This valve is used for cold water, bleach dispenser and prewash cycles. It has a standard hose fitting inlet with 2 outlets facing 45 degrees to the right and one outlet facing 45 degrees to the left.
How Buying OEM Parts Can Save You Time and Money
Part Videos
Replacing your LG Washer Water Inlet Valve - Cold
Troubleshooting
This part fixes the following symptoms:
Leaking | Water Filling Issues
This part works with the following products:
Washer, Washer Dryer Combo.
This part works with the following products:
LG, Kenmore.
Part# 5220FR2075L replaces these:
AP5986564, 5221ER1003A, AGM73269503
Customer Reviews
Average Rating:
★★★★★
★★★★★
9 Reviews
5.0
Filter By Rating:
5 Stars
9
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Nancy G - March 19, 2024
Verified Purchase
Just as promised!
The part was a perfect fit and my washer no longer collects water in the drum. The video link was an excellent step by step demonstration that aided in our repair. Thank you.
★★★★★
★★★★★
Roger C - February 12, 2024
Verified Purchase
worked great easy
fast delivery time 24 hours packed well
★★★★★
★★★★★
Dave S - September 9, 2022
Verified Purchase
Easy Repairs
The part was in great condition and came fast.Machine is working great.
★★★★★
★★★★★
Hugo L - June 1, 2022
Verified Purchase
Right part, great video, all worked.
Was what I wanted, as advertised. Works great. Feels solid.
★★★★★
★★★★★
Robb S - February 11, 2022
Verified Purchase
Very Easy Repair
Part was shipped and received very quickly. Watched the video and made the repair very easy.
★★★★★
★★★★★
ADRIAN L - September 29, 2021
Verified Purchase
Watched the video you sent with the right part and fixed within 20 minutes!!!
Everything was fantastic. Thanks. My brother said I should get a job fixing machine’s
★★★★★
★★★★★
Alexey P - June 23, 2021
Verified Purchase
Easy repair
The part is fine, came fast!
★★★★★
★★★★★
David G - January 15, 2021
Verified Purchase
Worked as expected, arrived quickly, no problem
Would order again from same place.
★★★★★
★★★★★
Richard C - September 26, 2020
Verified Purchase
Good quality and fast Delivery
Received in 2 days and had it up and running in 10 minutes.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 4.2 / 5.0, 25 reviews.
What's this?
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Inlet valve leak
Followed directions on the video and went like a charm. Very impressed with service and video
Other Parts Used:
John from Northport, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
34 of 37 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Inlet valve was leaking
1 - Remove 3 electrical connections 2 - Slide spring clamp back an inch or so on 1 hose. Pull hose off of old unit. Attach the same hose to new unit and reclamp. 3 - Repeat with other 2 hoses 4 - Reconnect electrical connections
Other Parts Used:
Steven from MOBILE, AL
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
11 of 11 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was filling the tub when washer was not in use.
I followed the video and my repair went just like the expert showed on the video. The hardest part was pulling the washer away from the wall and getting enough elbow room to be able to work on the washer. I will definitely come back to this site for my next appliance repair.
Very simple. Watched video. Pulled the washer out to get behind it. Turned off water supply, unplugged it. Unscrewed the screwesholding the top in place, slid top back, lifted it off. Used pliers to open the clamps holding the pipes to the valve - one at a time. And fitted the pipes to new valve, one at a time. SOME WATER REMAINS IN THESE PIPES, SO PUT A TOWEL UNDERNEATH TO CATCH IT. Removed the electrical connectors one at a time and fitted them to the new valve one at a time. Did same to the hot valve - not leaking but decided to replace it before it did leak. Reattached water supply hoses and electric plug. Tested the washer cycle to make sure no leaks. Put top back on and pushed washer back to wall. Apart from the testing, the whole job took 25 minutes. The parts arrived on Day 2 after the order. VERY PLEASED WITH EVERYTHING!
First unplug the machine. Turn the water off to the hoses. Remove the hoses from the machine to make it easier. Remove the screws from the back of the top cover. Pry the front sides with a screwdriver and lift. Standing behind the machine on the left side you’ll see the three solenoids or inlet assembly. Remove the two screws so as to take the inlet assembly out. There are hoses attached to the assembly.
Other Parts Used:
Millie from MANORVILLE, NY
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable)
5 of 6 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water was leaking into washing machine after the washer was shut off
Removed the cover from the washing machine, the two valves(cold & hot) are located in the read top of the machine, removed the hoses to the valves, removed the nut that holds on the valve to the washer and placed new valve into washer and placed the nut back onto new valve, placed the hoses back onto the new valve.
Water was collecting in the machine after it finished its cycle.
Turned off hot and cold water supply. Pulled out machine and disconnected hoses, unplugged power.
Unscrewed 4 screws at back top of machine (holding plastic bracket to cover). Pulled out trays from front where detergent is poured, and removed small screws under trays.
Slid cover back and up. This was the only tricky part. There are pegs that must line up with large holes in cover before you can easily lift cover up. Helps to look from underneath and find pegs on each side.
