Maytag/Maytag_Thumb/48377.gif
See part 30 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 10PM EST

customerservice@partselect.ca

Drive Belt - 51 inches long

★★★★★
★★★★★
11 Reviews
$23.15   In Stock

Get this part fast. Average delivery time via standard shipping: 1.8 days.

PartSelect Number PS11738882
Manufacturer Part Number WP21352320
Manufactured by Whirlpool
Product Description

Drive Belt - 51 inches long Specifications

This V-style drive belt is about 51" long and 3/8" wide. This part is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt encounter wear and tear.

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Burning smell | Noisy | Spins slowly | Pumps but will not spin
This part works with the following products:
Washer.
This part works with the following products:
Norge, Magic Chef, Admiral, Maytag.
Part# WP21352320 replaces these:
AP6005822, 21001478, 21352320, 35-2073, 35-2320, WP21352320VP
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

11 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Albert
September 29, 2017
Can I purchase and replace just the motor pulley?
For model number MAV2757AWW
Hello, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is only sold as part of the motor assembly,PartSelect Number PS11738839. Hope this helps!

9 people found this helpful.

Was this helpful?
Thank you for voting!
Derek
July 1, 2019
My washer will start and go through the initial cycles of filling, then agitating but then all of a sudden will start to sound like its bogging out and is having a hard time running. When this starts to happen it then eventually stops, and a burning smell is present. There is also a consistent metal of metal grinding sound. Ive disconnected and washed out the pump and when i did the pulley wheel seems to grind on its metal casing which i assume is the noise i hear. My gut is telling me maybe the belt is slipping and also the drain pump is grinding on itself.. what is the answer here?
For model number PAV2300AWW
Hello Derek, thank you for inquiring. For this symptom you will want to replace the Drain Pump with Pulley part PS11741799 for your model.

2 people found this helpful.

Was this helpful?
Thank you for voting!
Danny
March 7, 2019
Motor pulley was broken because of wrong drive belt a little wider for Maytag washer mav3855aww is it easy to install a new pulley to the motor please tell me the right parts.On this model. Thank you.
For model number MAV3855AWW
Hello Danny, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738839. The pulley is only sold as part of the motor assembly. We also have a How To Video online on how to install. Thank you for your inquiry, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Related Parts:
Ramiro
April 15, 2019
Is this belt fit in my Maytag washer ?
For model number HAV2557AWW
Hello Ramiro, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738882. Hope this helps, good luck with this repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Dwight
March 10, 2018
How do I remove the timer knob to remove the timer for the washer?
For model number CAV2004AJW
Hello Dwight, Thanks for your question. You will need to access the back of the timer. In the center there is a hole with a shaft. Pull out on this shaft which will let you remove the timer. I hope this helps.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Steve
December 3, 2018
Tan motor pulley is coated with melty black gunk, i assume from belt slipping. I see new pulley only comes with motor unit, which i hope i do not need. I am thinking i can scrape off the black plastic from tan pulley, install a new belt and be done with it. Could melted plastic be part of original pulley, or more likely residue from melting belt?
For model number amana washer nav3335aww
Hello Steve, thank you for your question. The residue is probably from the belt, but it could be because the pulley is/has started to seize and will have to be replaced. If the pulley doesn't turn freely the motor would have to be replaced as the pulley is only available by ordering the motor part number PS11738839. I hope this helps!

Was this helpful?
Thank you for voting!
Thomas
February 25, 2019
Water will fill but the machine will not do anything besides that. I changed the belt. What else could it be ?
For model number PAVT244AWW
Hello Thomas, Thank you for contacting us.I suggest checking the following parts: PS2003651 Transmission Pulley and Bearing Kit, PS11738839 Motor with Pulley, and PS2017908 Agitator Base. Good luck with your repair!

Was this helpful?
Thank you for voting!
Ronald
February 18, 2019
After the drying cycle the cloths are still damper then what they used to be iam thinking the belt might be the problem the washer is 10 years old and the belt has never been changed what is your thought that the problem might be the washer does run through the cycles ok
For model number mavt446aww
Hello Ronald, thank you for your question. Yes, we would recommend replacing the Drive Belt - 51 inches long Part Number: WP21352320 and Transmission Pulley and Bearing Kit Part Number: 12002213 first. If that doesn't fix the issue the issue could be the drain pump itself. I hope this helps!

