See part 7 in the diagram
( Grid squares measure 1x1 inch )
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 9pm EST
Dryer Timer Knob WE01X24552
$25.71
Special Order
Does this part fit my model?
Need help finding your model number?PartSelect Number
PS11736611
Manufacturer Part Number
WE01X24552
Manufactured by
GE
Troubleshooting
This part fixes the following symptoms:
Timer Not Working | Won’t Start
This part works with the following products:
Dryer.
This part works with the following products:
General Electric.
Part# WE01X24552 replaces these:
AP6026722
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Tanya H - May 22, 2021
Verified Purchase
Did not work
A picture would have been helpful. The part was too big.
Tisha B - December 3, 2021
Verified Purchase
Ordered a timer knob for my dryer
Not the right part at all.
December 4, 2021
Hi Tisha,
Thank you for your review. Please accept our apologies for this situation. We will be in touch with you shortly regarding your order.
- < Prev
- 1
- Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 20 reviews.
What's this?
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Dryer timer very hard to turn resulting in a stripped knob
My GE electric dryer timer became very difficult to turn and eventually stripped the knob. First I unplugged the dryer. Then removed the upper back panel exposing the timer. There is only one small allen screw plus built in slots holding the timer. There are many wires connected to the timer so I took a picture just in case. I removed the timer and let it hang by the wires. I then pulled one wire at a time and reattached it to the new timer. All went well and the dryer works like it was new again. The most difficult thing was replacing the small screw holding the timer. I then replaced the back panel and attached the new knob. There’s no need for a professional repair person for this problem. From start to finish was less than 30 minutes.
Other Parts Used:
-
Jerry from ST JOHNS, FL
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Wrench set
14 of 16 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer wouldnt work
Dryer wouldnt work. I was out of town when dryer stopped working. My grandmaother, who I live with, had brother came over to troubleshoot. He spent a good amount of time and couldnt figure out the problem.
When I returned home I tried it and immediately knew the knob was stripped because it didnt make the clicking noises. I verified by seeing where flat section was, then turning with knob and then seeing if flat section moved. Ordered new knob. Pulled old one off and put new one. Worked like a charm
When I returned home I tried it and immediately knew the knob was stripped because it didnt make the clicking noises. I verified by seeing where flat section was, then turning with knob and then seeing if flat section moved. Ordered new knob. Pulled old one off and put new one. Worked like a charm
Other Parts Used:
-
Alicia from METAIRIE, LA
-
Difficulty Level:Very Easy
-
Total Repair Time:30 - 60 mins
10 of 12 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer slowly stopped work and dryer wasn’t cutting on
Removed the timer knob, removed the back panel, removed the timer and installed the timer and knob.
Other Parts Used:
-
Ashley from CULPEPER, VA
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
DRYER TIMER KNOB WOULD NOT MOVE....CRACKED THE KNOW
REMOVED BACK COVER
REMOVED THE SCREW HOLDING THE COMPONENT TO THE FRONT
TOOK PHOTO OF HOW THE COLOR WIRES CONNECT
REMOVED THE WIRE (TOOK THE LONGEST, HAD TO USE NEEDLE NOSE PLIERS TO BREAK THE TAB FEMALE TAB LOCKS.
RE-WIRED THE NEW CONTROL
PUT PLATE BACK ON
DRY NOW RUNS AS INTENDED
REMOVED THE SCREW HOLDING THE COMPONENT TO THE FRONT
TOOK PHOTO OF HOW THE COLOR WIRES CONNECT
REMOVED THE WIRE (TOOK THE LONGEST, HAD TO USE NEEDLE NOSE PLIERS TO BREAK THE TAB FEMALE TAB LOCKS.
RE-WIRED THE NEW CONTROL
PUT PLATE BACK ON
DRY NOW RUNS AS INTENDED
Other Parts Used:
-
James from DOUGLAS, GA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Pliers, Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
timer control locked down, knob was broken trying to turn
took 6 screws 0ut of cover plate,removed wires one at a time and replaced on new part(timer) removed retaining scres turned 1/4 turn removed--replaced in reverse manner
Other Parts Used:
-
Charles from WALHALLA, SC
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
5 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dryer timer knob
Dryer knob was not clicking on timer. Took knob off &saw that was a crack in it. Looked up model #&went on your website&ordered the same knob. Received quickly. Put the new knob on &itworked.Just had to line up 2 flats parts on knob & dryer.went right on.
Other Parts Used:
-
Pamela from BUFFALO, NY
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replaced timer
Very good. Really only one screw holding the timer in place. It was a little difficult finding the right tool to use to remove that screw. But, once found, it was a easy as pie!
Other Parts Used:
-
Gail from MONROE TWP, NJ
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
old timer knop cracked
stuck new knob on spindle.
Other Parts Used:
-
Michael from MILLEDGEVILLE, GA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
4 of 4 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Timer knob would not turn, caused the knob to break.
Remove two screws on the back of dryer that hold the Control panel on. The panel is hooked on to the dryer so carefully remove that. The timer knob has several wires hook into it so take a picture for reference. Remove the screws, remove and install new timer. Now transfer the wires over to the new timer one at a time to avoid confusion. Reinstall the the control panel.