Using pliers, fully open clamps holding hoses to the inlet valves, and carefully pull off hoses while keeping clamps open with pliers… making sure to keep track of which hose goes to each motor. Take a picture of electrical connectors noting color and sequence of connectors on each inlet valve motor. Pull all connectors off.
Unscrew screws holding each inlet valve to machine. Put new inlet valves in place of old, and screw in place. Reconnect hoses (using pliers to hold open clamps, then slide clamps over tubing and inlet valve connector). Reconnect electrical connectors carefulljng lining up colors of wires and sequence using picture taken in previous step.
Replace cover. Screw all screws back to secure cover. Replace trays.
Figured out how to take off top of washer, look inside for problem, ordered new part, watched video how to replace part. All on line. $65.00 later and my 19 yr old washer is still working awesome.
Other Parts Used:
Denise from LAS VEGAS, NV
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Noticed water underneath the washer. After taking the top of the washer off I noticed that on top of the water inlet valve water was dripping from it.
I actually did the repair exactly as the video showed. If I would have had the part at the time of discovering the problem it would have been about a 45 minute repair from start to finish. Worst part of the whole fix was moving the heavy washer.
Other Parts Used:
Kenneth from DELTA, OH
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
3 of 3 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
3
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
24 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Derek
February 4, 2018
Will this fit the wm2650hva model?
For model number wm2650hva
Hello Derek, Thank you for contacting us. I have researched the model you have provided and have found the part you’re looking for is PartSelect Number: PS11728995 for the Cold water and PartSelect Number: PS3527427 for the Hot. Good luck with the repair!
I'm trying to troubleshoot my problem. After running a load of wash, water clears out, no problems. Then if i don't use the washer for a few days, about 3 cups of water fills the washing machine. It's always to aproximatly the same level and it always takes a few days of nonoperation to fill. I'm trying to figure out what to fix.
For model number WM2233HS
Hello Jenna, thank you for your question. This issue could be the water valve itself, that is leaking into the washer after the unit is done its cycles. Its possible the valve is stuck slightly open and is allowing water to come into the tub. Or, the problem might be that water is coming BACK into the unit after its been pumped out. I would recommend checking the drain hoses, and recommendations for how the unit is set up to be sure that the hoses are not kinked, or have moved. Sometimes, if the hoses are not installed properly, water can't get all the way out of the hoses then some comes back in. If the appliance was installed properly, and the hoses are clear, not kinked and set up properly, the issue is probably with the water valve for the appliance. I hope this helps!
8 people found this helpful.
Was this helpful?
Thank you for voting!
Christina
May 16, 2019
The washer continues to fill what is the part number or is this it for the water inlet valve
For model number RTW4516FW2
Hello Christina, thank you for your question. The water valve for this unit is actually PartSelect Number: PS12349269. Please enter the part number into the site for current price and availability. Good luck with your repair!
7 people found this helpful.
Was this helpful?
Thank you for voting!
David
May 1, 2018
Washer leaking in the front. What do you think is wrong?
For model number WM2016CW/01
Hello David, thank you for your question. The leaking could be coming from one of the water valve, the drain pump, or a hose that has come loose or has cracked or broken. This front load washer also has a large rubber door gasket that can sometimes get ripped and will cause leaking at the front of the unit. I would recommend removing the back panel, and top panel to see if you can locate the leak, then we can provide more information on the parts you would need to fix it! I hope this helps!
6 people found this helpful.
Was this helpful?
Thank you for voting!
Ray
November 23, 2019
I just have one solenoid leaking. Can i just replace the solenoid instead of the whole valve?
For model number WM2010CW
Hello Ray and thanks for writing.
Yes, you can if you can find the correct solenoid. We do not carry this part on its own it comes as part of the water inlet valve. We hope this helps. Please contact us anytime.
4 people found this helpful.
Was this helpful?
Thank you for voting!
David
February 25, 2018
I got this part but i made a simple but critical mistake. I disconnected the hoses before i marked them. I see that they attache to main, prewash and bleach but i dont know the order. Can you please tell me which hose goes to which calve? I cant believe i did that. Please help.
For model number 5221ER1003A
Hi David,
Thank you for your question. There is a video listed with the part on our website that you may reference on how to install the lines. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
KEVIN
November 21, 2018
Water is leaking out the top of the inlet valves. If i replace the part is there something, like high water pressure, that i should be concerned about damaging the replacement as well?Thanks
For model number Kenmore 796
Hi Kevin,
Thank you for your question. Before installing the new water inlet valve, you will need to check the water pressure coming from the where it connects to the water inlet valve to make sure the correct amount is coming out. I hope this helps. Thank you and have a great day!
3 people found this helpful.
Was this helpful?
Thank you for voting!
Jacinta
July 11, 2019
Corrected model# (computer dyslexia!). Should I replace pump and inlet valve if leaking through door bottom? Is one more likely the culprit? Would appreciate if you located correct parts. Thnx.
For model number WM2140C
Hello Jacinta, Thank you for the question. If there is a leak at the door I suggest checking the Door Gasket, PartSelect Number PS3524977 for damage or wear. Hope this helps!
