hose Injector Hose Seal - SEAL NO LONGER INCLUDES HOSE
  • Paul from Huntington Beach, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
17 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer was leaking water from top left back of tub
I opened the front of cabinet (2 philips screws at bottom corner with short screwdriver. Then took out 2 cap screws that hold top on with a 3/8" deep socket and ratchet. Once in, I removed the 3 hose clamps that hold the injector and hose in place and removed both pieces. I put the injector together and put it in and clamped it back in. I put the the seal on the tub end of the hose and installed it in the tub, then clamped the other end again. I ordered the seal separate but I wouldn't have had to since one was included with the injector hose. I reused my old hose clamps since they were in good shape. With that I closed up in reverse order. I could have gotten the parts cheaper from another online souce that I found later. Other than that, PartSelect worked great.
Other Parts Used:
Injector Hose Seal - SEAL NO LONGER INCLUDES HOSE Injector Valve Kit
  • John from Stayton, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Screw drivers, Socket set
14 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water leak during fill cycle
Found the 35 year old Water injector hose was dry, brittle, and cracked. Found the new part online at a reasonable price, but was unsure if the seal came with it or not. At $3 it was worth the gamble to buy the seal. Turns out that it did come with it so in another 35 years, I'll be ready ;-) Simple replacement of the hose, one hose clamp and fitting the lip of the new seal into the hole in the top of the tub. Access was gained quickly by removing the front panel (2 phillips screws) then removing 2 sheet metal screws in the front top corners and swinging the hinged top upwards. Piece of cake.
Other Parts Used:
Injector Hose Seal - SEAL NO LONGER INCLUDES HOSE
  • Mark from Clinton, NC
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Socket set
4 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Leak
This new injector hose was much better than the original part which was plastic and had cracked with age and flexing the now one is rubber and should last a long time. The part, although it wasn't clear, came with the seal.

The only trick to installing it that I came across was with the hose clamp. I could not get the clamp over the hose once in place so the trick was to get the clamp in proper position on the hose and the put the hose over its barb (it will go with some careful "fenagleing"), you can't get the hose clamp to move after you put the hose on.
Other Parts Used:
Injector Hose Seal - SEAL NO LONGER INCLUDES HOSE
  • William from Gladstone, VA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
Questions and Answers

Be the first to ask our experts a question about this part!

;
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738902
Manufacturer Part Number: WP215120
Brand
Model Number
Description
Maytag
A106
Washer - Top Loading
Maytag
A106S
Washer - Residential
Maytag
A110
Washer - Top Loading
Maytag
A15CA
Washer
Maytag
A15CM
Washer
Maytag
A15CT
Washer
Maytag
A16CA
Washer
Maytag
A16CM
Washer
Maytag
A16CT
Washer
Maytag
A17CA
Washer
Maytag
A17CM
Washer
Maytag
A17CT
Washer
Maytag
A180
Washer - Top Loading
Maytag
A181
Washer - Top Loading
Maytag
A182
Washer - Top Loading
Maytag
A18CA
Washer
Maytag
A18CM
Washer
Maytag
A18CT
Washer
Maytag
A209
Washer - Top Loading
Maytag
A209S
Washer - Top Loading
Maytag
A21
Washer - Top Load Washer
Maytag
A210
Washer - Top Loading
Maytag
A210S
Washer - Residential
Maytag
A21CA
Washer
Maytag
A21CM
Washer
Maytag
A21CT
Washer
Maytag
A22CA
Washer
Maytag
A22CM
Washer
Maytag
A22CT
Washer
Maytag
A23CA
Washer
Customer Service Representative

Get in touch, we're here to help!

Daily 8am - 9pm EST

Contact Customer Service