This is the bearing for the lid hinge. Sold individually.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part fixes the following symptoms:
Lid or door won’t close
This part works with the following products:
Washer, Washer Dryer Combo, Dryer.
This part works with the following products:
Kenmore, Whirlpool, KitchenAid, Maytag.
Part# WP21258 replaces these:
AP6005814, 21258, 3391899, 354240, 8299971, 93949
Customer Repair Stories
Average Repair Rating: 2.8 / 5.0, 1 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
spin cycle did not activate
Replaced hinge switch. Still no spin cycle. Noticed hinge bearing cracked & if hinge forced into switch, spin activated. Ordered new hinge bearings.Spin cycle still didn't engage. On further examination, observed that hinge was bent. Straightened hinge & worked like a charm. Didn't really need new switch or bearings. NOTE : Avoid having washer door bang shut.Took longer than expected, but each procedure was simple.
Other Parts Used:
Enrique from Miami Shores, FL
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
1 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rose
February 26, 2019
Washer lid won't close therefore washer will not work. Washer stuck at rinse cycle
For model number WTW4820XQ
Hello Rose, Thank you for contacting us. I suggest checking the following parts: PS3497627 Lid Latch Assembly, PS11750882 Lid Latch Strike, and PS11738874 Lid Hinge Bearing. Good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jeffrey
September 15, 2022
Replaced lid switch and strike plate but the lid won't lock. won't advance from the wash cycle.
For model number wtw5000dw2
Hello Jeffery, thank you for contacting us. We would recommend inspecting the lid hinge, part number PS11742837, and hinge bearing, part number PS11738874. If you have any follow-up queries please feel free to reach out to customer service, we are available seven days a week. Glad to be of help!
