Right hand threaded nut holds the tub in place in direct drive, top loading washing machines. To remove the spanner nut you will need a spanner wrench.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Will not agitate | Leaking
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Roper.
Part# WP21366 replaces these:
AP6005824, 16060, 21366
Customer Repair Stories
Average Repair Rating: 1.0 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Washer was leaking.. determined it was center gasket
Completely dismantled washer per video , replaced gasket and spanner nut, then re-assembled washer. I’m a 58 year old female. It was tough. Main issue was that video was for dif. Model washer. Had to figure out some things myself.
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
5 of 5 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Paul
August 22, 2019
What size is the spanner wrench for the Whirlpool washer I like to get one ahead before i take it apart please or even the dimension of that spanner nut thats would help alot ty
Paul
For model number LSQ9200Q1
Hello Paul, Thank you for the question. Sadly, we do not have any information on the model number you provided. Could you please verify the number you provided us with? If it is correct, I recommend contacting the manufacturer and seeing if they could provide you with a part number, and then you are always welcome to check back to see if we carry the part. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Andrew
May 10, 2019
Where can a person find a spanner wrench that is used to remove and put back on the spanner nut?
For model number LSR7233BW1
Hi Andrew, thank you for your question. You can search online, speak to your manufacturer, or go to your local hardware store to see if they carry the part. Good luck with your repair.
Was this helpful?
Thank you for voting!
Simon
January 14, 2019
Agitator stopped working - what part to i replace?
For model number LA5800XMW0
Hi Simon, thank you for your question. There are a number of parts that you should check. First you should check your lid switch. You may also want to check your drive block and your belt to see if either has worn down. If those parts are fine you may want to take a look at your motor capacitor and the motor itself. I hope that helps. Good luck with your repair.
Was this helpful?
Thank you for voting!
Diane
September 13, 2019
The agitator shaft in my washer is not engaging with the agitator. I can feel it turning inside the agitator but it isn’t actually turning it. Which part would i need to replace? Thank you!
For model number WTW4816FW2
Good Day Diane. Thank you for your question in regards to your unit (Model Number WTW4816FW2). Based on our research you may need to purchase a Agitator Cam Kit (PartSelect Number PS334648). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Was this helpful?
Thank you for voting!
Larry
November 3, 2022
The bolt inside the agitator (under the fabric softener dispenser) keeps coming loose after every single load of laundry. When I take off the white plastic agitator there are no parts inside (like dog ears) so the bolt tightens into the spanner??
Do you know if this model was discontinued because of this problem?
I would appreciate any input on this problem. Thanks
For model number WTW4815ew1
Hello Larry, thank you for your question. The plastic agitator tightens into the washer drive block. Replacing the agitator bolt, part number PS11748116, and the drive block, part number PS11741977, will fix your problem. Please reach out to customer service if you need help placing an order. Glad to be of help!
These agitator directional cogs are commonly referred to as dog ears. They come four to a package and are usually used with direct drive washing machines.