Was this helpful?
Thank you for voting!
Jamie
November 15, 2018
On this washer the motor spins but does not contact with the belt, if the motor is physical push to create tension on the belt the drum then spins. Prior to it not working it was making loud noise during operation. Would this be the tension spring or belt or combination of both.
For model number MAV408DAWW
Hello Jamie, Thank you for the question. It sounds like the belt may be worn out and stretched and may need to be replaced. Hope this helps, good luck with this repair!

Was this helpful?
Thank you for voting!
Brenda
May 10, 2019
I just replaced my belt because it wasn’t spinning all the water out now it spins all water out but doesn’t spin fast enough to wring clothes out
For model number Mav3855aww
Hi Brenda, thank you for your question. Other parts that you should check when your appliance is not draining correctly and not spinning fast enough would be your drain pump, your lid switch, and your motor. I hope that helps. Good luck with your repair.

Was this helpful?
Thank you for voting!
Part Videos

Replacing your Norge Washer Drive Belt - 51 inches long

Customer Repair Stories
 Average Repair Rating: 3.5 / 5.0, 74 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Pump was making a grinding noise
The pump is located behind a small panel on the back, lower left side of my washer. It's attached to the bottom frame with 3 screws. It has two hoses attached, each with one spring clamp. Lift one side of the washer and slip the drive belt off the pully. Release the spring clamps on the hoses with a pair of pliers and remove the hoses. A small amount of water will drain from the hoses and pump when removed. Remove the three screws holding the pump to the frame and remove the pump. Install the new pump in the same position. Reattach the hoses, replace the belt, and reinstall the cover panel. That's all there is to it.
  • Ranse from Layton, UT
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Pliers, Socket set
  • Parts Used:
    WP35-6780, WP21352320
289 of 309 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
washer out of balance most of the time
watched online video help. removed washer panels. removed washer springs. disconnected hoses. pulled tub out and placed on top to expose. snubber ring. replaced snubber ring, placed tub back into proper space. replaced old springs with new set. reconnect hoses. Washer ran perfect. Was about to spend $800.00 on new washer but only spent $43.00 in parts and a few hours labor and good as new
74 of 91 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
motor pulley burn and belt too
I pull out the motor pulley and put the new one then put belt on. but looks like the water pump its bad and I will have to order from you. Your service its the best I ever had ordering and deliver A+++++
  • Jose A from Kissimmee, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
  • Parts Used:
    WP21001950, WP21352320
45 of 57 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
slipping drive belt
Tipped machine 45-degrees to reveal belt on bottom of machine. Used screwdriver to remove old belt which looked fine. Installed new belt (which arrived from PartSelect within 2-days) but it felt loose. Tried machine anyway and it works just fine. Easiest repair ever. Thanks, PartSelect!
  • stephen from redondo beach, CA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
  • Parts Used:
    WP21352320
24 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drive belt was squealing and slipping
I wasted time opening up the metal container for the washing machine, which was easier than expected. The top simply pops off with a little bit of prying with a screwdriver, then the front panel is held in place with two sheet metal screws. The front panel then lifts off and you can see the exterior case for the tub drive mechanism and motor. But, it wasn't obvious what was wrong until I tilted the entire unit backwards and saw the drive belt available directly under the machine and fully accessible without any tools. It was obvious, because there was a 1/8" worth of belt fragment dust under the machine. A new belt was all it needed and after I ordered it from PartSelect, I simply jimmied the old belt off the main pulley and put the new one on. It no longer squeals or slips. Hopefully, I gained another 5 years of life out of the washing machine.
  • Kevin from North Plains, OR
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
  • Parts Used:
    WP21352320
15 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water intermittently leaking from bottom of washer
I could not tell where the leak was coming from. It was intermittent. Also the clothes were not getting totally dry in the spin cycle. Finally the drum stopped turning. The bearing in the waterpump was shot and the water was leaking from the waterpump. Luckily or unluckily, the bearing completely went and I then found out that the intermittent leaking was coming from the pump. I replaced the pump and the belt that was damaged when the pump bearing locked up. This has resolved the leaking issue.
