Part Location Diagram of WP21001950 Whirlpool Motor with Pulley
See part 12 in the diagram
Replacing your Maytag Washer Motor with Pulley
( Grid squares measure 1x1 inch )
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

customerservice@partselect.ca

Motor with Pulley

 Fits your LNC6760B71!
★★★★★
★★★★★
1 Review
$211.69
  In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your LNC6760B71!
PartSelect Number PS11738839
Manufacturer Part Number WP21001950
Manufactured by Whirlpool
Product Description

Motor with Pulley Specifications

This motor is a 2 speed, 1/2 HP, 120V, 60Hz.
How Buying OEM Parts Can Save You Time and Money

How Buying OEM Parts Can Save You Time and Money

Part Videos

Replacing your Maytag Washer Motor with Pulley

Replacing your Maytag Washer Motor with Pulley
Troubleshooting
This part fixes the following symptoms:
Burning smell | Will Not Start | Will not agitate | Will not drain
This part works with the following products:
Washer.
This part works with the following products:
Maytag, Admiral, Crosley, Magic Chef.
Part# WP21001950 replaces these:
AP6005780, 12002815, 21001506, 21001516, 21001750, 21001922, 21001950, 22004297, WP21001950VP
Back to Top
Customer Reviews
Average Rating:
★★★★★
★★★★★
1 Review
5.0
Filter By Rating:
  • 5 Stars
    1
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
  • 1
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
Customer Repair Stories
 Average Repair Rating: 3.2 / 5.0, 14 reviews. What's this?
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
The belt and pulley on the drive motor broke
unplug the washer. Removed the top of the washer by removing the hold scews and tabs on the upper back. Place a scew drive under the front and pry up to release the snap tabs. Then the front panel by removing the two screws on top and lift the panel up to expose the motor at bottom front. Remove the motor cover (plastic)and motor from the base, replace the pulley on the shaft (you may need to break or pry the old pulley off) install the new pulley making sure it is all the way up the shaft locking the tabs into the shat groove. Reinstallmotor to the base. To replace the belt, tilted the unit backwards to access the pulleys from the bottom and installed.
Note: it ios easier to install the belt fully on the two smaller puleys attcahed to the drive motor and pump and then wrap as much as you can around the larger drum pulley. Hold the belt in one hand and turn the drum pulley clockwise with the other and the belt will follow and install. reverse steps to reassemble.
Other Parts Used:
  • Michael from Warminster, PA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Wrench (Adjustable)
152 of 190 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
broken motor pulley
i removed the plastic cover.then i disconnected the harnest.i then removed the 2 screws and took the motor out. i took a hack saw blade and made a mark in the old pulley. i then took a screw driver and put it in the crack and tapped on it and the old pulley fell apart. i then put on the new pulley and reconnect the motor. i then reconnect the belt.my washer is working great.it was so easy and i save myself some money in the process.
Other Parts Used:
  • leighton from staten island, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
63 of 77 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
motor pulley burn and belt too
I pull out the motor pulley and put the new one then put belt on. but looks like the water pump its bad and I will have to order from you. Your service its the best I ever had ordering and deliver A+++++
Other Parts Used:
Drive Belt - 51 inches long
  • Jose A from Kissimmee, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Pliers
45 of 60 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Knocking and Squealing Noise then Motor Hum
Removed the control panel, top and front panels to access the motor. Removed the motor and inspected. The motor looked fine. Leaned machine back and remove the brake cover following the directions posted by others on this website. Discovered grease and grime on the friction brake, which did not look right. The grease must have slung off of the transmission shaft. Wiped the brake clean with a dry rag and put machine back together. Machine did not run, motor only hummed. I replaced the motor only and the machine now works fine. My feeling is the grease caused the brake to stick and every time the motor started up, the sticking brake put a strain on the motor. Over time this cause the motor to burn up. Machine is only 6 years old. Sounds like a design flaw.
Other Parts Used:
  • Ron from Norfolk, VA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Socket set
28 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Unit stopped washing during cycle
Removed the 2 screws on the front panel after unplugging the unit. Removed the 2 screws on the safety cover and removed the wiring coupling. Removed the 2 bolts that was holding down the belt adjuster. Fed adjuster around pully wheel after removing belt. Installed new motor and re-assembled in reverse of disassembly. Plugged in unit and tested motor. Unit still operating satisfactory. Wash about 5 loads everyday. Large family
Other Parts Used:
  • Steve from Jacksonville, FL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Socket set
27 of 32 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
One of the two bolts that holds the motor in place broke off and since the bolts are actually embedded in the motor I had to buy the whole motor rather then just a 25 cent bolt.
First I took the front shield off, then I took the motor off.
Other Parts Used:
  • Elmer from Fort Campbell, KY
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Socket set
18 of 38 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The motor ovrheated,
I took the front pannel off just 2 scrwe was holdig the pannel,the motor was in ftont,4 bolt was holdig the moto,and it is very easy to change,
Other Parts Used:
  • Dennis from Merritt Island, FL
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Socket set
16 of 19 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water Pump Failed
Obvious problem: belt destroyed. The plastic pulley on the motor was damaged beyond repair. Since you can't replace just the plastic pulley, you have to purchase another motor. The machine still would not spin. Checked the pump again. The bearings might be bad. Replaced pump; Success! washer works again. Total repair: belt $15.68, new pulley with motor $132.00, and new pump $80.00. Estimated cost to repair about $228.00. Time to troubleshoot. 1 hour, time to fix 1 hour; Total time in labor about 2 hours.
Other Parts Used:
Drive Belt - 51 inches long
  • Douglas from State College, PA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Wrench (Adjustable), Wrench set
15 of 22 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
would'nt wash w/out getting hot
just took the front off and then took the old motor off and switched over about 2 parts from the old to the new and then put the new part on and then placed the front back on and it was ready to go
Other Parts Used:
  • Emery from Talladega, AL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers, Wrench set
10 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Washer motor
Replace the motor in 25 minutes, my repair guy said it was not worth the time , I got this motor for less than $150. And save my self over $600.00, this was incredible.
Other Parts Used:
  • Nicholas from BROOKLYN, NY
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver, Socket set
5 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

