This is a manufacturer-approved mounting kit for your microwave. This kit is crucial for keeping your microwave securely wall-mounted. This kit does not include the mounting plate itself. This kit comes in handy if you buy your microwave separately from the mounting kit.
How Buying OEM Parts Can Save You Time and Money
Troubleshooting
This part works with the following products:
Microwave, Microwave Oven Combo, Washer.
This part works with the following products:
Whirlpool, Maytag, Amana, KitchenAid.
Part# W10821385 replaces these:
AP5989587, 8206614, W10728970, W10811221
Customer Repair Stories
Average Repair Rating: 3.4 / 5.0, 3 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Demo stove exhaust fan and tile backsplash, install over range microwave, rotate exhaust fan and adjust exhaust plenum.
Whirlpool Microwave was purchased as used item, so installation in a new location required purchase of mounting template, wall bracket, mounting hardware. Granite backsplash cut out using wet/dry diamond blade and Ryobi 6.5 inch saw. Microwave exhaust fan removed and rotated for upward exhaust using modified exhaust plenum from existing stove exhaust hood. Installation of Microwave was the simplest part of the job. All mounting materials worked as required. A list of the materials provided in the hardware mount kit would be helpful, I would not have had to order the top mount screws separately if it was clear that they were included in the kit. Otherwise, no complaints.
Very easy repair because I had no parts for the job. I did not do the repair because PartsSelect keeps sending me the wrong parts and they do not have a human available to solve my problem. To make matters worse they will not refund my money.
I had a cabinet person install new kitchen cabinets and counter top. After the demolition of the the old cabinets, I had to buy new parts for the new instal
I had the help of a handyman, I'm 75 years young but not handy with tools
Ask our experts a question about this part and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Susan
June 26, 2019
Hi, i bought this microwave/hood combo used and need to mount it under a cabinet. Which mounting hardware do i need? Thanks so much!
For model number wmh76719cb0
Hello Susan, thank you for your question. You would need The mounting hardware PartSelect Number: PS11730898 and the mounting plate PartSelect Number: PS12074431. Please enter the part number into the site for current price and availability. Good luck with your repair!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Denny
February 26, 2020
What hard mount, mounting kit do i need for this microwave? Thank u!!
For model number WMH32519FS1
Hi Denny, thank you for your question. This would be your mounting plate: PS12074431, and this would be the hardware for mounting your appliance: PS11730898. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Han
March 13, 2020
Does part number ps11730898 come with all the items shown in this illustration? I think i only need item #6 which is broken
For model number WMH32519CS1
Hello Han, thank you for your question. The Part #: PS11730898 is the mounting hardware kit for the unit to be mounted under the counter. The item # 6 is the vent, and that is sold separately. The grille vent in black is PartSelect Number: PS11755257 the grille vent in white is PartSelect Number: PS3508056 and the vent in bisque is PartSelect Number PS3508071. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Larry
February 16, 2023
I have a 15inch cabinent above where the microwave goes the installer says I need a bump out kit which one do I need or how do I order it
For model number WMH31017HZ
Hi Larry,
Thank you for your question. There is a mounting plate and a hardware kit listed for your microwave.
The part number listed under your model number for the mounting plate is PS12074431. The part number listed for the hardware kit is PS11730898. There is a mounting screw for the mounting plate that is sold separately from the kit. The part number listed for it is PS11744892. You will need two of them. If you would like to place an order for these parts, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
I want to buy this Frigidaire low profile Microwave but it does not come with a mounting plate is part # w11368557, but I think I need the screws as well. Is the hardware package #w10821385? It looks like it is only 6 screws and 2 washers, but it is priced as $83. Is there something else that comes with it?
For model number YKMLS311HBS
Hello Daren, thank you for reaching out. The mounting bracket for your model is part number PS12723957. And the hardware kit you mentioned is compatible with your model and it contains 8 screws, 2 washers, 2 clips, and 1 zip tie. We hope this information helps!
Hi. I bought. an open box kitchen aid 2.0 cu. ft over the range microwave. This item is missing all the hardware for the installation. Can you please help.
For model number KMHS120ESS
Hi Enrique, thank you for the question. The hardware kit for your model is part number PS11730898, and the mounting plate is part number PS12074431. There is a top mounting screw for the mounting plate that is sold separately from the kit. The part number listed for it is PS11744892. You will need two of them. We hope this information helps!
Do I need the mounting plate and template and top mounting screw to install my microwave? I already purchased the installation kit and bracket. I just want to be sure I have everything I need.
For model number WMH31017FW0
Hello Tina, Thank you for the question. The Hardware Kit has everything needed to mount to the wall. If you are mounting from the top into a cabinet, you will need the Top Mounting Screw. The Template is not included with the Hardware or Mounting kit so it is also required. We hope this helps!
