This V-style drive belt is about 51" long and 3/8" wide. This part is made to slip on the motor pulley to bring the basket up to the speed required and this makes the belt encounter wear and tear.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your Norge Washer Drive Belt - 51 inches long
Troubleshooting
This part fixes the following symptoms:
Burning smell | Spins slowly | Will not drain | Will not agitate
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Andrew P - February 23, 2023
Verified Purchase
Perfect fitment
Part was exacttly as ordered and fit perfect. Inordered 3 parts to fix my Maytag washer and all of them (drum spring, snubber ring, belt) were perfecr and res9lved my issue.
★★★★★
★★★★★
Jeff B - December 11, 2021
Verified Purchase
Worked Great
Arrived quickly and was exactly what I needed
★★★★★
★★★★★
Yvan B - August 25, 2020
Verified Purchase
Exact fit
Not only was the part an exact fit, the ship time was extremely fast
★★★★★
★★★★★
Wes S - June 19, 2020
Verified Purchase
I really appreciate being able to call in my order
The part was correct and perfect. The repair videos make it easy to do repairs myself. Called in my order and the lady was very pleasant and helpful in making sure I was ordering the right part. Being able to call in gives it that personal touch which is so refreshing from all this impersonal automated world we live in. This isn't my first experience ordering from PartSelect and it won't be my last. I Highly recommend them. Thank you to the folks at PartSelect.
★★★★★
★★★★★
Nevill B - June 1, 2019
Verified Purchase
easy repair
part was what i wanted and was easy to replace. Tracking of part was an other story as tracking was very poor had no idea when part would arrive site for tracking never keep up to date but that is purolater they our not reliable.
★★★★★
★★★★★
Gary W - May 21, 2019
Verified Purchase
Right part - easy to replace
The washer wasn't spinning fast enough which resulted in it not draining. Had a burning smell too. Belt was worn, replaced it in 2 minutes with this part and it is working like a champ!
★★★★★
★★★★★
Jeffrey M - March 29, 2019
Verified Purchase
fast delivery
And with the instructions, so easy to install.
★★★★★
★★★★★
Doug O - January 22, 2019
Verified Purchase
Easy repair.
Fast shipping and part was exactly as needed.
★★★★★
★★★★★
Mario L - December 17, 2018
Verified Purchase
Good service.
Received the parts in 2 days. Easy repair
★★★★★
★★★★★
Clyde P - October 10, 2018
Verified Purchase
spin action back
The part arrived faster than time given. Installing was easy with videos given by the site, and our machine is working as it should. TYVM Partselect
< Prev
1
2
Next >
Customer Repair Stories
Average Repair Rating: 3.5 / 5.0, 76 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Pump was making a grinding noise
The pump is located behind a small panel on the back, lower left side of my washer. It's attached to the bottom frame with 3 screws. It has two hoses attached, each with one spring clamp. Lift one side of the washer and slip the drive belt off the pully. Release the spring clamps on the hoses with a pair of pliers and remove the hoses. A small amount of water will drain from the hoses and pump when removed. Remove the three screws holding the pump to the frame and remove the pump. Install the new pump in the same position. Reattach the hoses, replace the belt, and reinstall the cover panel. That's all there is to it.
watched online video help. removed washer panels. removed washer springs. disconnected hoses. pulled tub out and placed on top to expose. snubber ring. replaced snubber ring, placed tub back into proper space. replaced old springs with new set. reconnect hoses. Washer ran perfect. Was about to spend $800.00 on new washer but only spent $43.00 in parts and a few hours labor and good as new
I pull out the motor pulley and put the new one then put belt on. but looks like the water pump its bad and I will have to order from you. Your service its the best I ever had ordering and deliver A+++++
Tipped machine 45-degrees to reveal belt on bottom of machine. Used screwdriver to remove old belt which looked fine. Installed new belt (which arrived from PartSelect within 2-days) but it felt loose. Tried machine anyway and it works just fine. Easiest repair ever. Thanks, PartSelect!
Other Parts Used:
stephen from redondo beach, CA
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
25 of 31 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
drive belt was squealing and slipping
I wasted time opening up the metal container for the washing machine, which was easier than expected. The top simply pops off with a little bit of prying with a screwdriver, then the front panel is held in place with two sheet metal screws. The front panel then lifts off and you can see the exterior case for the tub drive mechanism and motor. But, it wasn't obvious what was wrong until I tilted the entire unit backwards and saw the drive belt available directly under the machine and fully accessible without any tools. It was obvious, because there was a 1/8" worth of belt fragment dust under the machine. A new belt was all it needed and after I ordered it from PartSelect, I simply jimmied the old belt off the main pulley and put the new one on. It no longer squeals or slips. Hopefully, I gained another 5 years of life out of the washing machine.
Other Parts Used:
Kevin from North Plains, OR
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
17 of 18 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water intermittently leaking from bottom of washer
I could not tell where the leak was coming from. It was intermittent. Also the clothes were not getting totally dry in the spin cycle. Finally the drum stopped turning. The bearing in the waterpump was shot and the water was leaking from the waterpump. Luckily or unluckily, the bearing completely went and I then found out that the intermittent leaking was coming from the pump. I replaced the pump and the belt that was damaged when the pump bearing locked up. This has resolved the leaking issue.
Obvious problem: belt destroyed. The plastic pulley on the motor was damaged beyond repair. Since you can't replace just the plastic pulley, you have to purchase another motor. The machine still would not spin. Checked the pump again. The bearings might be bad. Replaced pump; Success! washer works again. Total repair: belt $15.68, new pulley with motor $132.00, and new pump $80.00. Estimated cost to repair about $228.00. Time to troubleshoot. 1 hour, time to fix 1 hour; Total time in labor about 2 hours.