15 questions answered by our experts.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ben
August 28, 2017
Can I purchase the pulley minus the motor? Or is it a full package deal only? I only need a new pulley.
For model number MAV6000AWW
PartSelect logo
Hi Ben, Thank you for your inquiry. You can only get the motor pulley with the whole motor. It is not sold separately. I hope this helps. Good luck with your repair.

21 people found this helpful.

Was this helpful?
Thank you for voting!
Iren
December 23, 2017
Can i purchase only the pulley for model # hav2558aww ( i don't need the motor )
For model number HAV2558AWW
PartSelect logo
Hello Iren, Thank you for your inquiry. The pulley is only supplied with the motor, it does not come separately. Hope this helps!

8 people found this helpful.

Was this helpful?
Thank you for voting!
Jen
January 7, 2018
Attempting to troubleshoot an issue with my washer...it seems that the motor is not moving during the agitation cycle. it is running for the spin cycle it seems. could you give me a clue if that is an issue with the motor itself, or do i need to look at something else first? it has been squeaking loudly when it brakes for some time as well...
For model number PAV2300AWW
PartSelect logo
Hello Jen, Thank you for your inquiry. I would check the following parts first: agitator auger and post assembly, drive belt, transmission pulley and bearing kit, agitator base, and the transmission. Hope this helps!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Gary
December 19, 2018
On spin cycle tub starts turning with screeching sound. After a revolution or two motor shuts off and smokes. Removed belt, motor sometimes spins on it's own sometimes spins with a little help. Without a load when the motor spins, it spins fine.The drain pump turns freely but turns with some resistance. once the brake is released the tub spins with ease. 1- is the drain pump supposed to spin free like a top or is slight resistance normal? 2- does this sound like a damaged motor. thanks in advance for any help. god bless you! garyn
For model number MAV7260BWW
PartSelect logo
Hi Gary, thank you for your question. No the drain pump should not spin freely, you should have resistance. You actually should not be trying to spin it manually if possible because that can sometimes burn out the motor inside of the pump. For screeching you might want to check your motor but you may also want to take a look at your transmission pulley kit and your transmission assembly itself. I hope that helps. Good luck with your repair.

2 people found this helpful.

