Maytag/Maytag_Thumb/29301.gif
See part 62 in the diagram
( Grid squares measure 1x1 inch )

Get in touch, we're here to help!

Open until 12am EST

customerservice@partselect.ca

Freezer Door Gasket

★★★★★
★★★★★
5 Reviews
$130.09   In Stock

Get this part fast! Average delivery time for in-stock parts via standard shipping: 1.8 days.

 Fits your 59661103100!
 Fits your 59661103100!
PartSelect Number PS11738527
Manufacturer Part Number WP12550116Q
Manufactured by Whirlpool
Product Description

Freezer Door Gasket Specifications

This freezer door gasket is white and made of rubber. It measures approximately 23-3/4 inches wide by thirty-one and a half inches long.
How Buying OEM Parts Can Save You Time and Money play video

How Buying OEM Parts Can Save You Time and Money

Troubleshooting
This part fixes the following symptoms:
Door Sweating | Freezer section too warm | Frost buildup | Leaking
This part works with the following products:
Refrigerator.
This part works with the following products:
Amana, Whirlpool, KitchenAid, Kenmore.
Part# WP12550116Q replaces these:
AP6005478, 10456810, 10456810Q, 10456838, 10456838Q, 10456860, 10456860Q, 12529016, 12550116, 12550116Q, 4344354, 8170398, 8170510, 8170633, 8170646, 8170655, Y10456838Q
Questions and Answers

Ask our experts a question about this part and we'll get back to you as soon as possible!

9 questions answered by our experts.
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
January 2, 2020
I am looking for a freezer door seal for the above model. Which one will work?
For model number Bg20t2w
Hello John, thank you for your question. The freezer door seal for this unit is PartSelect Number PS11738527. Please enter the part number into the site for current price and availability. Good luck with your repair!

1 person found this helpful.

Was this helpful?
Thank you for voting!
Arlene
February 3, 2020
I just want to make sure this gasket will fit my model.I found one through amazon but it has a california 65 warning. Does this one? Thank you
For model number Amanda freezer BZ22RW
Hello and thank you for writing. Freezer door gasket black # PS11738515. Freezer door gasket white # PS11738527. As these are OEM sourced parts directly from the manufacturer we are not aware of any California 65 warning for these gaskets. We hope this helps. Please contact us anytime if you require further assistance.

1 person found this helpful.

Was this helpful?
Thank you for voting!
Alejandro
August 26, 2021
I'm looking for the freezer door gasket, (it's below the refrigerator)
For model number BC20TL
Hello Alejandro, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738527. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Kristen
November 29, 2021
Could you confirm that this is the correct replacement gasket for freezer door on my AMANA fridge over freezer
For model number DRB2101AW
Hello Kristen, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11738527. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Edwin
December 16, 2021
Does this take a technician to install?
For model number KRFM706ESS00
Hello Edwin, Thank you for the question. This will depend on who is doing the repair, however most customers have been able to install the Gasket on their own. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Was this helpful?
Thank you for voting!
Neil
October 16, 2022
what is the correct part number for a kitchenaid freezer door gasket white in color?
For model number KBFO42FTX03
Hey Neil, thank you for reaching out. We have researched the model you have provided and have found the part number for the white door gasket is PS992921. We hope this helps! If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.

Was this helpful?
Thank you for voting!
Related Parts:
Leanne
December 14, 2022
Need to replace bottom freezer door gasket. Ice is building up ... What part number will fit this freezer door?
For model number WRF989SDAH00
Hello LeAnne, thank you for asking. Based on our research, the gasket, part number PS10062200, will fit your model. It is used to make an air-tight seal for the cabinet when the door is closed. Please reach out to customer service if you need help placing an order, anyone will be happy to assist you. We hope that helps.

Was this helpful?
Thank you for voting!
Related Parts:
Tina
July 23, 2019
Does ps11738527 fit the Kenmore pullout freezer drawer? I don't see that brand/model number listed under the immediate gasket, even though your site took me to your gasket.Thank you.
For model number Kenmore 59671103101
Hello Tina, thank you for your question. Yes, the gasket PartSelect Number: PS11738527 is compatible with your specific unit. I hope this helps!

Was this helpful?
Thank you for voting!
Shaker
September 20, 2019
Does this model fit my freezer?
Hello Shaker, thank you for contacting us, In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. Look forward to hearing from you!