The noise problem was a combination of the belt and the snubber Ring. The snubber ring was worn out and causing most of the noise. The belt was easy to put on...the snubber ring - not so much. Plan a couple of hours to disassemble the lower portion of the washer as the snubber ring lies at the bottom of the washer tub assembly but above all the pulleys, gears and the bottom/base plate of the wash machine. A nice surprise is the large spring that pops out when you open up the bottom plate. Re-compressing that spring takes a special tool or a creative way to get it all back together after the new snubber ring is installed. I used some temporary bolts and nuts in luau of the short 1/2" sheet metal screws to compress the spring and than replaced the bolts with the original sheet metal screws once the plate was close enough to use them. It was a major pain. No doubt the pros have a special tool that takes care of this problem. Good luck!
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
14 of 27 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Making a lot of noise during wash and drain cycle.
The drain pump assembly was going bad. It eventually froze and burned the drive belt and motor pulley up. I replaced the drain pump by removing 3 screws. I replace the motor pulley and belt in about 5 minutes without removing any parts. Simple fix. Ran through 3 cycles and works perfectly. Thanks!
No need to buy a brake wrench nor the expensive spring remover. Once the drum is out the washer turn it upside down and loose the screws holding the transmission about a little more than half way, to give the new snubber enough room to fit in, them tigh and assamble everything back together
Ask our experts a question about this part and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Albert
September 29, 2017
Can I purchase and replace just the motor pulley?
For model number MAV2757AWW
Hello,
Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is only sold as part of the motor assembly,PartSelect Number PS11738839.
Hope this helps!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Danny
March 7, 2019
Motor pulley was broken because of wrong drive belt a little wider for Maytag washer mav3855aww is it easy to install a new pulley to the motor please tell me the right parts.On this model. Thank you.
For model number MAV3855AWW
Hello Danny, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738839. The pulley is only sold as part of the motor assembly. We also have a How To Video online on how to install. Thank you for your inquiry, good luck with this repair!
I just replaced my belt because it wasn’t spinning all the water out now it spins all water out but doesn’t spin fast enough to wring clothes out
For model number Mav3855aww
Hi Brenda, thank you for your question. Other parts that you should check when your appliance is not draining correctly and not spinning fast enough would be your drain pump, your lid switch, and your motor. I hope that helps. Good luck with your repair.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Derek
July 1, 2019
My washer will start and go through the initial cycles of filling, then agitating but then all of a sudden will start to sound like its bogging out and is having a hard time running. When this starts to happen it then eventually stops, and a burning smell is present. There is also a consistent metal of metal grinding sound. Ive disconnected and washed out the pump and when i did the pulley wheel seems to grind on its metal casing which i assume is the noise i hear. My gut is telling me maybe the belt is slipping and also the drain pump is grinding on itself.. what is the answer here?
For model number PAV2300AWW
Hello Derek, thank you for inquiring. For this symptom you will want to replace the Drain Pump with Pulley part PS11741799 for your model.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Ramiro
April 15, 2019
Is this belt fit in my Maytag washer ?
For model number HAV2557AWW
Hello Ramiro, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738882. Hope this helps, good luck with this repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Dwight
March 10, 2018
How do I remove the timer knob to remove the timer for the washer?
For model number CAV2004AJW
Hello Dwight,
Thanks for your question. You will need to access the back of the timer. In the center there is a hole with a shaft. Pull out on this shaft which will let you remove the timer.
I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Ronald
February 18, 2019
After the drying cycle the cloths are still damper then what they used to be iam thinking the belt might be the problem the washer is 10 years old and the belt has never been changed what is your thought that the problem might be the washer does run through the cycles ok
For model number mavt446aww
Hello Ronald, thank you for your question. Yes, we would recommend replacing the Drive Belt - 51 inches long Part Number: WP21352320 and Transmission Pulley and Bearing Kit Part Number: 12002213 first. If that doesn't fix the issue the issue could be the drain pump itself. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kim
November 3, 2022
This washer is the BEST! It's about 20 years old & has NEVER had a problem.
But when it spins it's off balance, real noisy, actually moves across the floor...
I frequently have to rearrange the clothes to make it spin smoothly.
For model number PAV2300AWW
Hello Kim, thank you for contacting us. We would recommend checking the following parts to fix your issue: Drive Belt, part number PS11738882, Transmission Pulley and Bearing Kit, part number PS2003651, and Drain Pump, part number PS11741803. We look forward to hearing from you if you need assistance with placing an order through our 7-days-a-week customer service. We hope this helps!
Drive belt WP221352320 is this the replacement for 35-3662 AU the website says it 51 inches long mine seems not to be that big.
For model number AAV7000AWW
Hello Leonard, thank you for your question. We can confirm that the Belt PS11738882 is the correct one for model AAV7000AWW and it is 51 inches long. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Steve
December 3, 2018
Tan motor pulley is coated with melty black gunk, i assume from belt slipping. I see new pulley only comes with motor unit, which i hope i do not need. I am thinking i can scrape off the black plastic from tan pulley, install a new belt and be done with it. Could melted plastic be part of original pulley, or more likely residue from melting belt?
For model number amana washer nav3335aww
Hello Steve, thank you for your question. The residue is probably from the belt, but it could be because the pulley is/has started to seize and will have to be replaced. If the pulley doesn't turn freely the motor would have to be replaced as the pulley is only available by ordering the motor part number PS11738839. I hope this helps!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
This pump helps expel water from the washing machine and is activated after the spin speed is maintained for a specific period of time. NOTE: This is a redesigned part. The pump now mounts on to the base of the washer - ...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738882
Manufacturer Part Number: WP21352320