Was this helpful?
Thank you for voting!
John
October 15, 2019
My Maytag washer stops while agitating. We had the control rebuilt, and put in a new lid switch. Sometimes it blows the breaker and sometimes it’s the machine fuse.Starts, fill with water but stops during agitation
For model number MAV975AWW
PartSelect logo
Hello John, thank you for writing. This is likely due to either a faulty Transmission Pulley and Bearing, part number PS2003651, or Motor with Pulley, part number PS11738839 for your model. Good luck with your repair!

2 people found this helpful.

Was this helpful?
Thank you for voting!
Jeff
February 25, 2020
How do you get the pulley off of the motor.
For model number Pav 2300 Aww
PartSelect logo
Hi Jeff, Thank you for your question. The pulley comes attached to the motor. It is not available separately. We hope this helps. Thank you and have a great day.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Vanessa
July 14, 2022
Can you buy the pulley with the motor.
For model number PAVT244AWw
PartSelect logo
Hello Vanessa, thank you for your question. Yes, the motor and the Pulley are one unit for part PS11738839. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Lee
July 30, 2018
My motor runs for spin but not for agitate. Does this motor reverse and if so which connections do what.
For model number LNC6764
PartSelect logo
Hi Lee, Thank you for your question. If the washer is not agitating, there are some parts that you will need to check to see which ones are causing the issue. Here is a link from our website that you may reference on what parts to check, https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=LNC6764A71&mfgModelNum=&fkMfgID=1&ModelMasterID=146262&PID=34. Also, here is a link to a video from YouTube that you may reference on the motor, https://www.youtube.com/watch?v=XlaHSZFGzp0. I hope this helps. Thank you and have a great day!

Was this helpful?
Thank you for voting!
Dustin
February 11, 2022
Before I purchase the motor I had a question. The washer fills but does not agitate, I checked under the washer and the motor does not spin easily. Is the motor pulley supposed to spin freely or is there supposed to be a lot of resistance and could that be my issue?
For model number PAV3300AWW
PartSelect logo
Hello Dustin, Thank you for the question. The Pulley would have some resistance. It will only spin easy and freely when the motor is powered on and operating. We hope this helps!

Was this helpful?
Thank you for voting!
Joseph
April 18, 2022
Is motor copper or alum
For model number Mvw6230hw
PartSelect logo
Hello Joseph, thank you for your question. This motor is not made of copper. There are parts inside such as the field are made with copper, however the outer portion of the motor is not aluminum but a metal such as tin or a steel substrate. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.

Was this helpful?
Thank you for voting!
  • 1
  • 2
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738839
Manufacturer Part Number: WP21001950
Brand
Model Number
Description
Admiral
AAV1000AWW
Washer - Residential
Admiral
AAV1100AWW
Washer - Residential
Admiral
AAV3000AWW
Washer - Residential
Admiral
AAV4000AWW
Washer - Residential
Admiral
AAV7000AWW
Washer - Residential
Admiral
AAV8000AWW
Washer - Residential
Admiral
AAV8005EWW
Washer - Residential
Admiral
AAV9000AWW
Washer - Residential
Amana
ALW221RJW
Washer - Residential
Magic Chef
CAV1000AWW
Washer - Residential
Magic Chef
CAV1004AWW
Washer
Magic Chef
CAV2000AWA
Washer - Residential
Magic Chef
CAV2000AWQ
Washer - Residential
Magic Chef
CAV2000AWW
Washer - Residential
Magic Chef
CAV2004AWW
Washer - Residential
Magic Chef
CAV2005AWW
Washer - Residential
Magic Chef
CAV4000AWA
Washer - Residential
Magic Chef
CAV4000AWW
Washer - Residential
Magic Chef
CAV4004AWW
Washer - Residential
Crosley
CW5000A
Washer - Residential
Crosley
CW5000W
Washer - Residential
Crosley
CW5500W
Washer - Residential
Crosley
CW6000A
Washer - Residential
Crosley
CW6000Q
Washer - Residential
Crosley
CW6000W
Washer - Residential
Crosley
CW6500Q
Washer - Residential
Crosley
CW6500W
Washer - Residential
Crosley
CW7000A
Washer - Residential
Crosley
CW7000Q
Washer - Residential
Crosley
CW7000W
Washer - Residential
Customer Service Representative

Get in touch, we're here to help!

Monday to Saturday
8am - 9pm EST

Contact Customer Service