If your dishwasher is failing to start, not completing cycles, or showing issues with water filling or heating, the electronic control board may be the source of the problem. Acting as the appliance’s central operating system, this component governs all major functions—from activating the wash motor and heating element to managing the timing and sequence of each cycle. Replacing a faulty board can restore responsiveness and ensure your dishwasher runs efficiently. Always disconnect power before installation and follow safety guidelines to protect yourself during the process.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Ginette R - September 26, 2021
Verified Purchase
Easy Repair - Part Worked to Fix Problem
The entire process was pain-free. My dishwasher part was delivered to my front door in 3 working days! The part was well package. Since installation, my dishwasher is working again! Thanks for the excellent service.
★★★★★
★★★★★
Sylvain M - October 25, 2022
Verified Purchase
Master controle
Perfect fit
★★★★★
★★★★★
Rick M - October 7, 2019
Verified Purchase
Easy ordering, quick delivery
The part arrived very quickly and was a perfect replacement.
★★★★★
★★★★★
Patrick C - January 3, 2019
Verified Purchase
Très bon service,livraison rapide.
Très bon service livraison rapide.
< Prev
1
Next >
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
14 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joy
May 20, 2019
My dishwasher seems to go through an entire cycle but it does not distribute the soap at all.
For model number KDFE104DWH0
Hello Joy, Thank you for the question. If the dispenser is not opening and allowing the soap to dispense it is a indication the motor on the back of the dispenser is defective. The motor is not sold on its own so the dispenser, PartSelect Number PS11773088 will need to be replaced. You can use a multi meter to test the motor and check for continuity. If the motor is good, you may have a defective control board. Hope this helps!
Hello Nick, thank you for your question. There are a few parts you will need to test to determine what the issue is. If the water is not going through the spray arms, there are some parts that you will need to check to see which one is causing the issue. You will need to check the filter, the turbidity sensor, spray arms (for any debris stuck in the holes) and the diverter motor. I hope this helps. Thank you and have a great day!
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
December 26, 2017
Our doesn't dry the dishes anymore. This problem just occurred in the past few days. Is it likely that the heating element went bad or is there a temperature sensor that has failed? I could not find a senor in the parts lists. Thanks for your assistance.
For model number KDFE104DBL1
Hi David, Thank you for the question. You can try to teat the Thermostat, PartSelect Number PS11750035 for continuity. If the thermostat tests good you will need to replace or test the elements its self. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
JOE
February 8, 2018
My dishwasher doesn't heat the water, it is warm. It doesn't dry the dishes even though it indicates it is drying. After dishwasher cycle is done the sanitized light on the front panel flashes. We rep[laced the heating element and it didn't fix the problem. What is the problem?
For model number KDFE104DBL2
Hello Joe, thank you for your question. I would suggest testing the thermostat part number WPW10195091 to see if that is faulty before replacing the board. If the thermostat is testing 0 ohms at room temperature, the part is not bad, and then the board should be replaced. I hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Donna
February 19, 2018
When I go to start to wash the dishes it goes in control lock mode - cannot cancel it out.
For model number KDFE104DWH0
Hi Donna, Thank you for the question. The appliance may need to be reset. You will need to turn power off to the appliance for 5 mins and then plug it back in. Hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Anthony
August 30, 2022
Sometimes wash cycle works fine. Once in a while machine stops after soap dispenser opens up... on occasion draining and restarting may work....
New Cntrl board?
For model number jdb9000cwp2
Hello Anthony, thank you for asking! Most of the time an old and weary thermostat (part number: PS11750035) can also cause this problem, so before moving toward the control board check the thermostat for continuity using a multimeter. Please feel free to reach out to customer service for any further assistance.
Control panel works fine, machine will start but often shuts right down when water intake starts; can restart like normal through control panel, sometimes runs 5-10 minutes and I restart, sometimes goes through complete cycle: Was looking at control module W10854215? Any suggestions
For model number JDB9000CWS2
Hello Keith, thank you for your inquiry. Yes, you are correct. You have a faulty Electronic Control PS11731265. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Charles
March 14, 2019
Does not heat changed element still not heating
For model number KDFE104DSS1
Hi Charles, thank you for your question. You may want to then double check your thermostat to see if that part is working correctly. You may also want to take a look at your wiring as well as perhaps being the issue. If those parts are fine then perhaps you may have to look into your control board being the issue. I hope that helps. Good luck with your repair.
The control panel is totally unresponsive. Have powered on/off multiple times. Have tried to reset control panel by the button sequence (high temp wash then heated dry 5 or more time) with no luck. Is it the control panel or the cntrl-elec which is bad? One of the lights in the control panel (prowash) is dimly lit. When the power is cycled, the blue "washing" light comes on for a few seconds then goes off. Thanks for the help
For model number KDFE104DBL2
Hi Sanjit,
Thank you for your question. If the control panel is unresponsive, you will need to check both the control panel and the electronic control board to see which one is causing the issue. You will need to test the parts with a multimeter. Here is a link to one of our videos on YouTube that you may reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Steve
November 8, 2018
Detergent door is opening late in the cycle. I think i need a replacement timer, what do you think and what part number is that?
For model number kdfe104dss2
Hello Steve, thank you for your question. The most likely issue is the dispenser itself. There is a wax motor on the back of the dispenser that opens the cover to dispense the soap. This motor can malfunction and delay the opening of the dispenser cover. We would recommend replacing the dispenser itself. Part number W10861000. I hope this helps!
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Having a problem with a funky-smelling washing machine, or one that just doesnt seem to clean your clothes as well as it used to? Say hello to the Affresh Washing Machine Cleaner by Whirlpool. This powerful washing helpe...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Circuit Board or Touch Pad","title":"Circuit Board or Touch Pad","url":"/Dishwasher-Circuit-Boards-and-Touch-Pads.htm"},{"position":2,"name":"W10854215","title":"W10854215","url":""}]
