Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ryan M - May 22, 2019
Verified Purchase
Exactly what I needed.
Part was exactly as advertised. Instruction video helped a lot. Total fix time 5 minutes not including glue drying time.
★★★★★
★★★★★
Judy A - February 20, 2019
Verified Purchase
Easy repair. Fast delivery.
My appliance is back in working order. Thanks so much.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.4 / 5.0, 8 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Door Gasket tore out
Put high temperature glue on first, then put door gasket over the high temperature glue and then let it set for 24 hours. It worked fine....
Other Parts Used:
Manolak from MURFREESBORO, TN
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
15 of 15 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door seal busted
I took dryer door off, put on a flat surface, used pliers to pull old seal off, use a brush to clean any remaining fibers, applied adhesive & let it dry for minute or two til tacky then install seal, let dry for 24hrs, put dryer door back on & done.
Take the door off of the dryer. Lay it on a towel. Remove old gasket. Clean the channel the door gasket fits into with glue remover. Squeeze high temperature glue into the channel, let the glue set up. Put the new gasket into the channel, tape it down in a few places. Let it sit 24 hours for the glue to set up. Put the door back on. You can put the door on immediately as long as you don't use the dryer for 24 hours. Easy.
Other Parts Used:
Kenneth from N RIDGEVILLE, OH
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
wore out gasket
removed old gasket took door off 4 screws. cleaned seal area applied glue put on gasket easy
Other Parts Used:
diora from ROCKFORD, IL
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Replacing gasket on dryer door
Ripped out the rest of the old gasket, applied glue, applied gasket, let dry.
I would point out that the adhesive says not to use around heat-producing products. And this was on a dryer. The instructional video never mentioned how long it took the glue to dry so that it could be restored. Just said, "until it dries.'
Simply remove the door, clean out any remaining gasket and loose glue. Apply a layer of high temp adhesive and quickly stretch the gasket and stick it in the glue. Let it dry overnight, remount the door and you are done.
Removed old seal and replaced with new one. Save yourself time and get some acetone to remove old glue works great!
Other Parts Used:
Joseph from NEOSHO, MO
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Seal damage
Very simple remove door pull off old seal, apply small amount of adhesive around seal seat. Install seal to door let cure for several hours over night is best
Other Parts Used:
Vincent from RAYMOND, MS
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
1 personfound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gerald
August 11, 2017
Received my door seal.I did not receive either the instructions or the adhesive to mount the seal what do I use to bond the seal to the door. Where can I get it .
For model number MGDx655DW0
Hi Gerald,
Thank you for the questions. We recommenced the High Temperature Adhesive. Once you remove the old seal and clean any old glue from the channel the seal will fit into, you can squeeze the glue around the door into the channel and wait a min then line the seal with the glue and neatly press the seal down working around the door.
Hope this helps!
I purchased a door seal - part w10861521-- what adhesive does this require... please provide me a part number
For model number MEDC215EW0
Hello Wayne, Thank you for contacting us. I have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11757492. Thank you for your inquiry, good luck with this repair!
It takes 4 or 5 times to dry a regular load of clothes? Dryer heats but not enough to dry on 1st cycle
For model number MEDC200XW3
Hello Shawn, Thank you for the question. I suggest testing the Internal Bias Thermostat PartSelect Number PS11741405 and the thermostat and fuse in the Thermal Cut Off Kit PartSelect Number PS334299 with a multi meter to check the continuity. Hope this helps!
Does this door gasket fit my model? Medc215ew1
Thanks
For model number MEDC215EW1
Hello and thank you for writing.
No, but seal # PS11773177 is in the list of compatible parts for your model number. This front panel seal kit doesn't include the plastic retainers, reuse the old retainers. No glue is needed, the seal stretches to fit. We hope this helps. Please contact us anytime if you require further assistance.
This is replacement high temperature adhesive for your washer and dryer. It is designed to hold objects together, and will not disintegrate at a high temperature. This is a 2-ounce tube of adhesive that is sold individua...
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
This solid element restorer is for ranges and cooktops. Solid element restorer restores and protects solid elements from rusting and spotting. Follow the instructions on the label when using this product.
This low-odor gel, easily cleans away tough burnt-on deposits at room temperature. Apply the gel evenly on the cooled oven surface. Leave the gel to set overnight then wipe away with a clean cloth.
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Model Cross Reference
This part works with the following models:
PartSelect Number: PS11731610
Manufacturer Part Number: W10861521