Other Parts Used:
-
matthew from HUDSON, IA
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Pliers, Screw drivers, Socket set
4 of 5 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Defective timer. Wouldn't advance (turn)
-
Michael from GLEN ALLEN, VA
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Nutdriver, Screw drivers
3 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Stacy
February 5, 2018
What does this knob assembly come with.. the knob on my dryer stopped turning an when i took it off this little metal piece came out.. i believe it helps turn the dial. because when i just put the cap on with out it..
For model number GTD42EASJ1WW
Hi Stacy, Thank you for the question. This is the knob and the small D shape clip that fits into the back of the knob. Hope this helps!
14 people found this helpful.
Was this helpful?
Thank you for voting!
Linda
August 9, 2019
The dryer knob does not make a clicking noise anymore. When i turn the knob it is does not feel as tight. The dryer will not turn on when i push the button.
For model number GTD45EASJ2WS
Hello Linda, thank you for contacting us. This sounds like a faulty Timer part number PS11759041. You may also want to consider the Push-to-Start Switch part number PS3487190 for your model. I hope this helps and good luck with your repair!
9 people found this helpful.
Was this helpful?
Thank you for voting!
Jim
October 6, 2021
THIS IS THE SECOND TIME, I'VE REPLACED THIS KNOB. THEY CRACK, AND THEN WON'T TURN. I'VE THOUGHT OF HAVING A PAIR OF PLYERS PERMANTELY AFFIXED TO THE CONTROL TO TURN ON THE DRYER. I'M ORDERING EXTRAS TO HAVE A SPARE.
For model number GTD33EASK0WW
Hello Jim, Thank you for reaching out to PartSelect.com. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Kat
October 11, 2021
My dryer stopped working, the timer knob just turns and doesn’t click and even my start button doesn’t work? What do you suggest?
For model number GTD33EASK0WW
Hello Kat, Thank you for the question. This sounds like the Timer Switch is defective and may need to be replaced. If the Cycle is not selected, the start switch will not work to start. We hope this helps!
7 people found this helpful.
Was this helpful?
Thank you for voting!
Wendy
October 6, 2021
The timer knob doesn't' move so the clothes gets too hot for drying!
For model number GTD33EASK0WW
Hello Wendy, Thank you for the question. The Timer Switch behind the knob is what turns the knob. if the knob is not turning, the timer switch will need to be replaced, PartSelect Number PS11763067. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
3 people found this helpful.
Was this helpful?
Thank you for voting!
BRENDA
June 9, 2024
Is the replacement timer equally as difficult to turn as is the original timer?
For model number GTD42EASJ2WW
Hi Brenda, thank you for the question. No, the timer should not be stiff like that. The difficulty in turning the timer could be because of the faulty timer knob or the timer itself. We would suggest checking the timer knob for any damage first. If it is fine, the issue could be with the dryer timer, part number PS11763064. You may need to replace it to fix the issue. We hope this solves your problem!
3 people found this helpful.
Was this helpful?
Thank you for voting!
John
September 22, 2022
My machine do?work. I noticed the timer knob is cracked! Can I just replac this knob and all systems will be go? I think my wife turn this knob too hard because it was hard to turn.
For model number GTD33EASK0WW
Hello John, thank you for your question. Replacing the knob will not disturb any other part or functionality if done correctly. The timer knob, part number PS11736611, is compatible with your model. Please watch the attached video to get an idea about how it is done. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Debra
March 10, 2022
I need the big button that turns it on for the different settings you can pull it off and on it’s A GE Dryer
For model number GTD42EASJ2WW
Hello Debra, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11736611. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Richard
June 3, 2022
this seems like it is striped this dryer is not 2 years old will this fix the problem. the stem is plastic when it should be metal . do i need the stem too?
For model number GTD42EASJ2WW
Hello Richard, thank you for your question. The Stem is part of the Timer PS11763064. The Knob PS11736611 slides on to the stem on the Timer. If there are no damages on the timer, then you just need to order the Knob. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Nolvia
August 24, 2022
The knob assembly broke off with the shaft too. What part or parts are needed.
For model number GTD42EASJ2WW
Hello Nolvia, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS11736611 for the Timer Knob and Part #: PS11763064 for the Timer Switch that has the Shaft. Good luck with this repair!
Was this helpful?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
Related Parts
$27.28
In Stock
Refrigerator Produce Preserver
$27.28
PartSelect Number: PS3503014
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f... 
$16.38
In Stock
Washer Affresh Cleaner
$16.38
PartSelect Number: PS1960673
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets. 
$19.71
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.71
PartSelect Number: PS12345667
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ... 
$29.30
In Stock
$22.38
In Stock
Cooktop Cleaning Cream
$22.38
PartSelect Number: PS12717774
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d... 
$21.75
On Order
Range Cleaner
$21.75
PartSelect Number: PS3492527
Affresh® Dishwasher Cleaner is the #1 recommended cleaner by Whirlpool, KitchenAid, and Maytag brands, designed to remove limescale and mineral build-up that can affect your dishwasher’s performance. These powerful table...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11736611
Manufacturer Part Number: WE01X24552
Manufacturer Part Number: WE01X24552
Brand
Model Number
Description
Get in touch, we're here to help!
1-866-883-8386
Monday to Saturday
8am - 9pm EST