Ask our experts a question about this part and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
May 22, 2019
After i heard the exploision, my microwave have no heat. I replaced the fuse, still have no heat ! Do i need to replace the capacitor or something else
For model number WMH 32517AW2
Hello John, thank you for inquiring. For this symptom you will want to replace either the 3 Terminal Door Switch part PS10057151, the Diode part PS3654932, or the Magnetron part PS11703077. We hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Eric
July 16, 2019
I have kitchen aid microwave with the model number above. Everything seems to run fin except it doesn't heat. Fuse seems good and i replaced the 3 position door switch. Inside the microwave on the ceiling of it there's a plastic peace that seems to have a hole melted threw. Is this the next part i need to install.
For model number KMHS120ESS-3
Hello Eric, thank you for inquiring. Beside the Fuse and Door Switch, you may want to consider either the Capacitor part PS11731152 or the Diode part PS12584264 for your model. The part you are referring to that appears to be melted sounds like the Air Diverter part PS8759519 on your model. It is not indicated that this part would cause the microwave to not heat. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Gary
October 14, 2019
No display, lights, or heat. Replaced fuse and everything appears to work until I press "start", and fuse blows again. Could this part be the cause? Thanks!
For model number WMH1163XVQ1
Hello Gary, Thank you for the question. This could be caused by a defective Capacitor but, I also suggest testing the door switches PartSelect Number: PS10057151, PS2361111 and PS2361113. If defective they can cause a short and blow the fuse or flip a breaker. When working with a microwave please be sure to discharge the Capacitor as they can hold a dangerous charge even when the appliance has been unplugged for several hours. Hope this helps!
My microwave stopped working,after plugging it out then back in the lights would come on but when starting it would shut completely off. Tried replugging again but nothing at all now. Does this sound like the capacitor?
For model number WMH32519FZ0
Hi Robert, thank you for your inquiry. Based on the description, the issue is with the high voltage diode, part number PS12584264. We would recommend replacing the diode to fix the issue. Glad to be of assistance!
Serial number tr73131106. Everything works (or sounds like it works) except it doesn't heat at all. Ideas?
For model number UMV1160CW3
Hello Kevin, Thank you for the question. There are a few parts you will need to test. If you are not familiar with microwave repair I suggest a repairman. The appliance can hold a dangerous charge even when Unplugged. The Capacitor will need to be discharged. You will need to test with a multi meter the Diode, PartSelect Number PS3654932, Capacitor, PartSelect Number PS11731152 and the Magnetron, PartSelect Number PS11757171. These parts create the heat. Hope this helps!
Hi, I purchase this microwave oven brand new fan works but no heat
For model number WMH32519HZ
Hello John, Thank you for the question. No heat normally means an issue with the Thermostat PartSelect Number PS11764993, Magnetron PartSelect Number PS11757171 or the Diode, PartSelect Number: PS12584264. I suggest testing the parts for continuity to determine what part needs to be ordered for replacement. Hope this helps!
