Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Jean-Claude P - December 7, 2022
Verified Purchase
It fit
Not the same model but worked very well.
★★★★★
★★★★★
Richard S - July 22, 2021
Verified Purchase
The exact part
There are many varieties on that part. There is a warning on my fridge about getting a very specific part number. Well... I got that exact part number. Congrats.
★★★★★
★★★★★
James H - April 30, 2021
Verified Purchase
Everything went successfully,
Good price, delivery on time. Would do it again.
★★★★★
★★★★★
Vanda S - July 8, 2020
Verified Purchase
Water inlet valve - works great
I received this part in the time the order desk told me to expect it. It was easy to replace it and works great.
★★★★★
★★★★★
Glenn D - November 8, 2018
Verified Purchase
Water Inlet Valve "exact" match
I received the part not exactly like the picture, nor the part I was replacing. Another site (where I bought the refrigerator that has since gone out of business in Canada) had an instructional video where the technician also pointed out this change that the manufacturer had chosen to remove the extra extension connecting the water line to this splice point as it really served no other purpose. Instead, that tube going into the refrigerator was spliced directly to the water line. If I had determined that before starting the repair, i might have gotten away without having to replace the whole part. I could have simply bypassed that connection point and saved the extra cost. Regardless, that part has now been changed and the refrigerator is operating properly again.
< Prev
1
Next >
Customer Repair Stories
Average Repair Rating: 3.8 / 5.0, 4 reviews.
What's this?
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
valve leaking due to being frozen in storage
removed old valve after finding out it leaked really bad. Got on line ordered new valve and it arrived in one day. great service from you guys. there was a little difference in the valves, push in line fitting on the new valve, screw in fittings on the old one. took less than 20 minutes to install and works great, thanks
Other Parts Used:
Jerome from Decatur, IL
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
54 of 118 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Ice Maker was dripping excess water and making large icicles inside the freezer.
Found several videos online showing this process. It was difficult to separate the main water line input module from the original water valve, but persistence paid off and I was able to separate them using a large flat head screwdriver by twisting in grove on the back side. Putting in the new valve system was really easy once you cut the old screw nut sections off the lines. The output lines are different sizes so you can't mess that part up. Just be careful when dealing with the 3rd line that is the same as one of the output lines in size. I just marked mine with a permanent marker so I didn't get them confused or swapped around. Another problem was the two pieces did not fit together like I expected because of design differences. I was able to mount them one above the other by using one of the screw holes for the cardboard back cover to mount the main water input module. Everything works fine now. No leaks.
Other Parts Used:
Brian from DAYTONA BEACH, FL
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers, Wrench set
9 of 14 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
water was leaking from ice maker causing a ice glazicer in the freezer
shut off water, unplug refrigerator, removed panel on back, took 2 screws that hold the valve in place, disconnected 3 hoses and 2 electrical connection reversed the procedure for the new one.
Other Parts Used:
Monty from ENID, OK
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Water dispenser barely dispersing and ice maker making little to none small cubes
Unplugged the appliance. Removed back dust cover. Removed screws holding inlet in place. Removed water lines and plugs. Replaced inlet. Attached water lines and plugs. Attached back to appliance. Put dust cover back on. Did not solve this issue.
Other Parts Used:
Daniel from HENDERSON, KY
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
2 of 2 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
9 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Wayne
March 26, 2018
My ice maker stopped making ice after changing the filter. Still get water just fine at the door spout though. Any ideas where to start diagnosis?
For model number GD2NHAXMB00
Hi Wayne,
Thank you for your question. If you are getting water from the dispenser, but no ice from the ice dispenser, the issue is either the ice maker, the water inlet valve of the main electronic control board. Try to do a manual cycling of the ice maker to see if it works correctly, you will need to use a multimeter to check the water inlet valve and the main electronic control board. I hope this helps. Thank you and have a great day!
4 people found this helpful.
Was this helpful?
Thank you for voting!
Carolyn
July 31, 2019
Does the water inlet valve supply the pressure to the fridge or does it just open and close the solenoid?
For model number 106.55202400
Hi Carolyn, thank you for your question. Your appliance does not have pressure like that really. The water inlet valve opens or closes and the influx of water goes up through the tubes and exits where it is being called to. If anything the water pressure is coming from your own home. I hope that helps. Good luck with your repair.
3 people found this helpful.
Was this helpful?
Thank you for voting!
Kathryn
April 24, 2019
The ice maker is not drawing water. The water dispenser works fine. Should i replace the water inlet valve? Thank you.
For model number ED2SHAXMB10
Hi Kathryn, thank you for your question. If you are getting water from the dispenser, but no ice from the ice dispenser, the issue is either the ice maker, the water inlet valve of the main electronic control board. Try to do a manual cycling of the ice maker to see if it works correctly, you will need to use a multimeter to check the water inlet valve and the main electronic control board. Good luck with your repair.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Glenn
July 24, 2019
Immediately after changing filter, failed to get water flow to water dispenser or ice maker and i have tried a second filter and changed the water/ice valves control module at the rear of the appliance.
Hello Glenn, thank you for inquiring. You will want to consider either the Micro Switch part number PS11738948 or this Water Inlet Valve part number PS11723179 for your model. We hope this helps!
Was this helpful?
Thank you for voting!
James
October 9, 2017
Ice maker will not stop making ice, you can turn it of up top, the laser beam blinks, turn off and it still makes ice.
For model number GS2SHEXNS00
Hi James,
Thank you for your question. There are a couple of parts that could cause a problem like this, however it seems that it may be your emitter and receiver boards that are the issue. I would suggest testing your valve, to see if it is working correctly. Then testing your ice maker as well. If both of those parts are checking out good, then it is likely it is your boards that are the problem. Good luck with your repair.
Was this helpful?
Thank you for voting!
Basil
October 21, 2021
The fridge makes ice perfectly, but vibrates & makes pulsating sounds when water is called for, which comes out in lower volume than usual (spurts in sync with the pulsating sounds)
For model number ED2KHAXVS03
Hello Basil, thank you for writing. The most likely issue is the Water inlet Valve PartSelect Number PS11723179 .Good luck with your repair.
Was this helpful?
Thank you for voting!
Mark
March 1, 2022
Does the price listed by the part
Include shipping
Hello Mark, Thank you for your inquiry. The price listed by the part is for the part only and does not include taxes and shipping. The shipping is showing on the purchase information screen and the taxes are calculated when you enter your shipping address. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Jennifer
May 27, 2022
Water dispenser will not stop dispensing water.
For model number 106.56824604
Hi Jennifer,
Thank you for your question. If your dispenser will not stop dispensing water, you may have a stuck water dispenser button. Sometimes if you press the button too hard it will become stuck. Sometimes pressing the button again will stop it. If this does not help, turn the water off to the refrigerator and unplug it for 10 minutes. You may also need to check the dispenser arm, the dispenser control board and the water inlet valve to see if they are working correctly. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
Ronald
February 29, 2024
Whirlpool part number W10822681. Our old water inlet valve was leaking out of the top of one of the solenoids. Is this a normal place for this to leak? There is a hose coming out the bottom of both solenoids and one coming in the side. No leaking around or from any of these hoses. Just leaking out the top of the solenoid itself. Please let me know if replacing the water inlet valve take care of this?
For model number 10656834604
Hello Ronald, thank you for reaching out. Based on the description that you have provided, we would recommend replacing the water inlet valve, part number PS11723179, to fix the issue. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