Was this helpful?
Thank you for voting!
Customer Repair Stories
 Average Repair Rating: 3.0 / 5.0, 48 reviews. What's this?
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
freezer door gasket needed replacing
Unplug refrigerator. Open freezer door. Lift the old gasket from the edge closest to the center of the door to expose the hex-head screws. Get a nut driver the appropriate size (1/4" if I remember) and loosen, but do not remove all of the screws. Once loosened, the old gasket can be removed. Slip the new gasket in just like the old one was. Lift the edges closest to the center of the door and tighten the screws. Test the fit of the new gasket by closing the door and sighting carefully down each of the four seal lines. Typically there will be spots where there are gaps, that is, the gasket is not "pulled out" enough to contact the refrigerator body. This is due to kinks that occur to the gasket during shipping. A paper that comes with the gasket notes the effect and recommends using a hair dryer to remove the kinks. Although the recommendation is to use the dryer BEFORE putting the gasket on, I used the dryer after, when I could see exactly where the gaps were. After noting the spots, open the door and with the dryer on HIGH setting, wave the hot air stream back and forth for a minute or two on each spot. Pull each spot out by hand with the hot air off and if/when the gasket is cool enough to touch but still warm. Close the door, inspect and repeat the process if necessary. I was able to achieve a good seal all the way around this way.
Other Parts Used:
  • Jeffrey from Palo Alto, CA
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver, Screw drivers
137 of 152 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Gaskets deformed, leaking
The pro's esimate was over $500 for this one... It's very helpful to have a power tool screwdriver/nut driver. Loosen up the screws (#8 x 1/2" hex-head screws on mine) which hold the gasket in place. These screws also hold the plastic inner-portion of the refrigerator door in place. On my fridge, the parts of the gasket at the top and bottom closest to the hinge had progressively become deformed, perhaps because the outer part of the plastic was not holding the gasket in place hard enough (in these locations, I improved the clamping action by removing the screw and adding a #10 washer). In many locations, the screws turned out to have been driven in hard enough to strip the metal, so a hardware store run was needed to purchase #10 x 1/2" screws - be warned. Before trying to mount the gasket, I worked it over with a hairdryer on the floor (used an old towel to protect floor), to get out the worst of the kinks, then mounted it on the door, tucking the bead between the inner and outer door all the way around. This can be hard enough that if you do have a power tool nut driver, it may be preferable to completely remove the inner door portion, mount the gasket, then screw it back in place. Once the screws are tightened, use the hairdryer to soften the areas which don't contact properly, working on the gasket with your fingers and/or by repeatedly opening and closing the door, until you have smooth contact all the way around. I did not remove the doors completely, simply stowed the freezer compartment stuff in an ice chest, and used cardboard to close the main refrigerator compartment.
Other Parts Used:
Refrigerator Door Gasket
  • david from Creve Coeur, MO
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Nutdriver, Screw drivers
46 of 50 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice building around door and on mullions, gasket deformed
Other stories I've read here speak to difficulty of changing a gasket with the door on the appliance. Whoa! Take the door off, tape cardboard over the opening, lay the door on its back and proceed. You will avoid racking or twisting the door and having the new gasket fit worse than the old. You can also thaw ice which often forms inside a door over time. Reinstall the door taking pains to shim properly so the new gasket is not overcompressed or allowing a gap. A dollar bill is a good gauge. It should resist a bit as it is pulled out after closing the door on it. This was not exactly step-by-step, just offered as advice from a whole bunch of experience.
Other Parts Used:
  • David from Emporia, KS
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers, Socket set, Wrench set
28 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
The gasket was worn and the freezer door had a poor seal.
I removed all the food items from the door. I removed the old gasket by loosening up the screws at the top of the door. The rest of the old gasket pulled out easily from the rest of the door. While the gasket was off, I took the time to clean up the door. I startede at the top of the door, loosening up the screws but not removing them. I then replaced each side of the door seperately. I found it helpful to have a flat blade to help poke the gasket into place. Because I was in the kitchen, I used a metal spatula. The corners were the trickiest. Using a hand held hair dryer helped to soften the gasket when it became cold. The freezer and fridge have good seals now and the refrigerator is good as new.
Other Parts Used:
Refrigerator Door Gasket
  • Kay from Nashville, IN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Socket set
21 of 23 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Worn Gasket, Fridge looked like Antarctica
