Sold individually. Lock washers are used with screws when vibration from an appliance may cause the screw to loosen. Lock washers are also used in the electrical components of an appliance to ensure an electrical connection is not lost.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Range, Dishwasher, Wall Oven, Ice Maker.
This part works with the following products:
Whirlpool, Kenmore, Jenn-Air, Maytag.
Part# WP179051 replaces these:
AP6005652, 04100269, 179051, 3196161, 3400037, 5-80023, 580023, 60001127, 7-7346, 7-8764, 707346, 708764, 7101P263-60, 7101P381-60, 74002059, 9-10832, 9-12623, 910832, 912623, JA99708764
...
Show more
, Y04100269
Show less
Customer Repair Stories
Average Repair Rating: 4.0 / 5.0, 7 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Oven door was distroyed and dirty from previous owner
I dismounted the oven door following the graphic templates that this site has for that model. Then I replaced the gasquet (seal window), appliying an apoxic glue to hold it on place. Then I started to put it togueter, from the bottom to the top, first the lower trim, I screwed it back to the metal frame, then the left and right trims, it goes tied by pressing it to the sides, after that I installed the top and screwed it to the frame. It holded all toguether cery well. My oven looks like new now.
After searching on the internet for a very long time, we were almost ready to order the screws "blind" (no picture) from Sears for almost $10.oo per screw. Then I stumbled onto this website and found exactly what I was looking for, with a detailed description AND a picture!! Not to mention a price that was two thirds less than Sears..for TWO screws. Now the oven door is secure and we are no longer on our search for the right screws.
Other Parts Used:
donna from baltimore, MD
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
13 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My oven door handle broke
I removed the screws from the top of the door, the sides and the bottom of the door. I still couldn't get the door to come apart because there were screws on the inside. It took me about 10 minutes to figure out that I had to slide the glass plate off the front of the door to get at the screws on the inside. Once that was done, I was able to replace the handle without problem. The only other thing is that I cut the top of my index finger while trying to clean the door before I put it back together. I was careful to keep track of which screws went where because otherwise it would get confusing. My handle looks and works great! Thanks
the screw came out of the oven door and the snapped the side molding in half
Well I had my oven door ducked taped together. I Am a 51 yr old female and I laid on the floor on my back to see if I could get the rest of the molding out without having to take off the entire oven door. I was able yo pop out the rest of the broken molding. I wasn't able to snap in the put it under the front of the oven door hold it together and screw in my new screw on the inside of the oven door. IT WORKED!! If I can do this so can you.
It was worth the money for that little screw, since I didn't have to run all over trying to find the right one.
Other Parts Used:
Frances from palm beach gardens, FL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
1 of 4 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door handle broken on one side
well relatively easy, I removed the oven door, took off broken and worn parts. Cleaned door, because it needed it, installed new parts and everything thing fitted perfectly. Thanks for having what I need on hand. The prices were good as well. I will be purchashing from you again. Thanks.
Ask our experts a question about this part and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack
January 30, 2018
Looking for screws for the following model listed above for the oven door handle. It is a Whirlpool range.
For model number RF361PXKT
Hello Jack, Thank you for your inquiry. The part number for the door handle screws for this model is WP3196164. Hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Lisa
December 7, 2021
The front part of the door and handle are intact, will this screw connect the outside cream part of the door to the inside gray part of the door? Thanks for your help
For model number gR478lxpt0
Hi Lisa,
Thank you for your question. Yes, this screw will secure the inner door panel to the rest of the door. They are sold individually. If you would like to place an order for them, you may order them either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
May 6, 2023
Need oven door inside top corner screw is this it PS11738704 it?
For model number RF365pxgq0
Hello Richard, Thank you for your inquiry. This is the screw that attaches the liner to the rest of the oven door. We hope this helps.
Was this helpful?
Thank you for voting!
Monday
September 9, 2019
I'm trying to find which screw is the correct one for the oven door handle. One of the black screws came out, and i'm not sure what's the part number for it to get another on.
For model number RF365PXMW
Hello Monday, thank you for your question. The oven door handle screw is Part #: PS11740978. Please enter the part number into the site for current price and availability. Good luck with your repair!
Was this helpful?
Thank you for voting!
SHARON
July 20, 2017
The handle on my Maytag range broke off on the one end. We are trying to get the handle completely off so we can take off that part that contains the vents. We want to try and replace that bolt or screw. The handle itself is ok, just someone leaned on it hard and it broke the bolt thing so handle is not fastened on that right side.
For model number MER 57750AW
Hi Sharon. Thanks for reaching out to us. If you are simply looking to replace that screw, you have the correct part number, and you can find it on our website by searching PS11738704. If the handle is still fine, you can simply replace the screw and it should solve your problem. Best of luck with your repair.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
