Dishwasher Circulation Pump with Heater

Hello Alan, thank you for your question. This error indicates that the temperature does not get sufficiently hot. We would recommend replacing the heat pump PartSelect Number PS11724988. I hope this helps!

Hi Jennifer, thank you for your inquiry. If the E09 error code appears on the appliance display it means that your heating element is defective. The noise also appears to be from the Circulation Pump. We would recommend replacing the Circulation Pump with Heater, part number PS11724988. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!

Hello Mathieu, thank you for your question. We have researched the model you have provided, and we would suggest the Circulation Pump, part number PS11724988. If you need help placing an order, our customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!

Hello Steve, thank you for your question. We only sell new OEM parts, none of our parts are used or refurbished. We hope this information is useful.

Hello Dean, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11724988. We hope this helps!

Hello Mark, thank you for your question. If the E09 error code appears on the appliance display it means that your heating element is defective. Yes, the Pump with Heater PS11724988 PS11764931 you had chosen is compatible with your model. We look forward to hearing from you.

Hi Keith, Thank you for your question. The E09 error code means that your appliance is having a problem that is effecting your temperature. What you should do first is disconnect your appliance from the power for at least 5 minutes. Connect it again. If you still have the error code, unfortunately you would have to replace your electronic control board. I hope that helps. Good luck with your repair.

Hello Dave, Thank you for your question. The error code E21 means there is a hard clog formed in the pump area. The blockage paralyzes the work of this part, making draining impossible or at least difficult. The impeller of the pump is damaged or worn out. Also, the E21 code can “pop out” if the impeller is clogged with large debris. We suggest unclogging any debris in the drain hose, and checking the impeller on the pump. We hope this helps!

Hello, Thank you for your question. An E2 error indicates a problem related to the inlet cold water temperature sensor. The sensor may be sensing temperatures outside normal parameters or the sensor itself may be defective. We hope this helps.

Hello Jeff, thank you for contacting us. According to our research, the E20 error is indicated when the circulation pump is faulty. We would recommend checking the circulation pump, part number PS11724988. You may also need to check the pump's resistance by using a multimeter. We hope this solves your problem!