Very easily removed the nuts holding the gasket to the door. Previously took new gasket from packaging and used a hair dryer to smooth the wrinkles from it, about 5 minutes. Installed the new gasket and adjusted the seating of the actual freezer door, for a proper fit. Now there is no snow in my freezer and the poor compressor only kicks on maybe ten times a day, as opposed to most of the day. Not to mention what the savings in electricity may be and extended life for my Amana. Should have done this two months ago. Service and shipping from Parts Select is second to none, with a website interface that makes sense- try most of the other online retailers and you will know what I mean.
Other Parts Used:
  • daniel from wyoming, OH
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Nutdriver
12 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Torn Freezer Door Gasket
First I removed all the screws with the exception of the top row, these I just loosend.I made sure how the old one was installed before I removed it.I then used a hair dryer on the new one briefly to take out the shipping kinks.I removed the old one and put the new one in with a little adjusting as i went. I then put all the screws back in,adjusted it a little more and finished by snuging up all the screws.It was very easy and works like new.
Other Parts Used:
  • Daniel from Toledo, OH
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
10 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
bad sealing door gasket
1st remove the gasket from the packaging & let it get to room temperature . 2nd use a hair dryer to get it in shape . 3rd cut out a piece of the box that the door gasket was delivered in to cover the freezer opening after you remove the door,4th(remove the door by removing the bottom hinge) 5th put the door on a table to remove the old gasket with a screw gun,(now is a good time to clean the door up) after the old gasket & panel was removed I found the insulation inside the door panel frozen solid so I replaced it .If you don't replace this fiberglass insulation or a least try to thaw it out you defeat the purpose of the doors insulations R value. 6th replace the gasket (replace the gasket the same way that you removed it) 7th put the door back on the freezer.You don't have to remove the freezer door to do this job but it makes a much neater job & a better seal when the door is closed. This isn't the 1st door gasket I replaced so I kind of knew what I was doing.Good Luck
Other Parts Used:
  • Robert J. from Haddonfield, NJ
  • Difficulty Level:
    Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door Gaskets askewed and needed replaced
I hired someone to do this, but after watching him do it, this is an easy job. Amana made a smart refrigerator and it's easy to do your self. I saved a LOT of money buying the parts here and I should have attempted it myself. The trick is heating up the gasket once it was mounted and then when you had a tight seal to the door, tape the door shut and LEAVE it as many hours as you can (minimum of 4, but overnight better).
Other Parts Used:
Refrigerator Door Gasket
  • Lin from Anchorage, AK
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver, Screw drivers
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
door seals were badly distorted and did not seal in cold temperatures very well
I removes all food and drink items from the refrigerator and freezer doors. I then removed all of the screws holding the inner panel of the refrigerator door to the door itself. The old gasket could then be removed. I placed the new door gasket in place around the inner panel and reinstalled the inner panel with new gasket onto the refrigerator door. I then removed the inner panel from the freezer door and then removed the old gasket. I placed the new door gasket in place around the inner panel and reinstalled the inner panel with new gasket onto the freezer door. I used a portable drill with a 1/4 inch nut driver to remove and reinstall the many screws that held the inner panel and gasket on the doors.
Other Parts Used:
Refrigerator Door Gasket
  • victor from cheektowaga, NY
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Nutdriver
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
the seal on the gaskets were broken
Soaked the gaskets in bathtub to make them more pliable. They laid flatter and were easier towork with,
Other Parts Used:
Refrigerator Door Gasket
  • Barbara S. from Hendersonville, TN
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Screw drivers
6 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer Reviews
Average Rating:
★★★★★
★★★★★
5 Reviews
5.0
Filter By Rating:
  • 5 Stars
    5
  • 4 Stars
    0
  • 3 Stars
    0
  • 2 Stars
    0
  • 1 Star
    0
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Related Parts
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11738527
Manufacturer Part Number: WP12550116Q
Brand
Model Number
Description
Amana
59661102100
Refrigerator
Amana
59661102101
Refrigerator
Amana
59661103100
Refrigerator
Amana
59661103101
Refrigerator
Amana
59661104100
Refrigerator
Amana
59661104101
Refrigerator
Amana
59661109100
Refrigerator
Amana
59661109101
Refrigerator
Amana
59661142100
Refrigerator
Amana
59661142101
Refrigerator
Amana
59661144100
Refrigerator
Amana
59661144101
Refrigerator
Amana
59661152100
Refrigerator
Amana
59661152101
Refrigerator
Amana
59661154100
Refrigerator
Amana
59661154101
Refrigerator
Amana
59661162100
Refrigerator
Amana
59661162101
Refrigerator
Amana
59661164100
Refrigerator
Amana
59661164101
Refrigerator
Amana
59661272100
Refrigerator
Amana
59661272101
Refrigerator
Amana
59661273100
Refrigerator
Amana
59661273101
Refrigerator
Amana
59661274100
Refrigerator
Amana
59661274101
Refrigerator
Amana
59661279100
Refrigerator
Amana
59661279101
Refrigerator
Amana
59661282100
Refrigerator
Amana
59661282101
Refrigerator

Get in touch, we're here to help!

Open until 1am EST

Contact Customer Service