  • Debbie from Colchester, CT
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Pliers
  • Parts Used:
    WP35-6780, WP21352320
15 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
During the first rinse cycle, a loud metal to metal grinding sound occured. I shut down the machine and inspected thebottom of the washed and found the water pump hard to move. Obviously there was a problem.
I simply emptied the machine of all the water, tilted the washer on its side,removed the small gray access panel located on the back of the washer, removed both hoses and the drive belt. Then I removed the three screw bolts that hold the water pump in place. Then I replaced the old pump with the new on by just following the process in reverse. I did notice that the new pump did not come with a metal support plate(at least thats what I called it. No problem though when I found out from a local repairman that its a newer design. Total time less than 15 minutes.
  • Ed from Adamsville, TN
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
  • Parts Used:
    WP35-6780, WP21352320
14 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Making a lot of noise during wash and drain cycle.
The drain pump assembly was going bad. It eventually froze and burned the drive belt and motor pulley up. I replaced the drain pump by removing 3 screws. I replace the motor pulley and belt in about 5 minutes without removing any parts. Simple fix. Ran through 3 cycles and works perfectly. Thanks!
  • James from New Braunfels, TX
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set
13 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer Shakes And Dances
No need to buy a brake wrench nor the expensive spring remover. Once the drum is out the washer turn it upside down and loose the screws holding the transmission about a little more than half way, to give the new snubber enough room to fit in, them tigh and assamble everything back together
  • Adrian from West New York, NJ
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Wrench set
13 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer made awful grinding sound then quit spinning
I took the bad water pump off installed the new one and hooked up the new drive belt. Overall it took me twenty minutes, not all that hard to do.
  • Matthew from DOUGLASSVILLE, PA
  • Difficulty Level:
    Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Pliers, Socket set
  • Parts Used:
    WP35-6780, WP21352320
13 of 17 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
11 Reviews
4.5
Filter By Rating:
  • 5 Stars
    9
  • 4 Stars
    1
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738882
Manufacturer Part Number: WP21352320
Brand
Model Number
Description
Norge
6002A
Washer - WASHER
Norge
6002A REV A
Washer - Norge Washing Machine Model 6002A REV A (6002AREVA) Parts
Norge
6430
Washer - WASHER
Norge
6430 LOT A
Washer - Norge Washing Machine Model 6430 LOT A (6430LOTA) Parts
Norge
6430 LOT A REV A
Washer - Norge Washing Machine Model 6430 LOT A REV A (6430LOTAREVA) Parts
Norge
6430 LOT A REV B
Washer - Norge Washing Machine Model 6430 LOT A REV B (6430LOTAREVB) Parts
Norge
6432A
Washer - WASHER
Norge
6432A REV A
Washer - Norge Washing Machine Model 6432A REV A (6432AREVA) Parts
Norge
6432A REV B
Washer - Norge Washing Machine Model 6432A REV B (6432AREVB) Parts
Norge
6432A REV C
Washer - Norge Washing Machine Model 6432A REV C (6432AREVC) Parts
Norge
6432A REV D
Washer - Norge Washing Machine Model 6432A REV D (6432AREVD) Parts
Norge
6433A
Washer - WASHER
Norge
6440A
Washer - WASHER
Norge
6440A REV A
Washer - Norge Washing Machine Model 6440A REV A (6440AREVA) Parts
Norge
6440A REV B
Washer - Norge Washing Machine Model 6440A REV B (6440AREVB) Parts
Norge
6440A REV C
Washer - Norge Washing Machine Model 6440A REV C (6440AREVC) Parts
Norge
6440A REV D
Washer - Norge Washing Machine Model 6440A REV D (6440AREVD) Parts
Norge
6440A REV E
Washer - Norge Washing Machine Model 6440A REV E (6440AREVE) Parts
Norge
6440A REV F
Washer - Norge Washing Machine Model 6440A REV F (6440AREVF) Parts
Norge
6440A REV G
Washer - Norge Washing Machine Model 6440A REV G (6440AREVG) Parts
Norge
6440A REV H
Washer - Norge Washing Machine Model 6440A REV H (6440AREVH) Parts
Norge
6440A REV J
Washer - Norge Washing Machine Model 6440A REV J (6440AREVJ) Parts
Norge
6440A REV K
Washer - Norge Washing Machine Model 6440A REV K (6440AREVK) Parts
Norge
6443A
Washer - WASHER
Norge
6443A REV D
Washer - Norge Washing Machine Model 6443A REV D (6443AREVD) Parts
Norge
6443B
Washer - WASHER
Norge
6530A
Washer - WASHER
Norge
6530A REV A
Washer - Norge Washing Machine Model 6530A REV A (6530AREVA) Parts
Norge
6530A REV B
Washer - Norge Washing Machine Model 6530A REV B (6530AREVB) Parts
Norge
6530A REV C
Washer - Norge Washing Machine Model 6530A REV C (6530AREVC) Parts

Get in touch, we're here to help!

Open until 10PM EST

Contact Customer Service